• KOMUNHWA
• /
• no.37
• /
• pp.3-40
• /
• 1990

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.35-72
• /
• 2007

Since three has never been any incidence of having investigated kilns for firing soft stoneware in the proto-three kingdoms period so far, how they structured by reviewing historic literature and material was preconsidered in this study. It is presumed that after both Gimhae Daeseongdong-type and Sacheon Bonggyeri-type kilns for firing earthenware coexist early, through an internal alteration process which is mutually complex and momentous, the floor of plastic room has been flattened or slanted and expanded little by little into the closed-kiln structure. It seems that the structure of kilns for firing soft stoneware was a horizontal combustion type(水平燃燒式) and its plane shape was close to being rectangular in shape unlike that of kilns for firing stoneware found in Honam and Hoseo province in the period of (proto-) three kingdoms. On the other hand, it is likely that the horizontal combustion type structure of kilns for firing stoneware excavated in Samyong-ri, Jincheon preceded the vertical combustion type(垂直燃燒式)that of kilns for firing stonewere found in Sansu-ri. In addition, the term, monumeut for firing earthenware must be changed to kiln for firing earthenware and the terms of Pyeungyo(平窯) and Dyengyo(登窯) can be applied to kilns for firing tiles. Thus, it does not seem likely that the absolute equality that Wajil earthenware(soft stoneware) pottery is Pyeungyo and stoneware pottery is Dyeungyo is applied in all cases.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.371-376
• /
• 2010

The great jar estimated in Proto-Three Kingdoms period was found at the site from Pyeongtaek Daechuri and the bonding traces from pieces destroyed when they were excavated are observed. Therefore this study would figure out the components of bonding material used in great jars by optical microscope, FT-IR, py-GC/MS and the kind of textile attaching to great jar by transmitted light microscope. As a result of optical microscope for the cross-section, black material is uniformly applied between a piece of jar and the part of bonding and the textile line are observed. Black bonding material is resulted in korean rhus lacquer by FT-IR and py-GC/MS and the kind of textile is identified as hemp by transmitted light microscope. Materials for repairing archaeological objects are hardly known causing little information, but this study proves that the bonding material had used lacquer for great jars before Proto-Three Kingdoms period. Therefore if ancient bonding materials are systematically analysed in the further studies, it would be significant help for studying bonding and restoration materials of ancient objects.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.171-185
• /
• 2013

The purpose of this study were to interpret making characteristics and clay sources for Proto-Three Kingdoms period potteries which were excavated from Bakjimeure site in Tangjeong, Asan, Korea, on the basis of shape types. The pottery samples of the studied included deep bowl pottery, cylinder shaped pottery, duck shaped pottery and rounded based jar with short neck. And the last jar was dominant among them. This is supported in nearby Yongduri Jinter site, Galmaeri site and Baekseokdong site. They vary in terms of color of clay, absorption ratio and mineral classification. Based on the fact that their absorption ratio range was 4.50 to 25.19% and firing temperature range was 850 to $1,150^{\circ}C$, they were thought to be widely used. The equivalence of cylinder shaped pottery, duck shaped pottery and deep bowl pottery was high in terms of material characteristics and their firing temperature range was 850 to $950^{\circ}C$. However, the deep bowl pottery, compared to other pottery shapes, contained great amount of coarse grained quartz and feldspar, and was different from others in terms of function. For soil sample collected from relative plains (area 3) in the southernmost part of the site, their mineralogical and geochemical characteristics were the most similar to those of the potteries excavated from the Bakjimeure site and even most of the potteries collected from different sites.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.77-89
• /
• 2021

