• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.251-256
• /
• 2004

Exposure of zinc samples in simulated acid rain solution (SARS) was investigated under a periodic wet-dry conditions using an AC impedance technique. The periodic wet and dry exposure consisted of the immersion of zinc samples in SARS for one hour followed by exposure to 7 hours drying at 60% RH. Phases of the corrosion products were indentified by X-ray diffraction (XRD). The influence of relative humdiity (RH), temperature, and surface inclination on the atmospheric corrosion of zinc is described. The reciprocal of polarization resistance (1/Rp) decreases rapidly during the initial stages then slowly and eventually attains a steady state as exposure time progresses. The average of reciprocal of polarization resistance per cycle, (ARPR) was calculated and found to decrease as number of exposure cycle increases. An increase of temperature enhances the corrsion rate of zinc. The values of ARPR, of a sample inclined at 30 o are lower than those for a sample oriented horizontally. The experiment result shows a pronounced dependence of reciprocal of polarization resistance on RH. Exposure in the presence of carbonate anions gives rise to more protective corrosion products than in nitrate anion solution. The corrosion mechanism during the initial stages of atmospheric zinc corrosion under wet-dry cyclic conditions is suggested.

• Corrosion Science and Technology
• /
• 제18권5호
• /
• pp.155-167
• /
• 2019

In this study, two novel Schiff base compounds including (3-(4-Chlorophenyl isoxazole-5-yl) methanol and (3-(2,4 dichlorophenol isoxazole-5-yl) methanol as corrosion inhibitors for mild steel in 1 M hydrochloric acid solution were investigated by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and density functional theory (DFT) computations. The results showed that the corrosion inhibition efficiency (IE) is remarkably enhanced with the growing concentration of the Schiff base inhibitors. The results from Tafel polarization and EIS methods showed that IE decreases with gradual increments of temperature. This process can be attributed to the displacement of the adsorption/desorption balance and hence to the diminution of the level of a surface coating. Also, the adsorption of two inhibitors over mild steel followed the Langmuir adsorption isotherm. Too, the results of the scanning electron microscope (SEM) images showed that the Schiff base inhibitors form an excellent protective film over mild steel and verified the results by electrochemical techniques. Additionally, the results from the experimental and those from DFT computations are in excellent accordance.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.260-275
• /
• 2018

The corrosion inhibition of cast iron in 1 M HCl by Phenanthroline (Phen) was investigated using potentiodynamic polarization (PDP) curves, electrochemical impedance spectroscopy (EIS), surface analysis and theoretical calculations. It is found that Phen exhibits high inhibition activity towards the corrosive action of HCl and its adsorption obeys the Langmuir adsorption isotherm model. The results showed that inhibition efficiency increases with Phen concentration up to a maximum value of 96% at 1.4 mM, and decreases slightly with the increase in temperature. The free adsorption energy value indicates that Phen adsorbs on cast iron surface in 1 M HCl via a simultaneous physisorption and chemisorption mechanism. Scanning electron microscopy (SEM) micrographs, atomic force microscopy (AFM) and FTIR analysis confirmed the formation of a protective film on cast iron surface, resulting in the improvement of its corrosion resistance in the studied aggressive solution. Quantum chemical calculations at the DFT level were achieved to correlate electronic structure parameters of Phen molecules with their adsorption mode.

• Corrosion Science and Technology
• /
• 제23권1호
• /
• pp.20-32
• /
• 2024

Metal corrosion in acidic environments is a major issue in various industrial applications. This study evaluates the 4-piperonylideneaminoantipyrine (PPDAA) corrosion inhibition efficiency for mild steel in a hydrochloric acid (HCl) solution. The weight loss method was used to determine the corrosion inhibition efficiency at different concentrations and immersion time periods. Results revealed that the highest inhibition efficiency (94.3%) was achieved at 5 mM concentration after 5 hours of immersion time. To inspect the surface morphology of the inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl. Density functional theory (DFT) calculations were performed to investigate the molecular structure and electronic properties of the inhibitor molecule to understand the corrosion inhibition mechanism. Theoretical results showed that the inhibitor molecule can adsorb onto the mild steel surface through its nitrogen and oxygen atoms, forming a protective layer that prevents HCl corrosive attack. These findings highlight the potential of PPDAA as an effective corrosion inhibitor for mild steel in HCl solution. Moreover, combining experimental and theoretical approaches provides insights into the mechanism of corrosion inhibition, which is essential for developing effective strategies to prevent metal corrosion in acidic environments.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.184-193
• /
• 2021

This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm² of 300 Hz AC in 0.1 M NaOH + 0.4 M Na₂SiO₃ solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg₁₇Al₁₂ in AZ91 Mg alloy was dissolved and a protective thin film of MgF₂ was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.

