• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.316-325
• /
• 2002

This paper investigates the restoration schemes which are applied to the MPLS domain upon a network failure. We define the following three restoration service models by combining the various restoration schemes: "FIS-based protection service" (FIS: failure indication signal), "inversion traffic protection service" and "1+1 protection service". After a qualitative analysis of the performance in them, we have analyzed it on quantitative basis by the simulation. According to the simulation results, "1+1 protection service" guarantees the fastest and most lossless restoration service among them; however, it results in consuming considerable bandwidth and producing an amount of control traffic, which means poor network utilization. On the other hand, "FIS-based protection service" spends less bandwidth and generates less control traffic, which means better network utilization, but produces poor restoration service. "Inversion traffic protection service" provides the medium restoration service and utilization between "1+1 protection service" and "FIS-based protection service."

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.124-129
• /
• 2014

This paper describes the analysis of the effect on personnel computer in case of turning off power supply of main breaker in general electrical installation. In order to analyze the effect on personnel computer in case of turning off the power supply of main breaker, the switching impulse generator has been designed and fabricated which makes it possible to evaluate the effect on electrical product by switching impulse. The switching impulse tests were carried out for personnel computer according to applied voltage and number of switching impulse. As a consequence, switching impulse had not a significant influence on personnel computer in this study. The varistor of power input section functions as a protection of switching impulse as well as lightning impulse. The results will be used to related organization, and electrical product manufacturer, and residents.

• 전기의세계
• /
• v.28 no.7
• /
• pp.49-55
• /
• 1979

This paper describes the mechanisms which breaks A.C. over-current protection in low voltage load. For the high speed over-current protection, it consists of thyristor switching circuit by forced commutation, IC logic gate controlled circuit and over-current detector with reed switch. Under various duty conditions, breacker was carried out several experiments and discussions. The results are as follows; (1) over-current cut off is possible within a quarter cycle (4ms at 60Hz) and clear is at least ten times faster than its electromechanical equivalent. (2) as the forced commutation thyristor circuit breaker has capability of high speed break, equivalent surgy current capacity of switching thyristor is increased more than twenty times of its rated current. (3) breaker using solid state dose not produce any harmful arc during switching period. Therefore the breaker above described may be considered an effective over-current protector for soli state power devices in industrial applications.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1835-1841
• /
• 2017

An improved single-phase full-bridge zero-voltage-switching inverter using a subtractive coupled magnetics is proposed in this paper. The proposed topology overcomes several drawbacks of the conventional ARCPI zero-voltage-switching inverter including two bulky capacitors which can cause problems such as the need for a protection circuit and voltage fluctuation of split capacitors. Also the proposed topology can reduce the number of devices required for ZVS through a simplified auxiliary circuit, thus achieving low cost and small volume and is applicable a modified unipolar PWM scheme. Detail mode analysis and design considerations are provided for optimal efficiency. In the end, the effectiveness and feasibility of the proposed topology are verified experimentally under various conditions.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.746-748
• /
• 1993

To overcome the problem of the diode reverse recovery in high switching frequency inverter, a new gate drive scheme is proposed for IGBT in this paper. Using this circuit, the reverse recovery current can be controlled and faster switching time can be achieved for hard switching inverter. The over-current protection method, which is suitable for the proposed gate driver, is also presented. The operation of the proposed circuit is investigated and its usefulness is verified through the experimental results.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.89-96
• /
• 1993

In this paper, an OPS(Optical Protection Socket) unit is designed and prototyped for the application in the optical CPN(Customer Premises Network). The OPS unit, which plays an important role in the CPN for the enhanced network reliability, is consisted of $1{\times}2$ optical fiber splitter, combiner, and $1{\times}1$ optical switch to be a hybrid-typed unit. Various considerations, about power burget and optical information loss have given the most practical design for OPS. From the measurement of the realized OPS unit, it has proved such as the pertinent switching delay time with minimum data loss, the perceptive ability on the ONU degradation, the switching ability on the ONU malfunction.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.149-155
• /
• 2006

In this study, the design of low voltage DC-DC converter with low triggering ESD (Electro-Static Discharge) protection circuit was investigated. The purpose of this paper is design optimization for low voltage(2.5V to 5.5V input range) DC-DC converter using CMOS switch. In CMOS switch environment, a dominant loss component is not switching loss but conduction loss at 1.2MHz switching frequency. In this study a constant frequency PWM converter with synchronous rectifier is used. And zener Triggered SCR device to protect the ESD phenomenon was designed. This structure reduces the trigger voltage by making the zener junction between the lateral PNP and base of lateral NPN in SCR structure. The triggering voltage was simulated to 8V.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1997.10a
• /
• pp.11-13
• /
• 1997

Abstract - An electronic starter using MOSFET has been designed to take advantage of ideal preheating and starting features which can extend the lifetime of fluorescent lamps. The preheating circuit of the developed electronic starter is consisted of four parts - afull-wave rectifier circuit, an FET switching circuit a timer circuit for the gate switching, and a circuit for end-of-life protection. The circuit is analyzed by using PSpice simulation, and is improved to give an appropriate starting-time through control of R-C time constant of the timer circuit. And the circuit is also provided with an end-of-life protection feature, which utilizes the negative resistance characteristics of a thermistor that is thermally linked to FET through a heatsink. This also protects the FET from any overheating problems. From the results of simulation it is possible to obtain an appropriate value on the starting time for proper ignition and also it is verified that the limit for resistance of the thermistor is dependant on the value of resistance is the timer circuit

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.93-94
• /
• 2014

Recently, According to increase of power demand, it was increased a demand that switching power supply have characteristic of low-loss and high-efficiency. So increase of using device, the failure rate increases and service life problem arises. Even though normal circuit protection is applied in designing stage, it is often hard to identify the cause of malfunction in certain cases such as fatigued power supply due to over-running, malfunctions of main elements or over heating. This report will cover experimental results with the prototype we made, that monitors the efficiency of switching power supply and that protects a circuit when it drops below the standard value.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.75-81
• /
• 1997

The switching components to control the speed of dc motor, which perform vital fuction in a modern motor vehicle or a ship, are susceptibile to suffer damage or upset by switching transient. An equivalent circuit was derived, in this paper, to select an ideal component having immunity against the switching transient among varisotor, zenner diode, etc. Furthermore, we have carried out the optimal improved transient protection circuit design in the view of cost effectiveness, proper wave form of transient defined by the international regulations. The process and cause of the damages in the switching components were examined. Then, the immunity improvement of semiconductor switching components to control a dc motor has been achieved considering impedance condition accoring to the variation of the diverting transient current.