• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.221-227
• /
• 2019

One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.468-468
• /
• 2011

Carbon nanotubes (CNTs) have been considered as one of the promising candidate for next-generation field emitters because of their unique properties, such as high field enhancement factor, good mechanical strength, and excellent chemical stability. So far, a lot of researchers have been interested in field emission properties of CNT itself. However, it is necessary to study proper field emitter shapes, as well as the fundamental properties of CNTs, to apply CNTs to real devices. For example, specific applications, such as x-ray sources, e-beam sources, and microwave amplifiers, need to get a focused electron beam from the field emitters. If we use planar-typed CNT emitters, it will need several focal lenses to reduce a size of electron beam. On the other hand, the point-typed CNT emitters can be an effective way to get a focused electron beam using a simple technique. Here, we introduce a fabrication of CNT fibers with nanoscale point tips which can be used as a point-typed emitter. The emitter made by the CNT fibers showed very low turn-on electric field, high current density, and large enhancement factor. In addition, it showed stable emission current during long operation period. The high performance of CNT point emitter indicated the potential e-beam source candidate for the applications requiring small electron beam size.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.462-470
• /
• 2014

Objectives: The purpose of this study was to evaluate quartz concentrations in airborne respirable dust and particle size-related quartz concentrations. Methods: Respirable dust samples were collected using a 10 mm Dorr-Oliver nylon cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. Dust samples were collected with a Marple's personal cascade impactor from stone grinding operations in five stone-related business located in the Gyeongsangbuk-do area. Results: The geometric mean of quartz concentration in the respirable dust was $0.170mg/m^3$, and the rate of exceeding the Korean Occupational Exposure Limit(KOEL) was 93.3%. The quartz concentration by particle size shows that it was the highest($0.115mg/m^3$) in stage 5($3.50-6.00{\mu}m$), which corresponds with the size of respirable particle. The smaller the particle sizes were, the higher quartz the content became. The mass fractions of inhalable, thoracic, and respirable dust were 72.1%, 36.0%, and 14.4%. Conclusions: The rate of the quartz concentration in respirable dust from stone grinding operations exceeding the American Conference of Governmental Industrial Hygienists Threshold Limit Values was 100%, which means proper work environmental management is required through regular working environmental measurements. Given that the stone grinding operations had a higher small size dust concentrations, there is a need to reduce respirable dust, such as through wet operation and local exhaust ventilation.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.383-392
• /
• 2016

This paper proposes the design considerations of resonant network and transformer magnetics for 500 kHz high switching frequency LLC resonant converter. The high power density can be effectively achieved by adopting high switching frequency which allows small size passive components in the converter. The design methodology of magnetizing inductance is derived for zero voltage switching (ZVS) condition, and the design methodology of the transformer and output capacitance is derived to achieve high power density at high operating frequency. Moreover, the structure of transformer is analyzed to obtain the proper inductance value for high switching operation. To verify the proposed design methodology, simulation and experimental results will be presented including temperature of passive and active components, and power conversion efficiency to evaluate dominant power loss. In addition, the validity of magnetics design will be evaluated with operating waveforms of the prototype converter.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.65-68
• /
• 2003

3GPP's RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In 3GPP ARQ, distinctive windows are provide at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at reordering buffer, which results in a long reordering time. Aiming at suppressing the occupancy at reordering buffer, we propose a occupancy control scheme in this paper. In this scheme, a threshold is created in the receiving station's window and a data PDU out of the threshold (but within the window) is treated according to go back N ARQ. By the employment of the occupancy control scheme, the occupancy at the reordering buffer is apparently reduced, while the delay performance may be degraded due to the properties of go back N ARQ. We, thus, investigate the peak occupancy and mean delay performance by a simulation method. From numerical examples, we observe a trade-off in both performance measures and conclude that the peak occupancy is effectively reduced by setting a proper threshold under a constraint on mean delay performance.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.221-230
• /
• 2020

In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3 bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/㎥ of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.

