• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.105-111
• /
• 2005

This paper is concerned with the active vibration control of smart structure using actuator signal made of pulse width modulation. The pulse width modulation has been used in motor control, where the amount of energy fed into the motor is controlled by the pulse width instead of applied voltage. The advantage of using the pulse width modulation is that analog signal can be replaced by the digital signal so that we can reduce system costs and power consumption. The effect of pulse width modulation on the vibration response was investigated in this study and the valid transformation rule was found. Then, the pulse width modulation was realized using a microprocessor and electronic circuit. The active vibration suppression was carried out by combining the positive position feedback controller and the pulse width modulation. The experimental result shows that we can replace an expensive amplifier with a pulse width modulation system thus reducing the system cost. The result also shows that the active vibration control can be achieved by the pulse width modulation technique.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.353-356
• /
• 2011

전파를 수집하고 분석하는 신호수신시스템은 실 운용환경에서 검증되기 전에 정밀한 모의전파신호원을 이용한 정량적인 성능예측 및 실 환경과 유사한 모의전파환경에서 검증되어야한다. 신호수신 시스템은 전파의 주파수(Frequency), 펄스 변조(Pulse Modulation), 스캔 변조(Scan Modulation), 펄스 내 위상변조(Phase Modulation On Pulse), 펄스 내 주파수 변조(Frequency Modulation On Pulse) 등 다양한 신호특성에 대한 측정, 분석능력을 갖는다. 이러한 신호원들은 기본으로 실험실 환경에서 모의발생 되어야 하고 전파가 다수 존재하는 복잡한 전파환경 또한 모의되어야 한다. 본 논문에서는 효과적인 전파신호원의 모의발생, 운용시나리오에 따른 정밀고주파시험신호 모의방법에 관한 연구 결과를 서술한다.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.56-62
• /
• 2022

In this paper, the effect of pulse width modulation methods on thermal loadings and power losses of single-phase five-level NPC inverters for photovoltaic systems are analyzed. The pulse width modulation methods affect the power losses of the NPC inverters and thus lead to different thermal loadings of NPC inverters. To identify the reliability-critical power device with respect to thermal stress, the thermal loadings of I- and T-type NPC inverters are analyzed by applying the unipolar pulse modulation method. Then, the effect of the discontinuous pulse width modulation method on power losses and thermal loadings of power devices of I- and T-type NPC inverters are analyzed. Finally, the operation of NPC inverters applying the discontinuous pulse modulation method is confirmed by experiments. The results show that the discontinuous pulse modulation method is able to improve the reliability of NPC inverters by reducing thermal loadings of reliability-critical power devices and it is more effective for T-type NPC inverters than I-type NPC inverters.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.406-406
• /
• 2012

반도체 공정의 대부분은 plasma를 사용한 공정이 주를 이루고 있다. 이러한 공정에서 최근 선폭의 초 미세화가 진행되면서 pulse modulation plasma에 대한 관심을 가지게 되고 있다. Pulse modulation plasma는 RF 인가 시 일정 간격으로 on, off 시켜주게 된다. 이 때, chamber 내부에서 발생하는 plasma역시 on, off 되게 되는데 이러한 현상을 이용하면 plasma 내의 전자온도가 떨어져서 식각 공정 시 선택비의 개선을 기대할 수 있다. 실제 장비회사에서는 pulse를 이용하기 위한 장비개선 연구가 한창이다. 본 연구에서는 유도결합플라즈마 chamber에서 source와 bias에 RF pulse modulation plasma를 발생시켜 기존 CW (Continuous wave) 방전시킨 plasma의 밀도와 전자온도를 측정하여 차이를 비교, 분석 해보았다.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.94-101
• /
• 2012

In this paper, The Next Generation High Speed Railway inverter system based on IPMSM drives using Random Pulse Position Modulation is proposed to reduce electromagnetic noise. To verify the validity of study, the simulator for the proposed system is designed and impplemented. Simulation program is developed using Matlab/Simulink. The simulation results of the proposed system was compared with the system using conventional method. The results show that the voltage and current harmonics of the proposed Next Generation High Speed Railway Inverter system. significantly decrease and spread into wide band area by the proposed Random Pulse Position modulation technique based on Space Vector Modulation method.

• 제어로봇시스템학회논문지
• /
• 제6권11호
• /
• pp.981-986
• /
• 2000

A pulse amplitude modulation(PAM) controller is designed for the 3 axis attitude control of a sounding rocket. a certain number of fixed level of thrust are used for the pulse amplitude modulation and the nonlinearity of the controller is considered to examine the existence of the limit cycles and the stability analysis is carried out with the aid of Nyquist plot.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1480-1489
• /
• 2017

In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

• 전자공학회논문지SC
• /
• 제38권1호
• /
• pp.53-60
• /
• 2001

전력전자의 많은 응용분야에서 고주파 공진형 인버터가 이용되며, 이들 공진형 인버터의 출력 전력을 제어하기 위하여는 PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) 혹은 PWM(Pulse Width Modulation) 기법들이 이용된다. 그리고 이들 공진형 인버터는 변화하는 부하 상태에서도 신뢰성 있게 동작하기 위하여 출력추파수를 제어하여야 한다. 본 논문에서는 공진형 인버터의 PWM 제어의 일환으로써 새로운 스위칭 방법을 제안하였다. 제안한 방법에 의하면, 변화하는 공진 주파수하에서도 최적의 공진 주파수와 출력 기본파 역률 1을 달성할 수 있다. 제안한 PWM 스위칭 방법의 상세한 알고리즘 및 출력특성을 기술하였다. 그리고 실험 결과를 통하여 제안한 방법의 타당성을 확인하였다.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.351-354
• /
• 2008