• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.49-57
• /
• 2000

This study was carried out to investigate the effect of the type of base papers containing rice straw-BKP on the properties and printabilities of coated papers. Also, it was intended to evaluate the effect of coated paper prepared with anionic and amphoteric latex based coating color. The results obtained from this study were as follows. The fiber length of rice straw-BKP was observed much shorter than those of the wood pulps(Sw-BKP, Hw-BKP). This has effect on physical properties. Therefore, the results of measured physical properties were much lower than those of wood pulps. Also, physical properties tended to increase slightly with the increase of the mixing ratio of Sw-BKP. Opacity of the base paper containing rice straw-BKP, was higher than that of the wood pulps. As the mixing ratio of Sw-BKP increases the opacity tended to decrease. On the other hand, smoothness and roughness to rice straw-BKP were similar with Sw-BKP and its air permeability was lower than those of wood pulps. The optical properties of coated papers containing rice straw-BKP tended to be similar to those of other base papers. The ink receptivity of coated papers containg rice straw-BKP was higher than those of wood pulps and printing gloss was similar to wood pulps. The mixing ratio of Sw-BKP, the ink receptivity and printing gloss of rice straw-BKP were showed no difference irrespective the mixing ratio of Sw-BKP. Meannwhile, amphoteric latex improved the optical properties and printability of coated papers.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.191-198
• /
• 1999

Enzyme-aided bleaching of softwood and hardwood kraft pulps by a xylanase preparation from an alkalophilic fungus Cephalospotium sp. RYM-202 was studied. Maximal solubilization of Pulp xylan was obtained at 5$0^{\circ}C$ in both kraft pulps. The optimum pH of the enzyme for the hydrolysis of pulp xylan was 8.0 and more than 90% of the maximal activity was detected at 9.0. The positive effects of xylanase pretreatment on bleachability of softwood and hardwood kraft pulps were observed. The kappa number of softwood and hardwood kraft pulps was decreased by 3.7 and 2.0 units, respectively. The pulp fibre integrity was not significantly affected by xylanase pretreatment when the physical properties of handsheets made from xylanase-treated pulps were compared with those of handsheets from untreated pulps. These results indicate that the alkaline xylanase of Cephalospotium sp. RYM-202 is well suitable for application in enzymatic prebleaching of softwood and hardwood kraft pulps under the alkaline conditions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.43-50
• /
• 2014

The cultivation of agricultural crops results in the generation of agricultural byproducts. Researchers have reported that these materials can be useful in a variety of applications. However, over 50% of them are currently discarded because of the lack of specific technologies in industrial applications. Therefore, effective and specific applications must be developed in order to manufacture high-quality materials using discarded lignocellulosic resources. In this study, we determined the possibility of using kraft pulp from major agricultural byproducts as a raw material for the manufacture of paperboard. Rice husks, peanut husks, and garlic stems were obtained and used to prepare many kinds of kraft pulps by controlling the active alkali, sulfidity, reaction time, and liquor ratio. After the production of these kraft pulps, handsheets were manufactured by mixing them with KOCC. After preconditioning, the physical properties and strengths of the handsheets were measured according to the TAPPI test methods. The shapes, lengths, and widths of the pulp fibers varied according to the type of agricultural byproduct and the kraft pulping conditions. Rice husk and garlic stem pulps manufactured under mild pulping conditions resulted in handsheets of higher bulk than other pulps. Garlic stem pulps manufactured under mild pulping conditions were stronger than rice husk pulps and peanut husk pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.36-45
• /
• 1997

