• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.121-128
• /
• 2020

Purpose: The Rubus coreanus fruit (RF) is an important traditional medicinal herb having antioxidant, anti-inflammatory, and immunoregulatory properties. These activities are known to change dramatically, depending on maturity of the RF. It is presumed that change of functional components, such as flavonoids, tannins, phenolic acids, triterpenoids and organic acids in RF, affect the various bioactivities. This study aimed to confirm changes in the anti-melanogenic effects of RF based on maturity, and to identify the bioactive compounds responsible. Methods: The cell viability of mature RF (MRF) and immature RF (IRF) extracts was investigated using B16F10 cells. To compare the anti-melanogenic effect of MRF and IRF extracts, we first assessed the melanin content. High-performance liquid chromatography analysis was performed to evaluate changes in the level of ellagic acid according to maturity of the RF. In addition, tyrosinase inhibitory activity of both extracts was examined. Results: MRF and IRF extracts (50-200 ㎍/mL) do not affect the cell viability of B16F10 melanoma cells. IRF extract more effectively inhibited melanin synthesis than MRF extract. The content of ellagic acid in IRF extract was higher than that obtained in MRF extract. Furthermore, greater inhibition of tyrosinase activity was observed after exposure to IRF extract than MRF extract. A positive correlation was determined between ellagic acid content and tyrosinase inhibitory activity, and a negative correlation was obtained between ellagic acid content and melanin content. Taken together, our results indicate that ellagic acid is one of the major bioactive compounds of RF that imparts a whitening effect. Conclusion: Our results indicate that ellagic acid in MRF and IRF extracts affect the anti-melanogenesis effect through inhibition of tyrosinase activity. Therefore, the ellagic acid rich IRF has greater potential for application as a natural and functional cosmetic material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.435-442
• /
• 2020

This study was conducted to investigate the effect of different raising periods (24 and 48 months) on the physico-chemical quality and fatty acid composition of meat from Korean native black goats. In terms of proximate composition, the meat from the 24-month age-group of the goats contained lower moisture and protein content and higher fat and ash content than that from the 48-month age-group. With an increase in age, moisture and protein content increased, whereas fat and ash content decreased. The pH was higher as was the cooking loss in the meat from the 24-month age-group than in the meat from the 48-months age-group (p < 0.05). However, there was no significant difference in the water-holding capacity and shear force of the meat from the two breeding periods (p > 0.05). A color analysis showed that the meat from the 24-month age-group had higher L*, a*, and b* values than the 48-month age-group (p < 0.05). The fatty acid composition and palmitic acid content increased with an increase in rearing periods, whereas stearic acid and oleic acid content decreased. The proportion of saturated and unsaturated fatty acid content was lower and higher, respectively, at 24 months of age and 48 months of age (p < 0.05).

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.52-63
• /
• 2003

Discontinuities such as faults, fractures and joints in rock mass play the dominant role in the mechanical and hydraulic properties of the rock mass. The key factors that influence on the flow of groundwater are hydraulic and geometric characteristics of discontinuities and their connectivity. In this study, a program that analyzes groundwater flow in the 3D discontinuity network was developed on the assumption that the discontinuity characteristics such as density, trace length, orientation and aperture have particular distribution functions. This program generates discontinuities in a three-dimensional space and analyzes their connectivity and groundwater flow. Due to the limited computing capacity In this study, REV was not exactly determined, but it was inferred to be greater than 25$\times$25$\times$25 ㎥. By calculating the extent of aperture that influences on the groundwater flow, it was found that the discontinuities with the aperture smaller than 30% of the mean aperture had little influence on the groundwater flow. In addition, there was little difference in the equivalent hydraulic conductivity for the the two cases when considering and not considering the boundary effect. It was because the groundwater flow was mostly influenced by the discontinuities with large aperture. Among the parameters considered in this study, the length, aperture, and orientation of discontinuities had the greatest influence on the equivalent hydraulic conductivity of rock mass in their order. In case of existence of a fault in rock mass, elements of the equivalent hydraulic conductivity tensor parallel to the fault fairly increased in their magnitude but those perpendicular to the fault were increased in a very small amount at the first stage and then converged.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.400-425
• /
• 2018

This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.220-224
• /
• 2016

Chronic inflammation, which results from continuous exposure to antigens, is one of major reasons for tissue damage and diseases such as rheumatoid arthritis and type 2 diabetes. In this study, we investigated the anti-inflammatory effects of extracts (hexane, $CHCl_3$, MeOH, $MeOH/H_2O$, and $H_2O$) from GW10-45, which is our new cultivar of an edible mushroom Pleurotus ferulae (ASI 2803 and ASI 2778), in RAW264.7 murine macrophages. None of the extracts showed cytotoxicity in RAW264.7 cells and the hexane, CHCl and H extracts reduced nitric oxide (NO) production, an important inflammatory marker, in lipopolysaccharide (LPS)-stimulated RAW264.7 cells. Particularly, the extract (CG45) inhibited NO production more than the other extracts did. To elucidate the effects of CG45 on molecular targets involved in pro-inflammatory responses, we performed western blot analysis. Expression of inducible nitric oxide (iNOS) significantly decreased in LPS and CG45 co-incubated cells compared to that in LPS only-treated cells. Additionally, another protein thatplays a critical role in inflammation, was down-regulated in cells treated with both LPS and CG45. In the nuclear factor $(NF)-{\kappa}B$ pathway, phosphorylation of $I{\kappa}B{\alpha}$ decreased in RAW264.7 cells treated with both LPS and CG45. Furthermore, CG45 inhibited the phosphorylation of $NF-{\kappa}B$ in LPS-stimulated RAW264.7 cells. Conclusively, CG45 could suppress pro-inflammatory responses in LPS-stimulated RAW264.7 cells by down-regulating not only the phosphorylation of $NF-{\kappa}B$ and $I{\kappa}B{\alpha}$ but also the expression of iNOS and COX-2 without any cytotoxicity.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.599-612
• /
• 2017

