• Explosives and Blasting
• /
• v.9 no.3
• /
• pp.10-16
• /
• 1991

On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-situ test : Compressive strength, Point load test. 2. In-situ test Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and 5. H, test were carried out for site-engineer, This project is one of contineous works regarding to Burden test from Jack leg drill($\phi{\;}75mm$) use.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.255-259
• /
• 2002

VIRGO 104 is a low carbon martensitic stainless steel that is applied to the famous Three Gorges Project. By using VOD melting process VIRGO 104 has low carbon and [H] [O] contents, and shows excellent mechanical properties and weldability. The best solution to guarantee welding quality is PWHT by 600 Cx8h.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.13-16
• /
• 2010

This study is an Investigation on the Watertightness Properties of Rain-Block System on the Sliding-Roof Joint of Large-Span Membrane Structures. In this experimental, we test the watertightness performance of joint part of sliding door in roof of large span membrane structure(for pilot project) under environment of rain and wind. A shape of rain water blocking systems of joint part in sliding door verifies the defects and effects of water leakage prevention in precipitation with the wind conditions. For obtaining watertightness of large span membrane structures, it is necessary quality of joints and performance, and quality of membrane material of a retractable roof as well as a closed roof. Also, for obtaining quality in joints, it is essential to make a watertightness guideline for design of large-span membrane.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.387-395
• /
• 2011

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.273-280
• /
• 2006

Recently our country highly evaluate cultural value of modern construction. Before and after Japanese imperial period, diplomatic equipment, commerce equipment and brand-new modern construction of Japan and Western came into our country coercively. Especially, modern construction placed in center of the city, as previously stated, was a construction field of historical disgrace. So it leaves alone or transforms to high technology because of well located. Selctive reception of the past makes difficult to know about rightful modem, furthermore it is difficult to expect rightful future. Accordingly, I write this. paper for the purpose of presenting the space application blueprint of 'Jung Myung Jeon' of modern construction designated as the cultural properties in Seoul. According to the project, 'Jung Myung Jeon' will do a role as the keyword which is important connects a past and a present time it presents. Then modern construction 'Jung Myung Jeon' which has a culture value will develop continuous with the city.

• Journal of Information Technology Services
• /
• v.11 no.3
• /
• pp.205-225
• /
• 2012

The purpose of this study is to examine negative IT performances produced by irrational fashion-mimic IT investments in firms. Since most studies have been carried out on the assumption of rational investment decisions, many of them have revealed positive investment process and performances in firms. However, fashion-mimic investments to follow the paths of market leaders rather than rational investment decisions have been of frequent occurrence in many firms. This study divided types of mimic investments into subgroups where one subgroup has fashion-mimic properties and the other subgroup retains rational-mimic properties. We compared differences in performance of these subgroups to investigate effects of irrational investments in IT projects. The results indicated that there are differences in performance between fashion-mimic and rational-mimic investments. Additional analysis also revealed differences in performance at the presence of CEO control in the case of fashion-mimic investment subgroup.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.5
• /
• pp.13-22
• /
• 2018

The number of researches on the mechanical properties of cemented sand and gravel (CSG) materials and the application of the CSG Dam has been increased. In order to explain the technical scheme of strength prediction model about the artificial neural network, we obtained the sample data by orthogonal test using the PVA (Polyvinyl alcohol) fiber, different amount of cementing materials and age, and established the efficient evaluation and prediction system. Combined with the analysis about the importance of influence factors, the prediction accuracy was above 95%. This provides the scientific theory for the further application of CSG, and will also be the foundation to apply the artificial neural network theory further in water conservancy project for the future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1063-1068
• /
• 2000

Latex modified concrete (LMC) has grown to be accepted as a standard material of construction overlaying bridge decks in America due to its superior physical and chemical properties. The properties of latex, combined with the low water-cement ratio, produce a concrete that has improved flexural, tensile, and bond strength, lower modulus of elasticity, increased freeze-thaw resistance, and reduced permeability compared to conventional concrete of similar mix design. LMC overlays have been service in excellence for 30 years on thousands of bridge in U.S.A. This may, also, prolong the life cycle of bridge deck once it is adopted in Korea. The self-contained, mobile, continuous mixer is most appropriate particularly for concrete quality assurance. Assuring quality on a bridge deck overlay project should begin in the design phase and continue after the construction is completed. Quality should be the concern of everyone involved-owner, designer, and contractor.

• Steel and Composite Structures
• /
• v.35 no.4
• /
• pp.567-578
• /
• 2020

Based on third-order shear deformation shell theory, the present paper investigates post-buckling properties of eccentrically stiffened metal foam curved shells/panels having initial geometric imperfectness. Metal foam is considered as porous material with uniform and non-uniform models. The single-curve porous shell is subjected to in-plane compressive loads leading to post-critical stability in nonlinear regime. Via an analytical trend and employing Airy stress function, the nonlinear governing equations have been solved for calculating the post-buckling loads of stiffened geometrically imperfect metal foam curved shell. New findings display the emphasis of porosity distributions, geometrical imperfectness, foundation factors, stiffeners and geometrical parameters on post-buckling properties of porous curved shells/panels.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2023-2025
• /
• 2000

Globally, movements for an environmental preservation have been further extended in all the areas of industries. In the manufacturing area. environment-friendly properties for all the manufactured products are increasingly required by many national standards. For EHV oil-filled cables. Hard Alkylbenzen has been applied as an impregnated insulating oil. But as it flows into the soil during failures, such as oil leakage, the oil is not dissolved by microbes and then causes an environmental pollution. Recently some countries are increasingly requiring Soft Alkylbenzen which is dissolved by microbes. This paper describes the electrical and environmental properties of Soft Alkylbenzen. applied for a 230kV oil-filled cables at a Singapore's project.