Newly bleaching sequence using oxygen, ozone and hydrogen peroxide has introduced to avoid pollution hazards from chlorinated organic compounds, because chlorine dioxide substitution bleaching was produced a little chlorinated organic substance. Oxygen-type chemicals replaced for chlorine has attracted much research attention. Bleachability of ozone was improved at low temperature and high pulp consistency. In third bleaching followed OZ bleaching, addition of O2 and NaBH4 in alkali extraction was effective than only alkali extraction. Bleachability of pulps in ozone bleaching(Z) was improved at higher consistency and lower temperature The addition O2 and NaBH4 in alkali extraction after OZ bleaching sequence improved brightness, when compared to those obtained by only alkaline extraction. Pulps bleached by ECF bleaching sequences such as OZEoD and OZEopD was obtained by 90% ISO brightness. The brightness of pulp bleached by TCF sequences with the ozone dosage of 1.6% was approached to target brightness (88~90%ISO). Pulps bleached Z stage combined bleaching sequence was reduced the viscosity to a little greater extent. However, physical properties of pulps was not great different compared to those bleached by conventional bleaching sequences. A pollution index of bleaching effluente by ozone combined bleaching sequences was lower than by conventional bleaching sequence, but somewhat higher than multistage bleaching sequences combined C/D stage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.3
• /
• pp.65-74
• /
• 2000

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulps(alkaline sulfite-Na2S2O4 pulp) were bleached with the various kinds of bleaching agents. And physical properties of bleached pulps were tested. The results of this study were as follows; 1, The proper conditions of chlorine sequence were determined to be 4% concentration of chlorine 25$^{\circ}C$ of reaction temperature and 50 minutes of reaction time. 2. For calcium hypochlorite sequence the proper conditions of chemical concentration reac-tion temperature and reaction time were 3% 25$^{\circ}C$ and 20 minutes respectively. 3. For chlorine dioxide sequence the proper conditions were 1% concentration of chlorine dioxide 70$^{\circ}C$ of reaction temperature and 2hr. of reaction time. 4. The proper conditions of hydrogen peroxide sequence were 1.5% concentration of hydro-gen peroxide 70$^{\circ}C$ of reaction temperature and 1hr. of reaction time respectively. 5. When the rice-straw chemical pulp were bleached with four kinds of bleaching agents methioned above in the proper conditions respectively brightnesses were the order of chlorine dioxide calcium hypochlorite, chlorine, hydrogen peroxide. And strengthes of pulps bleached with chlorine dioxide and hydrogen peroxide were higher than those of pulps bleached with other bleaching agents.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.70-78
• /
• 1988

To separate and utilize the main components of hardwood (Quercus mongolica) by organosov pulping (ester pulping), chips were cooked at various conditions such as; the solvent ratio (acetic acid: ethylacetate: water, 50:25:25; 33:33:34; 25:50:25), maximum temperature (165, 170, $175^{\circ}C$), and cooking times (2, 2.5, 3 hr). The pulps were bleached by the sequences of CEDED, C/DEDED, PEDED. Lignin, sugars, and acetic acid were separated from black liquor and washing liquors. 1. The selective delignification at optimal pulp yield (43-45%) was obtained by cooking at acetic acid: ethylace tate: water ratio of 33:34:34 for 3 hr at $170^{\circ}C$. But in this case, kappa no. of the pulp was not reduced under 60 points. 2. Kappa no. of the pulp could be dropped by an acetone wash to remove reprecipitated lignin a t cooked pulp. 3. The unbleached pulps had a brightness of 45-50%, whereas the bleached pulps gave at 88-93% brightness. Tensile, burst, and tear strengths of the bleached pulps were lower than those of kraft pulp, especially in tear strength. The pulps which were bleached with CEDED sequence were higher in strengths than another bleaching sequences. 4. Lignin of 90-95%(lignin base on wood)was separated from black liquor and washing liquors, while the purified sugars and recovery of acetic acid were a low. An organic phase composed of acetic acid, ethylacetate, and water was separated to a two-phase system by proper adjustment of the solvent ratios.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.119-124
• /
• 1987

Combined cryoprotectants (C.C.) were formulated to depress freezing points of strawberry pulp and orange juice concentrate to ${-15}^{\circ}C$, and quality changes in fruit pulps during storage ai ${-15}^{\circ}C$ in the liquid state were investigated. C.C. suitable for strawberry pulp consisted of sucrose (2.5%, w/w), glucose (12.7%), fructose (12.7%), glycerol (1%), propylene glycol (1%) and ascorbic acid (0.1%), and that for orange juice concentrate containing 48% solids glucose (5%), fructose (5%), glycerol (4%) and citric acid (1%). When quality of fruit pulps was compared among control and those with C.C., quality of fruit pulps stored with added C.C. was at least as good as control, except treatment B which had significantly lower overall preference. Strawberry jam prepared from pulp stored for 4 monthes did not show any significant quality differences among control and treated samples. The results of this study indicated that fruit pulps could be stored with added C.C. in the liquid state at the frozen storage temperature, while maintaining qualities at least as good as the conventionally frozen stored products.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.7-17
• /
• 1982

