• Journal of Energy Engineering
• /
• v.27 no.1
• /
• pp.51-58
• /
• 2018

In this paper, we reported that the influence of advanced functional mineral filler calcium carbonate ($CaCO_3$) extracted from oyster shell waste, which are rich mineral sources of $CaCO_3$. Oyster Shells, available in abundance, have no eminent use and are commonly regarded as waste. Their improper disposal causes a significant level of environmental concern and also results in a waste of natural resources. Recycling shell waste could potentially eliminate the disposal problem, and also turn an otherwise useless waste into high value added products. Oyster shell waste calcination process to produce pure lime (CaO) which have good anti-microbial property for waste water treatment and then focuses on its current applications to treat the coffee waste and its effluents for biological treatment and utilization as a fertilizers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.459-465
• /
• 1995

The ether extract of Salviae miltiorrhizae Radix(SMR) was fractioned to give five subfractions, so that two subfractions of them were recrystallized to yield each pure diterpene quinone pigment. On the basis of spectral evidence, these two compounds were identified as tanshinone II and crytotanshinone. Cryptotanshinone exhibited both of a potent platelet anti-aggregating activity in vitro and a potent antimicrobial activity. GC-MS analysis of the other extract showed that tanshinone II was contained in the largest proportion of all the diterpene quinones. In addition, GC-MS analysis gave other valuable analytical informations.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.192-193
• /
• 2006

In this paper, a co-axial type ozonizer varied with discharge gap was designed and manufactured for investigating (1) discharge characteristics with variation of output voltage power supply, flow rate and gap distance (2) ozone generation and solubility characteristics with variation of flow rate, gap distance and discharge power. Pure oxygen was used as process gas of the co-axial type ozonizer.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.381-385
• /
• 2003

In this paper, a co-axial type ozonizer varied with discharge gap was designed and manufactured for investigating $\circled1$ discharge characteristics with variation of output voltage power supply, flow rate and gap $\circled2$ ozone generation characteristics with variation of flow rate, gap and discharge power. pure oxygen was used as process gas of the co-axial type ozonizer. In this paper, a double cylindrical type superposed silent discharge type ozonizer which internal electrode can be produced a vacuum has been designed and manufactured. Discharge and ozone generation characteristics have been investigated in accordance with output voltage of power supply, flow-rate, discharge power and vacuum of internal electrode.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.237-239
• /
• 1995

The inverter for UPS system is required to satisfy pure sinusoidal output voltage with very low THD(Total Harmonic distortion). This paper proposes a TMS320c31 digital signal processor based predictive instantaneous control scheme of inverter. The proposed scheme is able to satisfy the conditions; high capability, high efficiency, low audible noise and robustness of inverter. The transient state characteristics of proposed inverter has been improved. in case of power failure or recovery, nonlinear load, sudden load change or parameters variations. Finally, the performance of the proposed inverter is shown and discussed by simulation and experiment.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.10
• /
• pp.1145-1148
• /
• 1999

1H NMR spectra of methyl-, ethyl-, propyl-, isopropyl-, butyl-, N-methylethyl-, N-methylpropyl-, and N-methylisopropylamine coordinated to the paramagnetic 11-tungstocobalto(II)silicate anion (SiW11Co) in dimethylsulfoxide-d6 or dimethylformamide-d7 are reported. For these complexes the ligand exchange is slow on the NMR time scale and pure 1H NMR signals have been observed at room temperature. No complex is detected in D2O. From the pseudocontact shifts of the CH2 and CH3 groups in ethylamine the energy of the gauche conformers with respect to the anti conformer is estimated. Two diastereotopic protons in the CH2 group of N-methylethylamine have quite different chemical shifts especially at low temperatures (e.g. 48.5 vs. 19.4 ppm at -10℃). This may be attributed mainly to the different positions of the two protons in the most stable (gauche) conformer.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.644-651
• /
• 2021