• Journal of Mechanical Science and Technology
• /
• v.20 no.6
• /
• pp.864-873
• /
• 2006

As fuel cells approach commercialization, hydrogen production becomes a critical step in the overall energy conversion pathway. Reforming is a process that produces a hydrogen-rich gas from hydrocarbon fuels. Hydrogen production via autothermal reforming (ATR) is particularly attractive for applications that demand a quick start-up and response time in a compact size. However, further research is required to optimize the performance of autothermal reformers and accurate models of reactor performance must be developed and validated. The design includes the requirement of accommodating a wide range of experimental set ups. Factors considered in the design of the reformer are capability to use multiple fuels, ability to vary stoichiometry, precise temperature and pressure control, implementation of enhancement methods, capability to implement variable catalyst positions and catalyst arrangement, ability to monitor and change reactant mixing, and proper implementation of data acquisition. A model of the system was first developed in order to calculate flowrates, heating, space velocity, and other important parameters needed to select the hardware that comprises the reformer. Predicted performance will be compared to actual data once the reformer construction is completed. This comparison will quantify the accuracy of the model and should point to areas where further model development is required. The end result will be a research tool that allows engineers to optimize hydrogen production via autothermal reformation.

• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.265-274
• /
• 2011

The objective of this case study is to analyze how effectively KIA K5, which is a leading mid-size car brand, has positioned itself into the mid-size car market. Before KIA launched the K5, Sonata and SM5 were the leading brands in the mid-size car market. They had loyal customers who like their similar images. As many competitors keep launching new brands or new designs into the car industry, Sonata and SM5 were pressured to introduce new versions. But, the YF Sonata and the New SM5 failed to catch up with the new trends in the market. Whilst YF Sonata was perceived as too innovative, the New SM5 was treated as an old car by the target customers of the mid-size car. While the two leading brands struggled to attract customers, KIA K5 found a new market space by identifying and focusing on the lucrative replace and up-grade demand segment and filling the gap between the current product category values and the emerging mid-size car category values. The K5 found the right values that customers need and successfully articulated the values to the customers. This case study illustrates that a successful positioning strategy can be effectively employed to attract customers in the saturated car manufacturing industry. This case can be summarized as the successful positioning strategy of KIA K5 is comprised of four primary pillars: design innovation, market analysis, STP (segmentation, targeting, and positioning), and launch strategy. The KIA K5 case study provides valuable insights and implications for many other companies that are planning to find a proper positioning strategy for their own business.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2016

Ex-situ catalytic pyrolysis of a Korean native oak tree over microporous zeolites (HZSM-5, HBeta, and HY) was performed by using a fixed bed reactor. The effect of sample to catalyst ratio and reaction temperature was also investigated to optimize production conditions of high quality bio-oil. Among three catalysts, HZSM-5 showed the highest aromatic formation due to its proper pore size and strong acidity. Although HY and HBeta also showed the catalytic activity, they produced larger amounts of coke due to their larger pore size. The smaller ratio of the sample to the catalyst and higher reaction temperature were also required to maximize the yields of aromatic hydrocarbons via the catalytic pyrolysis of oak tree over HZSM-5.

• Korean Journal of Community Nutrition
• /
• v.18 no.4
• /
• pp.333-343
• /
• 2013

It is important to prepare and execute the menu plan for proper and balanced intake of nutrients in the adolescence. This study investigated the new approach for planning menu by ordinary meal pattern based on cooked foods groups. The amounts of cooked foods in the menu plan assumed to be single serving size. The middle school second graders participated for the study. A total of 313 questionnaires were analyzed using CAN-pro 3.0 and SPSS WIN 12.0 program. The average content of energy in the menu plan was 2,453 kcal, the average ratios of energy contribution by carbohydrate, protein and fat were 54.3%, 17.9%, 27.8%, respectively. A total of 56.9% menu plans (94.9% of male and 8.7% of female students') were below the lowest limit of optimum carbohydrate energy ratio of 55%. A total of 29.1% menu plans (33.1% of male and 23.9% of female students') were exceed the highest limit of optimum fat energy ratio of 30%. The NAR of minerals and vitamins were all 1.0 except for calcium (0.92) and folate (0.88). When INQ of the individual cooked food groups were calculated, kimch was the highest in all minerals and vitamins examined, suggesting that kimch may be the best source for all minerals and vitamins, including calcium and folate with the minimum change in energy content. In conclusion, the menu plan by ordinary meal pattern in this study was low in carbohydrate, high in fat, and contained enough minerals and vitamins except for calcium and folate for middle school students.