The purpose of this study was to investigate the fine structural modifications of fibroblasts in the coronal region of inflamed human pulps from carious teeth. Six untreated human teeth with large carious lesions and two normal teeth as control were selected from male and female patients between the ages of 20 and 39. The teeth were divided into 4 groups by light microscopic findings: the normal control group, the chronic inflammatory cell-appeared group, the acute and chronic inflammatory cell-appeared group, and the total necrosis group. All tissues were fixed in 2.5% glutaraldehyde in 0.1M sodium cacodylate buffer at pH 7.4 and 1% osmic acid in same buffer. They were embedded in Epon 812. The ultrathin sections were stained conventionally and examined with a AEI Corynth 500 electron microscope. The results were as follows; 1. The fibroblasts of the normal pulps were almost in a quiescent state. 2. The active and the quiescent fibroblasts were found in the pulps of the chronic inflammatory cell-appeared group. Lymphocytes and plasma cells were also seen scattered among these fibroblasts. 3. In the pulps of the acute and chronic inflammatory cell-appeared group, active, degenerative and necrotic fibroblasts were found in the PMN appeared area. And all the fibroblasts in the fibrosis area were active. In the area of chronic inflammatory cellular infiltration, almost all the fibroblasts were active, but seldom were quiescent fibroblasts observed. Some fibroblasts in the pulps of two teeth had large vacuoles that contained banded collagen fibrils. The phagosomes had small beaded vesicles or large lysosome-like varicosity. In two of the teeth, microorganisms were present and two morphological shapes were identified, a rod and a coccus. 4. Vacuolar, vesicular, lamellar, fibrous and myelin structures were observed in the pulp of the total necrosis group, and cocci were also seen.

• Restorative Dentistry and Endodontics
• /
• v.3 no.1
• /
• pp.17-21
• /
• 1977

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under calcium hydroxide and formocresol were studied histologically. The class I and V cavities were prepared on the teeth and the pulp was amputated. Calcium hydroxide and formocresol were placed over the amputated tissue and the cavities were sealed with zine oxide eugenol cement and zinc phosphate cement. Animals. were sacrifice after 1, 2, and 3 weeks following the operation. The teeth were decalcfied, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Healing of the pulp at the amputation site did not occur in the pulps treated with formocresol. 2. At one week, a thin layer of darker staining tissues just below the necrotic zone was presented in the pulps treated with formocresol. In this stage the tissues beneath the darker staining layer were normal. 3. At two weeks, the cells of the palest staining layer were showed indistinct nucleus which suggested the karyolysis and the karyorrhexis in the pulps treated with formocoresol. As reached to the middle third of the pulp, the odontoblasts were scarcely evident or missed in this stage. 4. At three weeks, the necrotic zone was reached to the middle third of the pulp canal. The cells beneath the zone showed massive infiltration of inflammatory cells in the pulps treated with formocresol. 5. Dentin bridge in the control group was deposited below the necrotic zone from the two. weeks later. 6. Normal tissues were observed ill the apical third of all. the dental pulps in all case of calcium hydroxide and formocresol.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2004

This study was carried out to investigate the sheet properties of Indian mallow Hanji, made by different pulping methods, such as alkali and sulfomethylated pulpings, and different stock compositions, various mixing ratios of bast fiber and woody core fibers. Indian mallow hanjis made from the sulfomethylated pulps had higher brightness and sheet strength than the alkali pulps. It was found that the brightness of sulfomethylated pulp was enough high without an extra-bleaching. In the mechanical properties of Indian mallow hanjis mixed with bast fiber and woody core stalk pulps, the sheet strength were decreased as wood core pulps contents were increased. The sheet formation were increased as the increase of woody core pulps contents, while the sheet strength decreased. Although the sulfomethylated pulping resulted in higher pulp yield, no morphological differences of fiber surfaces were shown as compared to the different pulping methods.