• 감성과학
• /
• 제21권2호
• /
• pp.73-88
• /
• 2018

본 연구는 손과 가까운 시각 정보의 처리적 특성이 과제전환에 미치는 영향을 살펴보기 위해 수행되었다. 최근 연구들은 손과 가깝게 제시된 정보에 대한 인지통제가 향상됨을 보고하고 있다. 이러한 인지통제 향상효과를 손 근접성과 주의의 관계를 통해 규명하고자 두 번의 실험을 실시하였다. 그 결과 과제전환 수행에서 단서와 목표자극의 감각양상에 따라 손 근접성의 효과가 달라짐을 관찰할 수 있었다. 첫 번째 실험에서 손에 근접한 자극에 대한 전환비용의 감소가 관찰되었다. 선행 연구들에서 전환비용의 감소원인으로 지목되었던 특징결합 문제를 제외시켰을 경우에도 동일한 결과가 관찰되었다. 즉, 손 근접성이 전환비용을 감소시켰음을 검증할 수 있었다. 두 번째 실험에서는 손 근접성과 감각양상의 상호작용이 전환비용에 미치는 영향을 살펴보기 위해 수행되었다. 과제전환에서 목표자극은 시각으로 단서는 시각 또는 청각으로 제시하였고, 단서의 준비성 효과를 관찰하기 위해 단서-목표자극 간격을 조변하였다. 연구 결과 손에 근접한 시각 단서는 과제 준비 시간을 단축시켜 전환비용을 감소시켰으나, 청각 단서의 경우 손에 근접할 때 오히려 과제 준비 시간이 더 오래 걸렸다. 시각 단서의 결과는 손에 근접한 시각 정보에 대한 신속한 주의정향으로 인한 이득으로 설명될 수 있다. 반면에 청각 단서에서 나타난 손실은 청각 단서와 시각 자극 간의 감각 간 전환이 손 근접성의 주의 범위 고정 효과로 인해 방해된 결과로 해석될 수 있다. 마지막으로 손 근접성의 주의효과로 인해 달라지는 전환비용에 대해 논의하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.33-36
• /
• 2016

Suppression of the superconducting transition temperature ($T_c$) of NbN thin films in superconductor/ferromagnet multilayers has been investigated. Both superconducting NbN and ferromagnetic FeN layers were deposited on thermally oxidized Si substrate at room temperature by using reactive magnetron sputtering in an $Ar-N_2$ gas mixture. The thickness of FeN films was fixed at 20 nm, while the thickness of NbN films was varied from 3 nm to 90 nm. $T_c$ suppression was clearly observed in NbN layers up to 70 nm thickness when NbN layer was in proximity with FeN layer. For a given thickness of NbN layer, the magnitude of $T_c$ suppression was increased in the order of Si/FeN/NbN, Si/NbN/FeN, and Si/FeN/NbN/FeN structure. This result can be used to design a spin switch whose operation is based on the proximity effect between superconducting and ferromagnetic layers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.237-240
• /
• 2002

We have studied a RF energy transformation. In this paper, we introduced proximity sensor using RF energy transformation. We used 125kHz RF signal as carrier frequency and BPSK circuit, PNP proximity sensor and designed circuit to transmit to the reader through the antenna with data which sensor had acquired. Micro-controller, oscillator, power amp, FSK Modulation module are included in the circuit. Max 323 chip is applied to analog switch and used to HYP-30R10NA sensor chip.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.86-91
• /
• 2009

입력부 근방의 정전용량 변화를 감지하여 동작하는 간접접촉형 실내조명 스위치를 설계하고 제작했다. 그리고 간접접촉 스위치의 입력 전극에 설치된 커패시터의 정전용량을 변화시켜가며 간접접촉을 감지하는 입력 전극을 절연하는 물질의 두께 및 종류 변화에 따른 동작 감도를 측정한 결과를 표와 그래프로 나타냈다. 절연 물질은 유리, 아크릴, 그리고 나무(MDF)였는데, 이들의 유전율은 상당히 다르지만 스위치의 동작 감도는 유전율의 차이만큼 크지 않은 것이 확인되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1063-1070
• /
• 2005

Number of subway train units that Seoul Metropolitan Subway Corporation as at September 2005 is 1.944 on 4 routes from 60 units at the time of commencement of operation, having grown exponentially. Along with increase in the number of passengers the role of subway as safer and expedient means of transportation is now being required. Furthermore, the Corporation has been researching on means of improving the safety and reliability of subway entry/exit doors which has become an essential task and directly effect the safety of the passengers. In this Study, has developed sensory control system for the entry/exit door of the subway train using non-contact proximity sensor as a part of review of and measures against various issues of entry/exit door of the subway trains currently under operation. In addition, this sensor system was verified through test production and tests. If this technology becomes commercialized and practically utilized in the future, it would be able to make definite contribution to the safer transportation of passengers.

