• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1817-1819
• /
• 2004

From the plasma application point of view, electron temperature and density are one of the most important parameters for plasma process. But it is only available to control plasma by adjusting external factors like gas pressure and input power. In this paper, pulse-modulated plasma is generated by modulating 13.56GHz RF power with 1, 5, 10kHz pulse. And Langmuir probe technique is used to study the distribution of electron temperature and density. When modulated pulse is off, electron temperature decreases gradually in form of exponential decay. The value t of exponential decay slope is 33.619, 13.834, 10.803 in 1kHz. 5kHz. 10kHz. This implies that this method can be used to control electron temperature and density.

• 전기화학회지
• /
• 제15권3호
• /
• pp.115-123
• /
• 2012

리튬이차전지의 수요가 소형 휴대용 전자기기에서 중대형 전기자동차와 에너지저장장치로 변화함에 따라, 요구되는 전지 특성도 크게 달라지고 있다. 10년 이상의 장기 신뢰성, 팩 수준의 안전성, 가격 경쟁력 확보 등 기존 소형 전지보다 크게 강화된 요구 조건뿐만 아니라, 고출력 특성도 함께 필요로 한다. 그런데, 출력을 측정하기 위해서는 전압과 전류가 동시에 측정 및 제어되어야 하기 때문에, 기존의 단위셀 용량 측정보다 훨씬 어렵다. 또한, 측정 방법의 선택뿐만 아니라 출력유지시간, 충전상태(State-of-Charge, SOC), Cut-off 조건, 측정온도 등의 측정 조건에 따라서도 그 측정값이 크게 달라지는 경향이 있다. 본 논문에서는 HPPC (Hybrid Pulse Power Characterization)법, J-pulse(Japan Electric Vehicle Association Standards, JEVS D 713)법, 정출력 측정법(Constant Power Measurement)의 측정 원리 및 실제 실험에 어떻게 적용해야 하는지 설명하고, HEV(Hybrid Electric Vehicle)용 단위셀을 이용해 출력법간 측정 결과를 비교 분석한다.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.70-75
• /
• 2014

본 논문에서는 데이터 통신 및 위치 인식이 가능한 IR-UWB(Impulse Radio Ultra-Wide Band) 송수신기 회로를 제안한다. UWB 수신기는 에너지 검출 방식의 OOK(On-Off Keying) 변조가 가능하도록 설계가 되었다. UWB pulse generator는 디지털 로직을 이용하여 설계되었으며, UWB 신호 송신시 발생할 수 있는 Side lobe를 제거하기 위한 가우시안 필터가 적용되었다. 측정된 수신기의 감도는 4 GHz 중심주파수와 1 Mbps PRF(Pulse Repetition Frequency)에서 -65 dBm으로 측정이 되었으며, 펄스당 에너지 효율은 20.6 pJ/bit로 측정되었다. 1.8 V 전원에서 DA를 포함한 전류 소모는 수신기과 송신기가 각각 27.5 mA와 25.5 mA이다.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.68-74
• /
• 2014

1 N급 단일추진제 추력기 개발모델의 장기수명 연소시험 동안 펄스모드 성능 특성 및 성능 추이를 살펴보았다. 응답 시간의 경우 주입압력조건에 따른 편차가 상대적으로 크지 않았으며, 점화지연, 반응시간, 하강시간이 각각 32-35 ms, 86-91 ms, 89-98 ms인 결과를 보여주었다. 안정화된 펄스 영역에서 주입압력조건에 따라 임펄스 비트는 $3{\sigma}$ 기준 1.41, 1.32, 2.10%의 뛰어난 재현성을 보여주었다. 장기수명 연소시험 동안 임펄스 비트가 다소 감소하지만 그 감소폭은 제한적이며, 따라서 펄스모드 성능이 유지되었다. 추력 중심 지연 또한 장기수명 연소시험 동안 일정한 것을 확인할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.751-753
• /
• 1999

In this paper, a simple SR method of AC motor has introduced. The method achived by appling the Pulse-Width Modulation(PWM) method to control the ON and OFF time of motor. The method is simple, practicable and has no problem of shift and out of control which is existed in SR method of SCR.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.174-180
• /
• 2008

