• 한국표면공학회지
• /
• 제49권2호
• /
• pp.111-118
• /
• 2016

A method to quantitatively analyze the defects formed by the hydrogen evolution during electroplating was suggested based on the theoretical approach of the small angle neutron scattering technique. In case of trivalent chrome layers, an isolated defect size due to the hydrogen evolution was about 40 nm. Direct and pulse plating conditions gave the average defect size of about 4.9 and $4.5{\mu}m$ with rod or calabash shape, respectively. Current density change of the pulse plating from $1.5A/dm^2$ to $2.0A/dm^2$ enlarged the average defect size from 3.3 to $7.8{\mu}m$. The defect morphology like rod or calabash was originated by inter-connecting the isolated defects. Small angle neutron scattering was useful to quantitatively evaluate defect morphology of the deposit.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.67-74
• /
• 2008

이 논문은 수중의 침 대 평판 전극에서 임펄스전안의 크기와 극성, 물의 저항률 등과 같은 다양한 조건에 따른 방전특성을 나타낸다. 스트리머코로나가 침전극 끝단에서 발생하며 평판전극을 향하여 진전하여 최종적으로 전극 사이가 섬락에 이르게 된다. 동일한 전압에서 물의 저항률이 작을 때 스트리머코로나의 분기로는 물의 저항률이 클때 보다 더욱 굵고 밝게 나타났다. 정극성에 비해서 부각성 스트리머코로나가 더욱 많은 분기로를 형성하며 더욱 넓게 퍼지는 것으로 나타났다. 스트리머코로나의 개시 후 방전의 진전과 더불어 수 백 [mA]에서 수 [A]에 이르는 많은 수의 전류펄스가 발생하였다. 정극성의 절연파괴까지의 지연시간은 부극성에 비하여 매우 짧았으며, 전극에 공급되는 전구방전에너지는 물의 저항률에 반비례하였다.

• 한국전자파학회논문지
• /
• 제24권8호
• /
• pp.772-780
• /
• 2013

고고도 핵폭발로 생성되는 고출력 전자기 펄스(HEMP)에 의해 복사성 방해 환경과 케이블 커플링에 의한 전도성 방해 환경이 조성된다. IEC 61000-2-10은 HEMP의 전도성 방해 환경에 대하여 정의한다. IEC 61000-5-5에는 HEMP 전도성 방해에 대한 보호 장치의 특성이 규정되어 있다. IEC 61000-4-24는 보호 장치에 대한 특성 측정 방법을 다루고 있다. IEC 61000-4-24:1997은 소형 보호 소자에 대한 측정 방법을 기술하고 있으나, 최근 많이 사용되고 있는 보호 소자와 필터가 결합된 형태의 조합형 필터에 대한 측정 방법은 미비한 상태이다. HEMP 전도성 방해 신호는 50 MHz 이하의 주파수 스펙트럼을 포함하고 있으므로 측정 셋업을 구성하는데 있어서 케이블의 굵기, 길이, 접지평면으로부터의 높이 등의 측정 셋업 파라미터의 특성을 파악하는 것이 중요하다. 본 논문에서는 HEMP 전도성 방해 전류 파형의 주파수 스펙트럼을 고려하고, 측정셋업에서 존재하는 케이블 파라미터의 영향을 분석하여 최적의 PCI 측정 방법을 도출하고자 한다.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.937-944
• /
• 2011

Studies have been carried out in order to reduce fuel-cladding chemical interaction (FCCI) behavior of metallic fuel in sodium-cooled fast reactors (SFR) using an electroplating technique. A $20{\mu}m$ thick Cr layer has been plated by the electrochemical method in the Sargent bath over the HT9 (12Cr-1Mo) clad material and diffusion couple tests of the U-10Zr metallic fuel as well as the rare earth alloy (70Ce-29La) have been conducted. The results show that the Cr plating can prevent FCCI behavior along the fuel-clad interface. However, cracks developed through the thickness during plating, which resulted in the migration of some fuel constituents. Variation of bath temperature, application of pulse current, and post heat treatment have been conducted to control such cracks. We found out that some conditions like the pulse current and the post heat treatment enhanced the layer property by reducing the internal cracks and improving the diffusion couple test.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.98-107
• /
• 2009

기존의 하드 스위칭 고주파 PWM DC-DC 컨버터는 펄스 변조 캐리어 주파수의 고주파화를 수반하고, 전력용 반도체 스위칭 소자의 스위칭 손실의 증대나 스위칭 과도현상이 수반된 전압 서지나 전류 서지에 의한 EMI 등의 문제점들이 있다. 이러한 문제를 효과적으로 해결하기 위해 본 논문에서는 새로운 소용량 승압형 PWM 쵸퍼 회로의 동작원리를 서술하고, 시뮬레이션과 실험을 통하여 특성을 도출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1899-1901
• /
• 1998

A five-level VSI(Voltage Source Inverter) is introduced as a SVC(Static Var Compensator) like a large scale power source. The problems in using SVC are that the power device can easily be destroyed by voltage unbalance and accurate reactive power control is difficult because of voltage variation. A asymmetrical PAM(Pulse Amplitude Modulation) switching pattern is proposed to solve this problem and analyze both fundamental component and harmonic current in the system. Through experimental results of 3.5 kVA experimental test system. It is confirmed that DC capacitor voltage can be controlled by asymmetrical PAM switching pattern control.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.223-228
• /
• 1999

