• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.348-351
• /
• 2000

There have been significant advances in thyratron performance in recent years. these advanced waveforms have increased the complexity and cost of drive circuits. Thyratrons can reliably switch anode voltages up to 40kV and conduct peak currents up to 10kA or more. So stable thyratron drivers are essential for reliable high voltage pulse modulators. In order to operate thyratron well, thyratron driver need high repetition rate, fast rising time and low jitter. In this paper, used power MOSFET/transformer combinations. Designed thyratron driver is satisfied requirements and experimental results are presented to confirm.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.638-641
• /
• 2001

Connectorless power transmission and supply are the power transfer device revealed by resonant inverter or transformer using inductant device. Recently, on power supply have been going on frequently, so several power supply circuit forms are announced. But Compared with the circuit of previous paper, instead of the circuit composed of a simple sylinder Ferrit, I was manufacture in a sylinder that It was a double overlab to a sylinder and I was followed a double flux in inner flux path. Above all, for practicalization, supply circuit operation character analysis and development of controller should be preceded. According to this paper, power transmission and supply analyze characters and design control circuit like the analysis of general resonant inverter for power transmission. They compose the circuit to get sinusoid wave output voltage using pulse width modulation control mode. For Supply, output wave form through power track and power pick-up of magnetic inductance includes ripper component. So I intend to design the controller including filter and regulator, compare analyze theoretical result with real measurement value and then show you their practicality

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1632-1642
• /
• 2014

This paper presents an interleaved resonant converter to reduce the voltage stress of power MOSFETs and achieve high circuit efficiency. Two half-bridge converters are connected in series at high voltage side to limit MOSFETs at $V_{in}/2$ voltage stress. Flying capacitor is used between two series half-bridge converters to balance two input capacitor voltages in each switching cycle. Variable switching frequency scheme is used to control the output voltage. The resonant circuit is operated at the inductive load. Thus, the input current of the resonant circuit is lagging to the fundamental input voltage. Power MOSFETs can be turn on under zero voltage switching. Two resonant circuits are connected in parallel to reduce the current stress of transformer windings and rectifier diodes at low voltage side. Interleaved pulse-width modulation is adopted to decrease the output ripple current. Finally, experiments are presented to demonstrate the performance of the proposed converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.30-37
• /
• 2011

This paper presents a circuit configuration of multilevel inverter to synthesize a large number of output voltage levels by connecting a full-bridge inverter to a 5-level inverter in series. We analyze the characteristics by computer-aided simulations and experiments when it has input voltage sources which have the same and the power of three in the amplitude. In addition, it is compared with the conventional transformer based multilevel inverter.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.353-354
• /
• 2014

본 논문은 대기전력저감 및 정확한 출력전압 제어가 가능한 새로운 방식의 SSR(Secondary Side Regulator) 회로를 제안한다. 제안방식은 기존의 1차 측 IC를 2차 측으로 옮김으로써 기존의 SSR의 장점인 정확한 출력전압의 제어가 가능하다는 점과 포토커플러 및 TL431을 사용하지 않는 방식이므로 대기전력저감 측면에 있어 유리한 장점을 갖는다. 또한 절연된 1-2차 측간 신호전송방법에 있어 사이즈가 작고 가격이 저렴한 CT(Current Transformer)를 사용하여 Pulse edge의 전달을 통해 제어를 한다. 제안회로의 타당성 검증을 위하여 이론적 해석과 10W 급 플라이백 컨버터의 실험결과를 통해 증명하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.87-93
• /
• 2020

This study proposes a gate driver that operates semiconductor switches in the bipolar pulsed power modulator. The proposed gate driver was designed to receive isolated power and synchronized signals through the gate transformer. The gate circuit has a separate delay in the on-and-off operation to prevent a short circuit between the top and bottom switches of each leg. On the basis of the proposed gate circuit, a bipolar pulsed power modulator prototype with a 2.5 kV/100 A rating was developed. Finally, the bipolar pulsed power modulator was tested under resistive load and plasma reactor load conditions. It is verified that the proposed gate driver can be applied to a bipolar pulsed power modulator.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.895-898
• /
• 1993

The objective of the study is to design and develope a 6kW DC/DC converter with bidirectional power-flow capability. The DC/DC convener topology used in the study is the full-bridge(FB) pulse width modulated convener using ZVS. High-frequency transformer is included to provide isolation between the source and loads. This paper includes simulation and experimental results of the proposed convener.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1425-1427
• /
• 2005

In this paper, with loosely coupled transformer series-parallel resonant type DC/DC converter is analyzed. To get more efficient operating mode of the series-parallel resonant type DC/DC converter, theoretical analysis using normalized parameters are accepted. The proposed converter must be operated in Pulse Frequency Modulation(PFM) switching pattern for the Zero Voltage Switching(ZVS) operation. According to PFM control method, the output voltage of the proposed circuit can be controlled.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.444-450
• /
• 2008

There are several ways to bond to building grounding systems for reducing GPR(ground potential rise) and EMI resulting from power system faults or lightning stroke to building. In order to verify effective bonding practice, the GPR and voltage of equipment due to the direct stroke to building are calculated with ATP-EMTP model for transformer, transmission line and MOV(Metal oxide varistor). The simulated model shows a satisfactory accuracy compared with experimental result for the $8/20{\mu}s$ simulated current pulse. It is observed that separate grounding can cause dangerous voltage to the building equipment and the performance of surge protective device can improve when it is installed to the protected equipment in distance as short as possible.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1888-1889
• /
• 2007

The power source of inverter welder stable power of low voltage and high current. Because if shouldn't be, it is caused to spark between the parent metal and the peak. So that, we designed to be base on high frequency transformer and reactor of DC part. Then, we optimized control of PWM, current rising slant, voltage, current, pulse current and 인버터 out-put voltage. Also we designed PCB for EMI and noises.