• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_3$(0.05$\leq$x$\leq$0.20)-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1480~150$0^{\circ}C$ and 4 hours, respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, $\varepsilon$$_{r}$>50000, tan$\delta$<0.05, $\Delta$C<$\pm$10%. The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.ulating layers.s.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.690-696
• /
• 2006

Thickness of damping layer in sandwich plate needs to be optimized in order to make modal loss factor of the sandwich plate maximum. Since previous studies were interested in noise reductions over high frequency range, the modal properties were derived based on simply supported boundaries. This conventional formula is approximately applicable to other boundary conditions over high frequency range only. The purpose of this study is to propose a method to determine optimum damping layer thickness of sandwich plate for maximum modal damping in low frequency range when the boundary condition is not a simple support. The conventional RKU equation based on simply supported boundary is modified to reflect other boundary conditions and the modified RKU equation is subsequently applied to determine the optimum damping layer thickness for arbitrary conditions. In order to reflect frequency-dependent characteristics of elastic modulus of the damping layer, an iteration method is proposed in determining the modal properties. Test results on sandwich plates for optimum damping layer thickness are compared with predictions by the proposed method and conventional method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1966-1971
• /
• 2003

Matching inviscid and boundary layer methods are developed for hypersonic flow with thick boundray layer. The new equations match all the boundary layer properties with a variation in the inviscid solution near the edge, except for the normal velocity. Computational comparison are performed for incompressible and compressible flows over a flat plate. Results from the present method are compared with Navier-Stokes solutions. The present results are in good agreement with Navier-Stokes solutions. They show that the new technique can provide improved heating rates and skin friction predictions for preliminary design of vehicles where shear layers and entropy layer swallowing are important.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2319-2324
• /
• 2005

This paper proposes a intelligent gain and boundary layer based sliding mode control (SMC) method for robotic systems with unknown model uncertainties. For intelligent gain and boundary layer, we employ the self recurrent wavelet neural network (SRWNN) which has the properties such as a simple structure and fast convergence. In our control structure, the SRWNNs are used for estimating the width of boundary layer, uncertainty bound, and nonlinear terms of robotic systems. The adaptation laws for all parameters of SRWNNs and reconstruction error bounds are derived from the Lyapunov stability theorem, which are used for an on-line control of robotic systems with unknown uncertainties. Accordingly, the proposed method can overcome the chattering phenomena in the control effort and has the robustness regardless of unknown uncertainties. Finally, simulation results for the three-link manipulator, one of the robotic systems, are included to illustrate the effectiveness of the proposed method.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.165-173
• /
• 2004

Matching inviscid and boundary layer methods are developed for analysis of hypersonic flow with thick boundary layer. The new equations match all the boundary layer properties with a variation in the inviscid solution near the edge, except for the normal velocity. Computational comparison are peformed for incompressible and compressible flows over a flat plate. Results from the present method are compared with Wavier-Stokes solutions. The present results are in good agreement with Wavier-Stokes solutions. They show that the new technique can provide improved predictions of heating rates and skin friction predictions for preliminary design of vehicles where shear layers and entropy layer swallowing are importantfor for preliminary design.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.949-956
• /
• 2006

The method of Greenwood and Williamson is extended to obtain a solution to the coupled non-linear problem of steady-state electrical and thermal conduction across a crack in a conductive layer, for which the electrical resistivity and thermal conductivity are functions of temperature. The problem can be decomposed into the solution of a pair of non-linear algebraic equations involving boundary values and material properties. The new mixed-boundary value problem given from the thermal and electrical boundary conditions for the crack in the conductive layer is reduced in order to solve a singular integral equation of the first kind, the solution of which can be expressed in terms of the product of a series of the Chebyshev polynomials and their weight function. The non-existence of the solution for an infinite conductor in electrical and thermal conduction is shown. Numerical results are given showing the temperature field around the crack.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of $(Sr_{1-x}\cdot Ca_x)TiO_3(0.05{\leq}x{\leq}0.20)$-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1480\sim1500^{\circ}C$ and 4 hours. respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, ${\varepsilon}_r$ >50000, tan$\delta$ <0.05, ${\Delta}C$ < ${\pm}10%.$ The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1189-1198
• /
• 2005

Direct numerical simulations were performed to investigate the physics of a spatially developing turbulent boundary layer flow subjected to spanwise oscillating electromagnetic forces in the near wall region. A fully implicit fractional step method was employed to simulate the flow. The mean flow properties and the Reynolds stresses were obtained to analyze the near-wall turbulent structure. It is found that skin friction and turbulent kinetic energy can be reduced by the electromagnetic forces. The decrease in production is responsible fur the reduction of turbulent kinetic energy. Instantaneous flow visualization techniques were used to observe the response of streamwise vortices and streak structures to spanwise oscillating forces. The near-wall vortical structures are affected by spanwise oscillating electromagnetic forces. Following the stopping of the electromagnetic force, the flow eventually relaxes back to a two-dimensional equilibrium boundary layer.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.18-28
• /
• 2022

The turbulence stimulation effect of studs for boundary layer over a flat plate was investigated through the flow measurement in KRISO cavitation tunnel. For the test, Laser Doppler Velocimetry (LDV) and three flat plate models were used: (1) flat plate without studs; (2) flat plate with one stud row; (3) flat plate with two stud rows. The dimension and location of stud rows and the inflow speed were selected considering test conditions for standard-sized model ships in KRISO towing tank. The boundary layer characteristics of test models were analyzed and compared in terms of mean velocity profiles, turbulence intensity profiles, boundary layer thickness, and shape factor. In the case of the flat plate without studs, transition from laminar to turbulent flow occurred around Re_x=3.83 ~ 5.19 × 10⁵. In the case of flat plates with stud rows, the flow rapidly changed into turbulent flow right after passing the first stud row. In the state where turbulence was already developed, the second stud row slightly increased the turbulence intensity near the top of the stud, but did not significantly affect the boundary layer characteristics such as mean velocity distribution, boundary layer thickness, and shape factor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
• /
• pp.72-75
• /
• 2001

In this paper, the $Sr_{1-x}Ca_{x}TiO_{3}(0{\leq}x{\leq}0.2)$ 2)-based grain boundary layer ceramics were fabricated to measured dielectric properties and voltage-current properties. The sintering temperature and time were $1420\sim1520^{\circ}C$, 4hours, in $N_{2}$ gas, respectively. The structural and the dielectric properties were investigated by SEM, X-ray, HP4194A and K6517. The 2nd phase formed by thermal diffusion from the surface lead to a very high apparent dielectric constant, $\varepsilon_r$ > 50000. X-ray diffraction patterns exhibited cubic structure for all specimens. Increasing content of Ca, the peak intensity were decreased.ﱇﶖ⨀ਆᘍ܀㘱㔮㠹㬅K䍄乍