In this study, materials and color formation techniques were assessed for black potteries excavated from the Janghyeon-dong, Jungsan-dong and Gyodong-ri sites during the Proto-Three Kingdoms period in Ulsan, Korea. Although the black potteries were black superficially, the inner cores were either black or reddish yellow. Microscopy analysis identified that body clay was used for reddish iron oxide rich soils with quartz, alkali feldspar and mica, along with grains of myrmechite texture. Additionally, as marginal differences exist in the contents of SiO₂, Fe₂O₃ and CaO, the composition of the host rock and clay distributed around the sites was affected. Thus, we can deduce that pottery was made by soiling at a short distance. Raman spectroscopy results revealed that the black layer of the black pottery was used as amorphous combustion carbon. In addition, as a transparent layer of brown lacquer was observed on the substrate that was in contact with the surface layer, the black layer of the pottery induced black color development by a combination of combustion carbon and lacquer. Based on the mineral composition and microtexture of the body clay, the firing temperature of the potteries seemed to range from 750 to 850℃, whereas the lacquer layer was pyrolyzed at 468℃ by thermal analysis. Therefore, a combined layer of combustion carbon and lacquer, which formed the black color, was painted after the body clay was fired.

• KOMUNHWA
• /
• no.70
• /
• pp.63-88
• /
• 2007

The purpose of this writing is to examine the places and instruments of the dissection for deformed animal carcasses excavated in shellfish stacks of the period of the Proto-Three Kingdoms(삼한) and the Three Kingdoms(삼국). The remains were chosen, which had been excavated and finished in the analysis of the animal carcasses, and the main objects are all shells and deer, especially among Mammalia. As the result, the dissection of shells was not taken place in the habitats of the animals, but inside or around of the residence of the people. For deer, too, it was done in the public place or specific area around and inside the residence. As concerns the method of dissection for shells, for Pelecypoda(부족류), represented by Meretrix lusoria(백합), the inner meat was taken out by wrenching the shell with a kind of small knives, or by boiling, and sometimes by cracking the middle of the shell in the case of big Meretrix lusoria and Dosinorbis japonicus(떡조개). For Rapana venosa(피뿔고둥), representative of Gastropoad(배발류), the people broke the top or some parts of the body to get the inner meat or used some kind of needles and stylus to pick the inner meat out after boiling. Abalones‘ meat was attached firmly to the shell, so very sharp and proper metal instruments were used to take the meat out Relatively small-sized Reishia clavigera(대수리),Top shell(밤고둥) meats were taken out by breaking the top parts after boiling, then sucking the meats, or by picking them out by using needles and stylus in the original shape. In the case of large Mammalia like deer, in the full consideration of the point that deer itself are used in various ways, they were dissected in the order of skinning, taking out the internal organs, cutting front and rear legs, separating joint parts and meats, extracting bone-marrow by 철정, 철부, ironed hand knife in very delicate ways. It seems that skinning, and front and rear legs' cutting were taken place in the place around the residence, on the other hand joint parts' separating and bone-marrow extracting in the residence. The tools for the dissection were confirmed to be hand-knife, honed ax, hammer stone, bondstone, needles and stylus, and some other sharp instrument. They were used properly according to objects.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.99-111
• /
• 2012

The purpose of this study is to identify the change of geographical (or geomorphological) location environment of the dwelling site and its cause in Daejon Basin during transition from the Bronze Age to the Proto Three Kingdoms Period. In order to achieve this goal, it was divided into (1) 'comparison of the total number of dwelling sites of a group of remains (or high-density dwelling remains)' and (2) 'comparison of the total number of dwelling sites in certain remains including locations of dwelling of two periods' and location environment was compared to each other in aspects of altitude, gradient, 'distance from the river of water available for use' and 'the difference between the highest altitude and lowest altitude of river bed of water available for use' based on change of period. The results were as follows: 1. looking at a change of individual factors, the altitude was elevated and the gradient was increased. The distance from the river of water available for use was decreased or increased in case of 'small scale river' and it was very little difference or increased in case of 'medium scale river'. The difference between the highest altitude and lowest altitude of river bed of water available for use was increased in case of 'small scale river' and it was increased or decreased in case of 'medium scale river'. If comparing the individual factors to each other, the increase and decrease of altitude, gradient and the difference between the highest altitude and lowest altitude of river bed of water available for use have the similar pattern. Especially, it was shown that the increase of gradient affected the increase of altitude and the difference between the highest altitude and lowest altitude of river bed of water available for use. In addition, it was shown that the increase and decrease of distance from the river of water available for use had the different pattern from those of altitude, gradient and 'the difference between the highest altitude and lowest altitude of river bed of water available for use'. 3. With above results, it was thought that combination of micro landform characteristics (eg. Characteristics of gradient) of low hills distributed within Daejeon Basin and rich aquatic environment surrounding the low hills affected the selection of location of dwelling sites at the time. Especially, it was shown that 'gradient and distance from the river of water available for use' were relatively more important factors for the inhabitants at the time to select the location of dwelling sites compared to 'altitude and difference between the highest altitude and lowest altitude of river bed of water available for use' upon selecting the location of dwelling.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.367-378
• /
• 2013