A five-level VSI(Voltage Source Inverter) is introduced as a SVC(Static Vu Compensator) like a large scale power source. The problems in using SVC are that the power device can easily be destroyed by voltage unbalance and accurate reactive power control is difficult because of voltage variation. A asymmetrical PAM(Pulse Amplitude Modulation) switching pattern is proposed to solve this problem and analyze both fundamental component and harmonic current in the system. Through experimental results of 3.5 kVA experimental test system, It is confirmed that DC capacitor voltage can be controlled by asymmetrical PAM switching pattern control.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.556-563
• /
• 2001

본 논문에서는, 기존의 PWM 방식의 컨버터와 공진형 컨버터의 단점을 보완하면서 이들의 장점을 가지는 새로운 형태의 ZCT 벅 컨버터를 소개한다. 제안한 회로는 기존의 벅 컨버터에 보조화를 추가하여 주 스위치와 다이로드의 스위칭천이 순간에만 소프트 스위칭 조건을 제공함으로써 전체적인 동작은 벅 컨버터와 동일하게 된다. 아울러 보조회로에서의 부가적인 손실은 존재하지 않는다. 본 논문에서는 제안된 회로의 동작을 분석하고 이를 바탕으로 보조회로에서의 소자값 결정에 도움이 되는 설계 방식을 제공한다. 또한 제안한 회로의 동작 및 유용성을 확인하기 위하여 실험을 행하였다.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.65-80
• /
• 2020

In order to protect a structure over its full life cycle, a novel tuned mass damper (TMD), the so-called semi-active eddy current pendulum tuned mass damper (SAEC-PTMD), which can retune its frequency and damping ratio in real-time, is proposed in this study. The structural instantaneous frequency is identified through a Hilbert-Huang transformation (HHT), and the SAEC-PTMD pendulum is adjusted through an HHT-based control algorithm. The eddy current damping parameters are discussed, and the relationship between effective damping coefficients and air gaps is fitted through a polynomial function. The semi-active eddy current damping can be adjusted in real-time by adjusting the air gap based on the linear-quadratic-Gaussian (LQG)-based control algorithm. To verify the vibration control effect of the SAEC-PTMD, an idealized linear primary structure equipped with an SAEC-PTMD excited by harmonic excitations and near-fault pulse-like earthquake excitations is proposed as one of the two case studies. Under strong earthquakes, structures may go into the nonlinear state, while the Bouc-Wen model has a wild application in simulating the hysteretic characteristic. Therefore, in the other case study, a nonlinear primary structure based on the Bouc-Wen model is proposed. An optimal passive TMD is used for comparison and the detuning effect, which results from the cumulative damage to primary structures, is considered. The maximum and root-mean-square (RMS) values of structural acceleration and displacement time history response, structural acceleration, and displacement response spectra are used as evaluation indices. Power analyses for one earthquake excitation are presented as an example to further study the energy dissipation effect of an SAECPTMD. The results indicate that an SAEC-PTMD performs better than an optimized passive TMD, both before and after damage occurs to the primary structure.

• 한국응급구조학회지
• /
• 제14권3호
• /
• pp.71-81
• /
• 2010

Purpose: To minimize an interruption in chest compression, reduce the hands-off time, the American Heart Association has recommended the ratio of chest compression to ventilation ratio to 30:2 from 2005 CPR guideline to 2010 CPR guideline. However, current studies have shown that the hands-off time was > 10 seconds with that method. For this reason, we devised new CPR method that a ventilation to chest compression ratio of 2:30 to reduce pt assessment time and skipped the assessment step of carotid artery pulse would be a more effective way to reduce the hands-off time & the time to set the CPR. According to the more detailed purpose are listed below. 1) We would like to confirm efficiency of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 to reduce the hands-off time & the time to set the CPR. 2) We would like to evaluate possibility of increasing for chest compression accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 3) We would like to evaluate possibility of increasing for ventilation accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 Methods: According to 2005 American Heart Association Guidelines, 60 paramedic students(20 students X freshmen, sophomore, junior) performed 5 cycles of 3~ chest compressions : 2 ventilations after A, B, C evaluation with Laerdal Resusci R Anne SkillReporters. After 5 minutes rest, the 60 students performed 5 cycles of 2 ventilations : 30 chest compressions after A, B evaluation with the manikins between 13 and 17 September 2010. The short reports including speed & accuracy of chest compression, respiratory, CPR cycle were gained from the manikins. Hands-off times were measured by assistants. Results: Recently, the importance of high quality CPR was emphasized in order to perform the CPR faster and more accurate. To find out improving the conventional CPR method, we switch the procedure of the compression and the ventilation. By switching the procedure back and forth, we are able to compare the effectiveness of CPR between two type of CPR method which are 2:30 and 30:2 methods. 2:30 is that the breaths is delivered twice, first and perform 30 compressions while 30:2 perform 30 compressions first and give 2 breaths followed by the ABC method. Also, we verify the effectiveness of the hands off time, compression accuracy of the compression through the comparison of the two procedure as mentioned earlier. Consequently research verified that 2:30 is the efficient by providing faster set up delivering more accurate chest compression. Conclusion: 2:30 can minimize a time delay from cardiac standstill until starting the chest compression. In addition, hands-off time which is an interruption in chest compression can be shortened by 2:30 method, which result to effective oxygenation of coronary artery & maintenance of the bloodstream. Once again, performing the 2:30 method provide lessen hands off time and increase the accuracy of the chest compression.