전원을 on/off하는 스위칭 방식을 이용한 펄스 증폭기는 입력 신호를 변조하는 방식에 비해 효율 및 잡음 특성이 우수하며, 입력단에 별도의 펄스 변조기가 필요 없어 회로가 간단하다. 현재 스위칭 방식의 펄스 증폭기는 스위칭 회로의 특성 상 rise 시간에 비해 fall 시간이 길어지는 단점이 있다. 본 논문에서는 fall 시간을 개선한 스위칭 회로를 제안하였다. 펄스 증폭기에 제안한 스위칭 회로를 적용하여 측정한 결과, 펄스 출력이 27 dBm에서 rise/fall 시간이 각각 5.7 ns, 21.9 ns인 결과를 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1829-1832
• /
• 2004

We have developed a new femtosecond probe technique by using stimulated Raman spectroscopy. The cross phase modulation in femtosecond time scale associated with off-resonant interaction was shown to be eliminated by integrating the transient gain/loss signal over the time delay between the Raman pump pulse and the continuum pulse. The stimulated Raman gain of neat cyclohexane was obtained to demonstrate the feasibility of the technique. Spectral and temporal widths of stimulated Raman spectra were controlled by using a narrow band pass filter. Femtosecond stimulated Raman spectroscopy was proposed as a highly useful probe in time-resolved vibrational spectroscopy.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.16-18
• /
• 2009

A three-terminal hybrid-aligned nematic liquid crystal (3T-HAN LC) cell capable of fast turn-off switching is proposed in this paper. By employing the relaxation process initiated by an electric-field pulse, a fast turn-off time of less than 1 ms can be obtained through optically hidden relaxation. A low operating voltage and high transmittance were confirmed through simulations and experiments.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.624-630
• /
• 2017

In this study, we investigated the overpotential of precipitation related to the catalytic activity of electrodes on the initial process of electrodeposition of Co and Co-Ni alloys on polycrystalline Cu substrates. In the case of Co electrodeposition, the surface morphology and the magnetic property change depending on the film thickness, and the relationship with the electrode potential fluctuation was shown. Initially, the deposition potential(-170 mV) of the Cu electrode as a substrate was shown, the electrode potential($E_{dep}$) at the $T_{on}$ of electrodeposition and the deposition potential(-600 mV) of the surface of the electrodeposited Co film after $T_{off}$ and when the pulse current was completed were shown. No significant change in the electrode potential value was observed when the pulse current was energized. However, in a range of number of pulses up to 5, there was a small fluctuation in the values of $E_{dep}$ and $E_{imm}$. In addition, in the Co-Ni alloy electrodeposition, the deposition potential(-280 mV) of the Cu electrode as the substrate exhibited the deposition potential(-615 mV) of the electrodeposited Co-Ni alloy after pulsed current application, the $E_{dep}$ of electrodeposition at the $T_{on}$ of each pulse and the $E_{imm}$ at the $T_{off}$ varied greatly each time the pulse current was applied. From 20 % to less than 90 % of the Co content of the thin film was continuously changed, and the value was constant at a pulse number of 100 or more. In any case, it was found that the shape of the substrate had a great influence.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.395-402
• /
• 2001

An induction thermal plasma system have been newly designed for advanced operation with a pulse modulated mode to control the plasma power in time domain and to create non-equilibrium effects such as fast quenching of the plasma to produce new functional materials in high rate. The system consists of MOSFET power supply with a maximum power of 50 kW with a frequency of 460 kHz, an induction plasma torch with a 10-turns coil of 80 mm diameter and 150 mm length and a vacuum chamber. The pulse modulated plasma was successfully generated at a plasma power of 30 kW and a high pressure of 100 kPa, with taking the on and off time as 10 ms, respectively. Measurements were carried out on the time-dependent spectral lines emitted from Ar species. The dynamic behavior of plasma temperature in a pulse cycle was estimated by the Boltzmann plot and the excitation temperature of Ar atom was found to be changed periodically from around 0.5 to 1.7 eV during the cycle. Two application regions of the induction thermal plasma newly generated were introduced to material processing with high rate synthesis based on non equilibrium effects, and to the finding of new arc quenching gases coming necessary for power circuit breaker, which is friendly with earth circumstance alternative to SF6 gas.