Microstructures and nonmetallic inclusions of five forged iron axes and one cast iron axe were analyzed. The axes were excavated from the Proto-Three Kingdom Period site located in Yangchon, Gimpo. The forging objects were made of almost pure iron and low carbon steel, and only one among five were quenched after its figuration. Malleable cast iron structures showing on the casting suggest that the decarbonized casting method were applied. According to the results of nonmetallic inclusion analysis, the axes were produced by hammering the iron bloom which was attained with low-temperature -solid-reduction-method. Showing higher Fe content over $SiO_2$, it is assumed that the re-collecting rate of Fe was low because of the insufficient forging temperature and the impurities were included during the smelting process. It is assumed that the lime was used as a preparation because of detecting high Ca contents.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.437-444
• /
• 2013

We studied for the chemical characterizations of the charred residues obtained from the ancient potteries in the Proto-Three Kingdom period from archaeological sites in Joong-do, Chuncheon. Organic components of the charred residues were extracted and analysed using mass spectrometry and infrared spectroscopy. Lipid profiles from these samples were not identified in gas chromatography-mass spectrometry. Bulk stable isotope analyses of charred residues was used to infer an average values of the foods prepared. The average carbon isotope values (${\delta}^{13}C$) of the residues are $-14.7{\pm}2.8$‰ (ranging from -8.7‰ to -18.4‰, n=9), and nitrogen isotope values (${\delta}^{15}N$) are $6.2{\pm}1.1$‰ (ranging from -4.4‰ to -7.6‰, n=9). This is the first approach to analyse charred residues using stable isotopic method in Korea. Charred food residues on the interior surface of archaeological pottery can provide valuable information about pottery use and dietary habits of its population.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.168-183
• /
• 2020

Efforts had been made to eliminate the brittleness unique to cast ironware from 5 BC up until the time that cast ironware became widely used. One of the techniques used to this end was to produce the cast ironware in one kiln and then anneal it in another kiln. This technique condensed or removed the carbon in the structure to eliminate the brittleness of cast ironware and enable forging. To clarify the nature of this technique, this study examined cast ironware made of malleable cast iron, which manifests the characteristics of the annealing technique for cast ironware excavated on the Korean peninsula, based on current steelmaking technology and research results from China and Japan. Results confirmed that all cast ironware made of malleable cast iron had been imported into Korea until the Proto-Three Kingdoms Period. Also, since the Chiljido (Seven-Branched Sword), which is housed at the Ishigami Shrine in Japan, appears to have been produced in the Korean peninsula, it is determined that Baekje in the 4^th century must have possessed such an annealing technique. At that time, however, iron was produced mainly with an iron bloom, and a large amount of forged iron was produced with a steel bloom smelted from an iron bloom. In addition, most of the cast ironware that was used previously, except for cast iron hoes, had been replaced by forged ironware. In other words, this annealing technique was not used frequently until the Three Kingdoms Period. However, it spread broadly during the Unified Silla Period in so much as it was identified in the Jangan-ri remains, which represented the regional hub of iron production and distribution.