Human hair (HH) is produced as a waste from beauty parlor and barbershop. HH-based adhesives were formulated with NaOH-hydrolyzed HH, $H_2SO_4$-hydrolyzed chicken blood (CB) and PF as a crosslinking agent. Physicochemical properties and retention rate against hot water of the adhesives were measured to investigate the potential of HH as a raw material of wood adhesives. HH was composed of keratin-type protein of 80% and over. Ash of less than 0.1% was contained in HH. Among the amino acids included in HH, glutamic acid showed the highest content, followed by cysteine, serine, arginine and threonine. Solid content of the adhesives ranged from 33.2% to 41.8% depending on hydrolysis conditions of HH and PF type. Viscosity at $25^{\circ}C$ ranged from 300 to $600mPa{\cdot}s$ resulting in a sprayable adhesive. Retention rate against hot water measured to evaluate the water resistance of adhesives was the highest in the cured resin formulated with 5% NaOH-hydrolyzed HH and 5% $H_2SO_4$-hydrolyzed CB. Meanwhile, the molar ratio of formaldehyde to phenol in PF did not have a significant impact on the retention rate of HH-based adhesives. When the retention rates of HH-based adhesives were compared to those of conventional wood adhesive resins used for the production of wood-based panels extensively, HH-based adhesives formulated with 30 wt% PF showed lower retention rate than commercial urea-formaldehyde resin. However, when PF content was increased to 35 wt%, the retention rate greatly increased and approached to that of commercial melamine-urea-formaldehyde resin. Except for the results mentioned above, the analysis of economic feasibility suggests that HH-based adhesives can be used for the production of wood-based panels if HH is hydrolyzed in proper conditions and then the HH-based adhesives are formulated by the HH hydrolyzates with 35 wt% PF.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.317-323
• /
• 2011

Strain A-3, an amylase-producing bacteria, was isolated from coastal seawater near Daecheon in the Republic of Korea. It was seen to possess a single polar flagella and grow well, on ASW-YP agar plates, at temperatures of between $20-37^{\circ}C$. However, it grew more slowly at the temperatures of $15^{\circ}C$ and $40^{\circ}C$. Similarly, it was observed to grow abundantly, in an Artificial Sea Water-Yeast extract-Peptone (ASW-YP) liquid medium, in a pH range of 6-9, but not grow at pHs of 4-5 and a pH of 10. Strain A-3 was noted as being close to Pseudoalteromonas phenolica O-$BC30^T$, Pseudoalteromonas luteoviolacea $NCIMB1893^T$, Pseudoalteromonas rubra $ATCC29570^T$, and Pseudoalteromonas byunsanensis $FR1199^T$, with 98.30%, 97.86%, 97.78%, and 97.25% similarities respectively, in its 16S rRNA sequence. A phylogenetic tree revealed that strain A-3 and P. phenolica O-$BC30^T$ belong to a clade. However, strain A-3 differed from P. phenolica O-$BC30^T$ in relation to a number of physiological characteristics. Strain A-3 exhibited no growth above 5% NaCl concentrations, no utilization of D-glucose, D-mannose, D-maltose, or D-melibose, and no lipase (C-14) activity. All of these properties strongly indicate that strain A-3 is distant from P. phenolica O-$BC30^T$ and thus led us to name it Pseudoalteromonas sp. A-3. Pseudoalteromonas sp. A-3 produces ${\alpha}$-amylase throughout growth. Maximal amylase activities of 144.48 U/mL and 149.20 U/mL were seen at pH 7.0 and $37^{\circ}C$, respectively. Pseudoalteromonas sp. A-3's high, stable production of ${\alpha}$-amylase in addition to its biochemical features, such as alkalitolerance, suggest that it is a good candidate for industrial applications.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.314-320
• /
• 2014

The uptake and transportation patterns of the residual boscalid and chlorfenapyr were investigated from the soils to Korean cabbages. The recovery rates of the pesticides spiked in the soils and Korean cabbages were 87.5 to 105.2%. Korean cabbages were cultivated in soils treated with two different concentrations of the pesticides as low (3.0 mg/kg) and high (6.0 mg/kg) concentrations in greenhouse for 28 days. The initial level of boscalid was determined as 2.77 and 5.66 mg/kg for the low and high concentration of boscalid-treated soils, respectively. After 28 days of treatment, the residual boscalid in soils decreased to 0.53 and 1.60 mg/kg for the low and high concentration of boscalid-treated soils, respectively, and thus it was reduced to 71.7 to 81.9%. The initial level of chlorfenapyr was determined as 2.38 and 6.43 mg/kg for the low and high concentration of chlorfenapyr-treated soils, respectively. After 28 days of treatment, the residual chlorfenapyr in soils decreased to 1.36 and 2.91 mg/kg for the low and high concentration-treated soils, respectively, and thus it was reduced to 42.9 to 54.8%. The residual pesticide analysis was done with 2 day intervals from 21 days-cultivated Korean cabbages after seeding. Uptake rates of boscalid from the soil to Korean cabbages were 2.4 and 2.2% for the low- and high-concentration of boscalid-treated soil, respectively. However, the uptake rate of chlorfenapyr by the cabbages was 1.5 and 1.3% for the low and high concentration-treated soil, respectively. The uptake rate of chlorfenapyr by the cabbages was lower than that of boscalid. These results showed that the residual pesticides in soil could be absorbed by Korean cabbages depending on their physicochemical properties.