• Corrosion Science and Technology
• /
• 제4권3호
• /
• pp.75-80
• /
• 2005

This work dealt with the evaluation of galvanic corrosion rate in a corrosion cell having annular gap of 0.5 mm between carbon steel 1018 and alloy 600 as a function of temperature and boron concentration. Temperature and boron concentration were ranged from 110 to 300 $^{\circ}C$ and 2000~10000 ppm, respectively. After the operating temperature of the corrosion cell where the electrolyte was injected was attained at setting temperature, galvanic coupling was made and at the same time galvanic current was measured. The galvanic corrosion rate decreased with time, which was described by corrosion product such as protective film as well as boric acid deposit formed on the carbon steel with time. From the galvanic current obtained as a function of temperature and boron concentration, it was found that the galvanic corrosion rate decreased with temperaturewhilethe corrosionrate increasedwith boronconcentration. The experimental resultsobtained from galvanic corrosion measurement were explained by adhesive property of corrosion product such as protective film, boric acid deposit formed on the carbon steel wall and dehydration of boric acid to be slightlysolubleboric acid phase.Moreoverthe galvaniccorrosionrate calculatedusing initialgalvaniccoupling current instead of steady state coupling current was remarked, which could give us relatively closer galvanic corrosion rate to real pressurized water reactor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.233-236
• /
• 1989

This paper deals with the expert system using network configuration and input information composed of protective relays and tripped circuit breakers. This system has knowlegebase independent on network dimension because network representation consists of the type of the matrix. Therefore, the knowlege of network representation is simplified, the space of knowlege is reduced, the addition of facts to the knowlege is easy and the expansion of facts is possible. In this paper, the network representation is defined to system matrix. This expert system based on the system matrix diagnoses normal, abnormal operations of protective devices as well as possible fault sections. The brach and bound search technique is used: breadth first technique mixed with depth first technique of primitive PROLOG search technique. This system will be used for real time operations. This expert system obtaines the solution using the pattern matching in working memory without no listing approach for rule control. This paper is written in PROLOG, the A.I. language.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권4호
• /
• pp.1401-1405
• /
• 2012

Aim: To investigate the protective effect of purified fraction 1 polysaccharide extracted from Rheum tanguticum RTP1 on irradiation-induced immune damage in mice. Methods: Kunming mice were randomly divided into five groups: normal group (NC), irradiation control group (IC), RTP1 low dose (200 mg/kg), middle dose (400 mg/kg) and high dose (800 mg/kg) groups. RTP1 was adminstered by the gastric route for 14 d, mice in the NC and IC groups being given by 0.9% sodium chloride solution in the same way. The mice in all groups except NC group were irradiated with 2.0 Gy $^{60}Co{\gamma}$-ray on the fourteenth day. Immune indives of non-specific immune function, cellular immunity and humoral immunity were assessed at the 24th hour after radiation. Results: Compared with the IC group, the spleen index, thymus index, rate of carbon clearance, phagocytic function of macrophages, lymphocyte proliferation, hemolysin value of blood serum and NK activity were increased markedly (P < 0.05 or P < 0.05). Conclusion: RTP1 has an obvious protective effects on damage in ${\gamma}$-ray radiated mice.

• Journal of Nutrition and Health
• /
• 제34권5호
• /
• pp.525-531
• /
• 2001

The present study investigated the protective effects of green tea against acute ethanol-induced lipid peroxidation and the change of antioxidative enzyme activities in various regions of rat brain : cortex, cerebellum, striatum and hippocampus. The following parameters were examined : malondialdehyde(MDA) levels and activities of superoxide dismutase(SOD), catalase and glutathione peroxidase(GSH-Px). Male Sprague-Dawley rats were given the experimental containing 1% green tea powder or control diet for 4 weeks, and at the end of feeding diet group received acute ethanol(5g/kg body weight) or equicaloric sucrose solution intragastrically. Green tea powder significantly decreased MDA levels in the striatum compared to control-non alcohol treated group to 1% green tea-non alcohol treated group without altering the antioxidative enzyme activities. Green tea resulted in a significant increase in GSH-Px activities in the hippocampus compared to either control-non alcohol treated group(0.043units/mg protein) or 1% green tea-non alcohol treated group(0.071units/mg protein). In conclusion, these results suggest that moderate consumption of green tea leaves can exert protective effects against ethanol-induced oxidative stress in brain regions, by reducing MDA concentrations in the striatum and enhancing GSH-Px activities in the hippocampus. (Korean J Nutrition 34(5) : 525∼531, 2001)

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.74-78
• /
• 2003

The corrosion failure of electronic devices has been a major reliability concern lately. This failure is an ongoing concern because of miniaturization of integrated circuits (IC) and the increased use of polymers in electronic packaging. Recently, plasma-polymerized cyclohexane films were considered as a possible candidate for a interlayer dielectric for multilever metallization of ultra large scale integrated (ULSI) semiconductor devices. In this paper the protective ability of above films as a function of deposition temperature and RF power in an 3.5 wt.% NaCl solution were examined by polarization measurement. The film was characterized by FTIR spectroscopy and contact angle measurement. The protective efficiency of the film increased with increasing deposition temperature and RF power, which induced the higher degree of cross-linking and hydrophobicity of the films.