• Journal of Biosystems Engineering
• /
• 제19권2호
• /
• pp.99-111
• /
• 1994

Automatic control system using microcomputer that have been studied in greenhouse, however, it was very difficult operation with success due to handicap for a various conditions and cultivated plants. This study was performed in order to develop of the basic program and hardware system for automatic control in greenhouse, such as automatic supplying of water, liquefied fertilizer solution and chemical solution. The results were summarized as follows. 1. The program for soil moisture control used by the switch type tensiometer was well operated. 2. The proximity switch was applied as well to water level control but it was very expensive, so low-priced sensor has to be developed. 3. The water meter was not excellent for mixing control of liquefied fertilizer, chemical and water, so water meter for only agricalture has to be developed. 4. Interface system for this study was suited to the developed controller. 5. Automatic control system to supply for water, liquefied fertilizer and chemical solution that was well operated as a fundamental study for product of controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.71-74
• /
• 1992

This paper describes the automation of the surface grinder for a grinding wheel by application of programmable logic controller(PLC) with a position sensor, and a limit switch. The control system is designed to provide feeding a workpiece on the turn table and pressing it by the upper disk automatically. In this development the automation of checking the thickness of a grinding wheel is most important. In order to measure the relative displacement, the proximity sensors were employed and the sensitivities of the sensors were investicated and discussed the superiority. It has been shown by model experiment that the automation system of the surface grinder is performed satisfactory.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5534-5540
• /
• 2015

철도 신호제어시스템에서 열차의 위치 및 점유 유무를 검지하기 위하여 궤도회로 이외에 axle counter적용 사례가 증가하고 있는 추세이다. 이에 본 연구에서는 열차검지 및 차축계수의 신뢰성을 높이기 위해 axle counter의 센서 방식을 지자기 센서 방식과 근접센서 방식을 비교하였으며, 그에 따른 차이점과 결과를 제시하였다. 또한, 정확한 차축검지를 위한 센서부의 취부조건 등을 고려한 설치에 대해 현장 경험을 기반으로 적용된 결과를 제시한다. 본 연구에서는 차축검지의 신뢰성 향상을 위해 센서의 위상차를 판단할 수 있도록 설계 변경한 결과 차축검지 기능뿐만 아니라 다양한 기능까지(열차의 방향검지, 열차속도검지 등) 수행할 수 있는 확장성을 확보하였다. 또한 열차의 종별, 무게 등의 특성에 종속되지 않았으며, 자체적으로 제작한 차축검지를 위한 모의차축 이송장치와 Test Bed를 구축하여 Lab. 테스트를 수행한 결과 350km/h의 속도에서도 차축 검지의 누락이 발생하지 않았음을 확인하였다. 이를 통해 열차의 검지뿐만 아니라 통과하는 열차의 속도와 편성 수, 선로전환기 통과 시 철사쇄정 조건 그리고 건널목 장치에도 적용할 수 있는 기반을 마련하였으며, 향후 철도 신호제어 시스템 전반에 확대 적용하게 되면 열차안전운행에 많은 기여를 할 것으로 판단된다.

• Journal of Photoscience
• /
• 제11권2호
• /
• pp.71-74
• /
• 2004

The macrocycle L exhibited a switch on-off behavior through the fluorescent responses by aromatic imine molecule 1 (X=H) / trifluoroacetic acid (TFA). In the 'switch on' state, it was supposed that the aromatic imine molecule 1 is in the cavity of macrocycle L and a photoinduced electron transfer (PET) from the nitrogen of azacrown part to the anthryl group is inhibited by the interaction between the aromatic imine molecule 1 and the azacrown part of macrocycle L. In the 'switch off' state, it was supposed that the protonated imine molecule 1 is induced by the continuous addition of TFA and a repulsion between the protonated azacrown part and the protonated imine molecule 1 is occurred. It was considered that this process induces the intermolecular PET from the protonated imine molecule 1 to the anthryl group of macrocycle L because of a proximity effect between the anthryl group and the protonated imine molecule 1. From the investigation of the transient emission decay curve, the macrocycle L showed three components (3.45 ns (79.72%), 0.61 ns (14.53%), and 0.10 ns (5.75%). When the imine molecule 1 was added in the macrocycle L as molar ratio=1:1, the first main component showed a little longer lifetime as 3.68 ns (82.75%) although the other two components were similar as 0.64 ns (14.28%) and 0.08 ns (2.96%). On the contrary, when the imine molecule 3 (X=C1) was added in the macrocycle L as molar ratio=l:1, all the three components were decreased such as 3.27 ns (69.83%), 0.44 ns (13.24%), and 0.06 ns (16.93%). The fluorescent pH titration of macrocycle L was carried out from pH=3 to pH=9. The macrocycle L and C $U^{2+}$- macrocycle L complex were intersected at about pH=5, while the E $u^{3+}$ -macrocycle L complex was intersected at about pH=5.5. In addtion, we investigated the fluorescence change of macrocycle L as a function of the substituent constant ($\sigma$$_{p}$$^{o}$) showing in the para-substituent with electron withdrawing groups (X=F, Cl) and electron donating groups (X=C $H_3$, OC $H_3$, N(C $H_3$)$_2$), respectively, as well as non-substituent (X=H).).ctively, as well as non-substituent (X=H).