• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.50-61
• /
• 2018

The current study aimed to review the research trends on forest liming by age, country, and research topics, and seeks to summarize the effects of forest liming on soil, vegetation and water system in forest ecosystems. The recent goals of forest liming have been changed in response to changes in the acid deposition, and related studies have been mainly carried out in Europe and North America, where there is noted a massive forest decline, which was subsequently caused by acid rain. Most forest liming studies are noted to have focused on soil responses, however, the number of studies on the responses of vegetation and water system according to a literature review on the subject were relatively small. Meanwhile, forest liming influenced whole forest ecosystems through interaction between the soil, vegetation and water system as associated with the relevant regions. The changes in soil pH, base saturation, and cation exchange capacity by forest liming were noted as different depending on the soil layer and elapsed time after liming. The responses of vegetation to forest liming were shown in above- and below-ground plant growth and plant nutrient concentration, and also were noted to have varied depending on the available regional plant species and noted specific soil conditions. The chemical properties of the water system were changed similarly to those in the soil, leading to notable changes as seen in the planktons and available fish species in the region. Finally, these results could be used to plan further studies on forest liming, which would significantly benefit regional studies to promote the preservation of the species noted for protection in the region.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.15
• /
• pp.169-209
• /
• 2001

As a domain name can be registered simply by filing an application for registration, disputes over the domain name between the holder of domain name and the holder of trademark increased. Since the holder of trademark who was late for registering domain name is willing to pay for the return of domain name, cybersquatters increased. Cybersqatters are not genuine users of the Internet. This article is to compare the construction of law by American Courts and by Korean Courts and to assert the creation of the law similar to the law of US as to anti-cybersqatting. American Courts applied the Trademark Act and the Anti-Dilution Act to resolve the disputes over domain name. To apply the Trademark Act, the Court required the plaintiffs to prove that the goods or the services expressed by the domain name should be identical or similar to the goods or the services represented by the trademark. However, there were many cases where the holder of domain name used it for the goods or the services irrelevant to those of the holder of trademark. Also, the Anti-Dilution Act could not successfully protect the holder of trademark from cybersquatters because it required that the trademark should be famous or distinctive. As a result, the US promulgated a new law which is designed to prohibit cybersquatters from being free of sanction by the existing laws. Korea Courts applied the Trademark Act and the Unfair Competition Prohibition Act to the cases disputing domain name. Likewise in the US, Korean Courts must cope with the issue of identity of the goods or the services, and the famousness or distinctiveness of trademark. The Courts hesitate to give a winning judgement to the holder of trademark simply because the domain name of alleged violator confused the trademark. Some scholars advocate the broadening of construction of the Unfair Competition Prohibition Act to illegalize cybersquatting but it is beyond the meaning of the law. Accordingly, it is a time to make a law similar to the Anti-Cybersquatting Act of the US. The law must be a fair and reasonable compromise to resolve the collision between system of registration of domain name and the system of registration of trademark. Some commentators advocate that the registration of domain name should be examined just as the one of trademark and to facilitate it, the Patent and Trademark Office should have jurisdiction of registration of domain name. But it abandons the distinction of domain name and trademark and results in obstructing e-commerce. By adopting the Anti-Cybersqatting Act, we can prohibit it. In other cases, we get a reasonable adjustment between the holder of domain name and the holder of trademark through the Trademark Act and the Unfair Competition Prohibition Act.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.81-88
• /
• 2004

We review the adaptation strategies of the 21st climate change in an application to sea level rise. For the development of appropriate adaptation strategies on the coast vulnerable to the sea level rise, we have to consider the issues such as where to adapt, how to adapt, and when to adapt. The coastal target needed adaptation can be found by the evaluation of adaptive capacity of the coastal zone which requires the understanding of impacts and adaptive potential of the natural and socioeconomic systems in the coastal zone. Planned adaptation options to sea level rise can be classified into three generic approaches as managed retreat, accommodation, and protection In practice, the implementation of the options requires the analysis of land use, degree of vulnerability, cost and benefit, etc, and may be combination of the options rather than one approach. In terms of the response timing, the adaptation can be grouped as anticipatory and reactive ones. Generally it is more effective to consider both anticipatory and reactive adaptations at the same time for the impacts of future sea level rise. Due to the scientific uncertainty of climate change issues including sea level rise, the adaptation processes have to be designed to deal with a series of processes such as information md awareness establishment, planning and design implementation, and monitoring and evaluation in continuity and long-term period.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.389-396
• /
• 2015