Alkyl amines are widely used in various industries. Nowadays these are also used in CO₂ capture technology because amines react with CO₂ and remove it from the flue gas. To make the amines more compatible towards this technology, physico chemical properties may be altered by mixing with other solvents. In the present report, we measured the refractive properties of pure diisopropylamine (DIPA) (1) + isomeric butanol (2) at 298.15 K to 308.15 K. The 𝚫n values were positive for DIPA + n-butanol or sec-butanol or isobutanol or tert-butanol mixtures. The measured data was correlated with Redlich-Kister equation. The excess molar volume data were predicted from refractive index data using Nakata and Sakurai model. The experimental data were also predicted by various correlations, and the prediction capability of these correlations was reported through standard deviation. Further, the deviation in refractive index (𝚫n) data was interpreted by the consideration of specific molecular interactions between DIPA and isomeric butanol.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.3 no.1
• /
• pp.32-43
• /
• 1995

Ni-Ti alloy has excellent corrosion resistance, biocompatibility, shape memory effect and superelasticity, so it has been used widely in biomedical fields. But it has difficulty in casting due to its high melting temperature and oxygen affinity at high temperature. Recently it has been attempted to cast Ni-Ti alloy using new casting machine and investment. The purpose of this study was to examine the superelastic behavior of cast shape memory Ni-Ti alloy and to compare the mechanical properties of the cast shape memory alloy with those of commercial alloys for removable partial denture framework. Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was cast with dental argon-arc pressure casting machine and Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy, pure titanium were cast as reference. Experimental cast Ni-Ti alloy was treated with heat($500{\pm}2^{\circ}C$) in muffle furnace for 1 hour. Transformation temperature range of cast Ni-Ti alloy was measured with differential scanning calorimetry. The superelastic behavior and mechanical properties of cat Ni-Ti alloy were observed and evaluated by three point bending test, ultimate tensile test, Vickers microhardness test and scanning electron microscope. The results were as follows : 1. Cast Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was found to have superelastic behavior. 2. Stiffness of cast Ni-Ti alloy was considerably lesser than that of commercial alloys for removable partial denture. 3. Permanent deformation was observed in commercial alloys for removable partial denture framework at three point bending test over proportional limit(1.5mm deflection), but was not nearly observed in cast Ni-Ti alloy. 4. On the mechanical properties of ultimate tensile strength, elongation and Vickers microhardness number, cast Ni-Ti alloy was similiar to Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy and pure titanium. With these results, cast Ni-Ti alloy had superelastic behavior and low stiffness. Therefore, it is suggested that cast Ni-Ti alloy may be applicated to base metal alloy for removable partial denture framework.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.76-81
• /
• 2018

Au@ZnO core-shell nanoparticles (NPs) were prepared by a simple method followed by heat-treatment for gas sensor applications. The advantage of the core-shell morphology was investigated by comparing the gas sensing performances of Au@ZnO core-shell NPs with pure ZnO NPs and different wt% of Au-loaded ZnO NPs. The crystal structures, shapes, sizes, and morphologies of all sensing materials were characterized by XRD, TEM, and HAADF-STEM. Au@ZnO core-shell NPs were nearly spherical in shape and Au NPs were encapsulated in the center with a 40-45 nm ZnO shell outside. The gas sensing operating temperature for Au@ZnO core-shell NPs was $300^{\circ}C$, whereas it was $350^{\circ}C$ for pure ZnO NPs and Au-loaded ZnO NPs. The maximum response of Au@ZnO core-shell NPs to 1000 ppm CO at $300^{\circ}C$ was 77.3, which was three-fold higher than that of 2 wt% Au-loaded ZnO NPs. Electronic and chemical effects were the primary reasons for the improved sensitivity of Au@ZnO core-shell NPs. It was confirmed that Au@ZnO core-shell NPs had better sensitivity and stability than Au-loaded ZnO NPs.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.215-220
• /
• 2005

This paper aim, to measure and evaluates the technical efficiency, pure technical efficiency and scale efficiency with two inputs and four outputs with the use of DEA(Data Envelopment Analysis) in Korean RCC(Rescue Co-ordination Center)/RSC(Rescue Sub-Center). Several conclusion emerge. first the average efficiency of overall technical efficiency measure about $91.03{\%}$ and pure technical efficiency $96.80{\%}$ is much large then scale efficiency $93.83{\%}$. It means that inefficiency has much more to do whit the inefficient utilization of resources rather then the scale of production. second, DRS(decreasing return to scale)is Tongyeong and IRS(increasing return to scale) is Incheon, Taean, Gunsan, Yeosu, Ulsan, Donghae in RCC/RSC finally, inefficiency RCC/RSC have to benchmarking with reference sets.