• 산업기술연구
• /
• 제24권A호
• /
• pp.67-73
• /
• 2004

The purpose of this study is to analyze the vibration signal of the revolution machine using the STFT(Short Time Fourier Transform). It is common to analyze the frequency of signal through FFT algorithm with the fixed sampling rate. However, in this situation the order spectrum information useful rather than the general frequency information with the fixed sampling rate. In this paper, the resampling technique was used for getting the information of order spectrum. In resampling process, the arithmetic amount and MSE(Mean Square Error) for various kinds of the signal interpolation was compared and presented the propriety of the interpolation method while developing analysis equipment. Order tracking was implemented using signal interpolation method which it has selected. Then the analyzed results were obtained through simulation using the STFT technique.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.709-717
• /
• 2004

Flux-reversal machine (FRM) is a new brushless doubly salient permanent magnet machine. Its operation is similar to that of the brushless DC motor, so it can be driven by 120 degree square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed. In this driving method, the back electromotive force (BEMF) current in the open phase is generated by the BEMF. It can be appeared or disappeared according to the changes of the neutral voltage of the machine. In this paper, the time-stepped voltage source finite-element method taking BEMF current into account is proposed. Its influences on the performances of the FRM are also investigated. To prove the propriety of the proposed analysis method, a Digital Signal Processor (DSP) installed experimental devices are equipped and the experiment is performed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권11호
• /
• pp.582-588
• /
• 2006

This paper presents the characteristics analysis and normal force minimization of a synchronous permanent magnet planar motor(SPMPM) with Halbach magnet way. Firstly, the flux density distribution is calculated by analytical method; then, the characteristics of this SPMPM are evaluated, some experiments have been done to verify the analysis propriety and to investigate the interaction among the characteristics; At last, the normal force is minimized by using genetic algorithm and it is decreased from 672.83[N] to 144.24[N] remarkably.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.650-657
• /
• 2007

Since the railroad accidents due to the human error occupy considerable proportion among the railroad accidents, it is necessary to study the propriety of the physical examination system for the railroad workers. Our government is promoting some systematic supplementation for railroad safety on the basis of the Railroad Safety Act. In this paper, we perform a comparative analysis of domestic and foreign physical examination systems for railroad workers. We also compare the physical examination system for public officials with that for railroad workers. Then we consult expert opinions of the Korean Society of Occupational and Environmental Medicine. Through the comparative analysis, we provide useful information that is needed to amend the physical examination system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.788-789
• /
• 2008

This paper deals with the loss distribution analysis of 250 kW traction induction motor using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the characteristics under the effect of saturation and hysteresisloss. The focus of this paper is the efficiency evaluation relative to hysteresis loss, copper loss, etc. on the basis of speed condition a 250 kW Traction Induction Motor. Computer simulation and experimental result for the efficiency using dynamometer show the propriety of the proposed method.

• 통상정보연구
• /
• 제12권4호
• /
• pp.279-302
• /
• 2010

A better selection model on management innovative enterprises is needed since the Korean government provides multi benefits to those selected enterprises. However, the selection model's propriety is suspicious because of the shortage of consideration of assessment items. In particular, the most important two assessment items, strategy and performance are suspected of multicollinearity because of high correlation scores. No consideration on multicollinearity among those items leads to erroneous selection which doubly counts the same components with different item names. The principle component analysis is applied to factor out the uncorrelated items. Using the resulted principle components, the new estimations are carried out. The comparison between estimated results from using principle components and non principle components shows that the present selection model overly considers the performance items compared to the real effect of items, which is a result of multicollinearity between performance and strategy.

• 한국학교수학회논문집
• /
• 제3권2호
• /
• pp.133-154
• /
• 2000

The purpose of this study is to analyze theoretically suggested performance test and find out the actual conditions is math class at high schools and to suggest some devices for improvement for the various problems. To achieve this goal of study, I applied a performance test to the first graders of high school for one semester, and analyzed various phenomena which appeared during its practice. I made several questionnaire based on the materials of an academic seminar, "Several questions and devices for the improvement on mathematics performance test" And through the analysis, I pointed several problems of the performance test and proposed alternative plans. Several practical alternatives can be suggested for the problems appeared in the operation of performance test. The most important thing than any other technical solution in teachers′ diverse endeavor and enthusiastic research attitude to overcome the difficulties. Teachers′ spontaneousness is the foundation to enhance their own specialty and eradicate the propriety of the performance test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.84-87
• /
• 2002

The plunger speed of solenoid actuator is affected by mass of plunger magnetic motive force. inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this paper, we performed the FEM analysis for non-magnetic ring which is used for increasing attraction force and plunger speed by concentration of effective magnetic flux, and also performed simulation for dynamic characteristics of plunger. And, we proved the propriety of these by experiments.

• 농촌계획
• /
• 제10권1호
• /
• pp.1-7
• /
• 2004

There are recently many studies on evaluating the economic value of multi-functionality of rural areas. However, the regional difference of economic value leads a problem of different evaluation on its economic value for each region in its application to government policy. This problem causes an increase in cost because it creates restriction in policy decisions which put their importance on the time of their execution. This study investigates the propriety of value transfer using Meta Analysis after evaluating the social and cultural value of rural areas among their functions based on CVM model. It finds that the regional difference in the willingness to pay is 0.13% to 31.42%.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권10호
• /
• pp.484-490
• /
• 2003

This paper describes with the stator analysis and design of a ring type ultrasonic motor. The design for piezoelectric ceramic and elastic body of stator were calculated by using the finite element method (FEM) that consider the resonance frequency, vibration mode and coupling efficiency. Namely, such results were acquired the calculation result of the piezoelectric ceramic thickness 0.5[mm], elastic body thickness 2.0[mm], resonance frequency 51.8[kHz], vibration mode 7 order and coupling efficient 12.5[%], the outer and inner diameter of vibrator 50[mm], 38[m]. On the basis of such result, the ring type ultrasonic motor was manufactured. Also for driving characteristics of ring type ultrasonic motor, 2-phase inverter was constructed. Then the propriety of this paper was established from comparision of the simulation and an experiment results of the ring type ultrasonic motor.