The liver fibrosis is a disease we often see in clinical medicine, and the persistence and repeatition of inflammation and necrosis of liver cells continue for several years, and it is proceeded to cirrhosis. So decrease of death rate and prevalence rate by complications of cirrhosis and hepatocellular carcinoma is main task of clinical medicine by protection of chronic liver ailment patients from proceeding to cirrhosis and hepatocellular carcinoma. So this study tried to represent the ultrasonic image, blood test, the relationship with liver stiffness of diffuse liver ailment patients as numbers. This study was performed with patients from whom the image was taken by ultrasonic and 141 people who were treated by fibroscan, the basic data for blood test was obtained from the test results at the time when ultrasonic image and liver fibroscan was performed. The statistical analysis was performed by One-way analysis of variance(ANOVA) to verify difference between groups. The value of liver stiffness was increased in the order of normal, chronic liver disease and cirrhosis. As a results, ALT and Albumin have no statistical difference between object groups, and there are statistical differences in the results of ultrasonic decoding at age, AST, ALP, Bilirubin, PLT, PT, and kPa, and they are statistically meaningful(p<0.005). And the value of liver stiffness of chronic liver ailment was presented only as over 12.5kPa in other study, but it was represented as numbers for quantitative diagnosis by presenting average kPa threshold value according to disease in this study. And by presenting relationship of diagnosed results, it is considered that it could be used as first tool to diagnose chronic liver ailment patients according to their disease.

• KIISE Transactions on Computing Practices
• /
• v.23 no.5
• /
• pp.284-292
• /
• 2017

With the development of Internet of Things (IoT) technology, the combination of ICT and medical services has been increasing to improve the quality of medical services. Using the IoTs, we can collect personal health information continuously in a patient's everyday life. We expect that this will improve the quality of medical service through analysis. However, the problem of ensuring the protection of personal information within the personal health information has been hampering the research, development, and application of such services. Other problems include lack of IoT devices and lack of user convenience for collecting health information about a patient's everyday life. Therefore, in this study, we construct a daily health information management service that can collect the health related information at any time and store this data in personal storage. This data is then only provided to the healthcare worker when necessary. We built a test bed for an IoT-based smart home platform and are currently conducting user experiments. Based on the results of this study, we are attempting to provide a high quality medical trial service based on daily health information through linkage with medical device manufacturers, medical clinics, insurance companies, etc. We expect the proposed health information management service will contribute to the revitalization of smart health care services via activating various health related IoT devices and analyzing daily health information.

• Structural Engineering and Mechanics
• /
• v.72 no.5
• /
• pp.643-652
• /
• 2019

Protection of cultural heritage and carrying it to the future are at the top of the significant topics of research and implementation in engineering in the 21st century. There are several historical structures in the district of Ahlat located in the east of Turkey on the Lake Van Basin that has harbored many civilizations. Some of such works are the gravestones that are found in the Ahlat Seljuk Cemetery, which is the oldest and largest cemetery in the district. This study firstly provides information about the Ahlat Seljuk Cemetery and the gravestones found in it. Observation-based structural analyses were carried out on these gravestones that are found in this area that are known to have belonged to different civilizations based on their physical and constructional characteristics. These stones were built out of Ahlat stone as single pieces. Information is provided on the damages that have occurred on the gravestones in time and their causes. In general, losses of mass, abrasions, separations, collapses and calcifications due to natural conditions, as well as vegetative formations, were observed in the gravestones. To provide an example of other gravestones within the context of the study, the gravestone that is known to belong to the person named Nureddin Ebu Hasan was selected. As a result of the modeling that was carried out for this gravestone by using the finite elements method, modal analyses were carried out. With these analyses, for the gravestone, period, effective mass participation rates and stress values were calculated. The stress values that were obtained in this study were compared to the material safety stress values that were obtained in previous studies. Additionally, QR code application was created for the gravestone that was selected as an example in the study, and information on this gravestone was transferred to an electronic environment. The QR code application includes different language options, visuals of the gravestone and information on the gravestone. The QR application was also supported with a video of the cemetery where the gravestone is located. With this application, access to information about gravestones will be possible by using tablets and smartphones. With a QR code to be created for each gravestone, these gravestones will obtain identity cards.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.161-170
• /
• 2006

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered on the inner surface of hot cell and surface of equipment in hot cell. It was necessary to develop a filtration equipment to reuse the PFC waste solution generated on PFC decontamination due to the high cost of PFC solution and for minimization of the volume of second waste solution. The filtration equipment was developed to remove hot particulate in PFC waste solution. It was made suitable size and weight in consideration of hot cell gate and crane. And it has wheels for easy movement. Flux of the filtration equipment decreased with particulate concentration increase. It consists of pre-filter($1.4{\mu}m$) and final-filter($0.2{\mu}m$) for protection of the flux decrease along filtration time. It treatment capacity of waste solution is 0.2 L/min.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.3
• /
• pp.241-247
• /
• 2010

