• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.3
• /
• pp.333-339
• /
• 2010

Particle removal is an important step taken at water treatment plants (WTPs) for the safety of tap water due to its proportionality to the pathogen inactivation. Government promulgated a treatment technique for the optimization of filtration including continuous turbidity monitoring using on-line turbidimeters. Based on the turbidity measurements of 460 filters at 31 WTPs operated by K-water, the evaluation of filtration performance and the investigation of major causes related to particle breakthrough were explored. 98.1 % of the filters had an effluent turbidity measurement which was less than 0.1 NTU, but turbidity breakthrough of more than 0.3 NTU was noticed occasionally which is in violation of AWWA 5-Star guidelines. It was shown that the optimization of coagulation, filter-to-waste, the observance of optimal filtration velocity and backwashing process based on filtrate turbidity were crucial for the improvement of filtrate.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.1-7
• /
• 1989

For H-polarized incident plane wave, an exact integral expression for the scattered field by an inversely tapered resistive half plane is obtained by using Kontorovich-Lebedev transform. Uniform asymptotic results available for all angles are obtained, and non-uniform asymptotic results which provide the ray-optical interpretation of the calculated scattered field are also obtained. The edge diffraction patterns for several values of inverse proportionality of resistivity are shown. We find out that the results are in agreement with physical reasoning.

• Journal of Korean Elementary Science Education
• /
• v.32 no.4
• /
• pp.485-494
• /
• 2013

The purpose of this study was to know that the 'Thinking Science' activities affects the enhancement of critical thinking skill by the logical thinking skill about pupils in the $5^{th}$ and $6^{th}$ grade of elementary school in Korea. The 19 activities of 'Thinking Science' as the teaching materials was implemented to 40 pupils in elementary school over 13 weeks. Results indicated that the experimental group presented statistically meaningful improvement in logical thinking skills(p<.05). Those teaching materials contributed to improve 3 logical sub-elements significantly(p<.05) as the proportional logical element, the probabilistic logical element, and combinational logical element. But, there was no significant improvement in conservational logical element, control of variable element, and correlational element(p<.05).

• Speech Sciences
• /
• v.12 no.1
• /
• pp.65-74
• /
• 2005

The aim of this paper is to suggest an index of coarticulation, proportional undershoot values, given the observation that absolute undershoot within a language tends to be proportional to target-locus difference. The target-locus proportionality predicts that a large difference between the consonant locus and the vowel target will result in a large amount of vowel undershoot, while a small difference a small amount of vowel undershoot. It turns out that the proportional undershoot is a potentially more appropriate way of comparing degree of undershoot across languages. However, even though the proportional undershoot measurement may provide a useful index comparing the overall coarticulation degree in a CV token for cross-linguistic data, it is concluded that it may potentially wrongly predict the cases of transfer or error as a progress in learning.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1535-1541
• /
• 1994

The void content of carbon fiber reinforced composite laminates was determined by the ultrasonic nondestructive technique. The ultrasonic immersion, through-transmission method developed stresses the utilization of spectral analysis and frequency dependence of the attenuation due to porosity. The measured attenuation shows approximately linear behavior over the frequency range investigated. The linear relationship between the void content and the attenuation slop (d $\alpha$/df) is found to hold, but the constant of proportionality is quite different for samples with different pore morphology. The void volume fraction determined by the attenuation slope agreed very well with that obtained by the acid digestion analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.59-64
• /
• 1996

When the input-output record is available, the identification of a bilinear system is considered. It is assumed that the input is noise free and the output is contaminated by an additive noise. It is further assumed that the covariance matrix of the noise is known up to a factor of proportionality. The extended generalized total least squares (e-GTLS) method is proposed as one of the consistent estimators of the bilinear system parameters. Considering that the input is noise-free and that bilinear system equation is linear with respect to the system parameters, we extend the GTLS problem. The extended GTLS problem is reduced to an unconstrained minimization problem, and is solved by the Newton-Raphson method. We compare the GTLS method and the e-GTLS method in the point of the accuracy of the estimated system parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.208-217
• /
• 2003

In order to construct the extrusion die surface of T -shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the T-shaped section and T-shaped section with rounded corners.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.4
• /
• pp.233-239
• /
• 2000

To prepare an environmental friendly high-solid coatings an acrylic resin containing 80% of solid content was synthesized by addition polymerization of caprolactone acrylate, n-butyl acrylate, ethyl methacrylate, and 2-hydroxyethyl methacrylate. The conversion was $78{\sim}93%$ and the prepared resin's physical properties are as follows: viscosity, $212{\sim}3424cps: $M_{n}$ $1740{\sim}2400$. There was a trend that viscosity and molecular weight of the resin increased with Tg, but no direct proportionality was observed.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.2
• /
• pp.76-80
• /
• 2005

In this paper, a Direct Learning Control (DLC) method is proposed for linear feedback systems to improve the tracking performance when the task of the control system is repetitive. DLC can generate the desired control input directly from the previously learned control inputs corresponding to other output trajectories. It is assumed that all the desired output functions given to the system have some relations called proportionality and it is shown by mathematical analysis that DLC can be utilized to genera additional control efforts for the perfect tracking. To show the validity and tracking performance of the proposed method, some simulations are performed for the tracking control of a linear system with a PI controller.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.348-357
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. A center point fur area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.