The Effects of operating parameters such as initial pH, gaseous ozone concentration, supplied gas flow rate on dissolved ozone concentration and phenol degradation in ozone contact reactor were investigated. Dissolved ozone concentrations were saturated to constant values after a certain ozone contact time. The saturation values were influenced by experimental parameters. Dissolved ozone concentration decreased with the increase of initial pH because the ozone is unstable in high pH regions. The gaseous ozone concentration in a constant gas supply affected the saturation concentration of dissolved ozone and the injection rate of gas with a constant ozone concentration determined the rate to reach dissolved ozone saturation. Effects of operating parameters on phenol degradation were closely related with those of parameters on dissolved ozone concentration. Phenol degradation was enhanced by the increase of initial pH, because the degradation of dissolved ozone gave birth to free radicals which have much higher reactivity with phenol. Increase of gaseous ozone concentration and gas flow rate promoted the phenol degradation through the generation of dissolved ozone which plays the role in phenol degradation. The injection of methanol deteriorated the phenol degradation through the scavenging effect on OH radicals.

• Journal of KIISE:Software and Applications
• /
• v.35 no.3
• /
• pp.149-161
• /
• 2008

As Programmable Logic Controllers(PLCs) are frequently used to implement real-time safety critical software, testing of PLC software is getting more important. We propose a structural testing technique on Function Block Diagram(FBD) which is one of the PLC programming languages. In order to test FBD networks, we define templates for function blocks including timer function blocks and propose an algorithm based on the templates to transform a unit FBD into a flowgraph. We generate test cases by applying existing testing techniques to the generated flowgraph. While the existing FBD testing technique do not consider infernal structure of FBD to generate test cases and can be applied only to FBD from which the specific intermediate model can be generated, this approach has advantages of systematic test case generation considering infernal structure of FBD and applicability to any FBD without regard to its intermediate format. Especially, the proposed method enables FBD networks including timer function blocks to be tested thoroughly. To demonstrate the effectiveness of the proposed method, we use trip logic of bistable processor of digital nuclear power plant protection systems which is being developed in Korea.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.97-109
• /
• 2011

As a marketing vehicle to survive in intensified retailing competition, retailer brand development has been adopted by retailers in Korea. As evidence, the retailer brand share of a major retailer, Tesco Korea, has grown from 20% in 2007 to 22.8% in the first half of 2008. It means that retailers have provided more and more retailer brand foods for customers. With the growing accessibility to retailer brand foods, it would be expected that the number of retailer brand food claims will increase. Customers have increasingly exposed to a variety of marketing activities conducted by retailers. When buying the retailer brand foods, customers tend to be affected by marketing activities of retailers. Despite the fact that customers trust retailers and then, buy their brand foods, in case of food accidents caused by production process, customers have to seek compensation from a retailer brand supplier. Of course, a retailer tends to shift its responsibility to its suppliers. Accordingly, it is not easy for customers to solve food claims. The research, therefore, aims at exploring the relationship between the buying-decision processes of retailer brand customers and which side takes legal responsibility for food claims. To effectively achieve the research aim, the author adopted a quantitative and a qualitative research technique, in order to supplement the disadvantages of each method. Before field research, based on the developed research model, the author pre-tested questionnaire with 10 samples, amended, and handed out to 400 samples. Amongst them, 316 questionnaires are available. For a focus group interview, 9 participants were recruited, who are students, housewives, and full-time workers, aged from 20s to 40s. Through the focus group interview as well as the questionnaire results, it was found that most customers were influenced by a retailer or store image in a customer's mind, retailer reputation and promotional activities. Surprisingly, customers think that the name of a retailer is a more important factor than who produces retailer brand foods, even though many customers check a retailer brand supplier, when making a buying-decision. Rather than retailer brand suppliers, customers trust retailers. That is why they purchase retailer brands. Nevertheless, production-related food claims is not involved with retailers. In fact, it would be difficult for customers to distinguish whether a food claim is related to selling or manufacturing processes. Based on research results, from a customer perspective, the research suggests that the government should require retailers to take the whole responsibility for retailer brand food claims, preventing retailers from passing the buck to retailer brand suppliers. In case of food claims, in order for customers to easily get the compensation, it is necessary to reconsider the current system. If so, retailers have to fully get involved in retailer brand production stage, and further, the customer awareness of retailer brands will be improved than ever before. Retailers cannot help taking care of the whole processes of retailer brand development, because of responsibility. As a result, the process to seek compensation for food claims might become easier, and further, the protection of customer right might be improved.