• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.429-435
• /
• 2010

Objectives: The aim of this study was to investigate average working lengths of Korean posterior teeth and evaluate validity of endodontic file length. Materials and Methods: The endodontic working length of the posterior teeth of 670 Korean patients were measured than each mean value and standard deviation were investigated than the frequency deviation and standard deviation per each length were calculated. Results: Among the canals of premolar, 66.5% of canal length was marked under 20 mm by endodontic working length and 95.4% could be measured under 22 mm and Among the canals of molars, 95.5% of canal length was marked under 20 mm endodontic working length. Conclusions: With the result of measurement of endodontic working length of premolars of Korean, it suggested that 23 mm endodontic file is more proper than the 21 mm and 25 mm file on the market.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.44-54
• /
• 2022

Without proper treatment on the multiple tooth missing area, the lack of posterior support and the supra-eruption of the teeth cause many severe complications of occlusion, vertical dimension and masticatory function. This report is a case of full-mouth rehabilitation of a patient with loss of posterior support and collapsed occlusion due to missing teeth area left untreated for a long time. The patient who is 68-year old male patient had some teeth fallen out while removing his old maxillary denture and was complaining about pain in the region of anterior teeth due to traumatic contact. The vertical dimension was corrected by 4 mm from the top cervical point of the canine through various evaluations and the edentulous area was treated with the implant fixed prostheses through computer guided implant surgery based on the diagnosis and treatment plan for definitive prostheses supported by computed tomography (CT) data analysis and CAD-CAM (Computer-aided design/computer-aided manufacturing) technique. After full mouth rehabilitation, the patient was very satisfied with remarkable improvements in mastication, function, and aesthetics.

• Journal of the Korean Home Economics Association
• /
• v.43 no.10 s.212
• /
• pp.179-190
• /
• 2005

The purpose of this study was to apply the three dimensional Replica method to the fabrication of dress forms of plus-sized women to attain proper ease through draping and based on the ease to develop good torso patterns with superior fit. The results were as follows. The physical characteristics of the dress forms of plus-sized women were divided into two: Types I and 11. The proper ease was calculated through draping using dummies of each somatotype and appropriate torso patterns were developed. The differences of the types for each pattern were as follows. The bust girth ease of Type II was 6cm as for Type I. As for the bust breadth 1.0cm was added to the anterior chest width, the armpit width was the actual measurement plus 0.5cm, and the back breadth was the posterior chest width plus 2.5cm. The bust breadth was smaller and the back breadth was bigger that those of Type I after improving the bust and back fit. The bust of Type I protrudes outwards relatively and so the shoulder dart of front-side of Type I was 1.2cm bigger than that of Type II which improved the bust region fit. Considering the characteristics of the protruding abdominal region the front- side waistline of type II was assigned W/4+3.5cm and the back-side waistline W/4cm, so that the sidelines divided the front and back properly. It was drafted so that the center-front became diagonal, thereby improving the middle-hip girth fit.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.67-74
• /
• 2008

Repetitive overhead throwing exerts significant mechanical stress on the elbow joint. Pitching in baseball, serving in tennis, spiking in volleyball, passing in American football and launching in javelin-throwing can all produce elbow pathology by forceful valgus stress, with medial stretching, lateral compression and posterior impingement. This stress can lead to developmental anatomic changes in the young thrower. Asymptomatic pathology in the shoulder and elbow joint is prevalent and, with overuse, can progress to disabling injury. Joint injury occurs as a result of the body's inability to properly coordinate motion segments during the pitching delivery, leading to further structural damage. The implications of acute and overuse injuries and the possibility of permanent damage should be understood by parents, coaches and the athletes. Proper understanding of the intrinsic and extrinsic risk factors that could lead to elbow injuries is thus required. Measures to prevent elbow injuries should include proper coaching, warm-up, medical expertise and protective gear. Injury prevention and rehabilitation should center on optimizing pitching mechanics, core strength, scapular control, and joint range of motion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.282-288
• /
• 2010

Surgery with the computer navigation system can make it possible to identify important anatomical structures which are difficult to be confirmed with the naked eye in the operation, and has extended their applications in various surgical fields. The head and neck surgery especially requires detailed anatomical knowledges and these knowledges have influences on postoperative functions and esthetics of a patient. In the orthognathic surgery, we should take osteotomies in the precise locations of the jawbones and move segments to the intended positions. There are so many important anatomical structures around the osteotomy-sites in the orthognathic surgery that the prevention of damage to these structures to obtain satisfactory results without any complication. There are vessels of the pterygoid plexus posterior to the pterygoid plate in the maxilla and the mandibular nerve enters the mandibluar foramen in the mandibular ramus. These locations should be confirmed perioperatively to avoid any injury to these structures. The navigation-assisted surgery may be helpful for this purpose. We performed navigational orthognathic surgeries with preoperative CT images and obtained satisfactory results. The osteotomy was performed in the proper location and damaging the surrounding important anatomical structures was avoided by keeping the saw away from them with the real-time navigation. It may be required to develop proper devices and protocols for the navigation-assisted orthognathic surgery.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.99-107
• /
• 1991

The purpose of this study was to decide the proper projection angle that could avoid the superimposition of the petrous portion of temporal bone and posterior clinoid process in cephalometric lateral and basal view of the 10 dry skulls and to analyze the reproducibility of a modified Accurad-100 head holder device from Denar Co. and a cephalostat head holder in 30 transcranial radiographs of the dry skull. The results were obtained as follows: The vertical angle was 24.5±4.1° and the horizontal angle was 3.0 ±5.7°. The distances between arbitrary 3 points which were on the TMJ area were as follows: AB 16.76±0.27㎜, BC 8.79±0.18㎜ in the transcranial radiographs using modified Accurad-100 head holder, AB 29.03±0.14㎜, AC 19.95±0.24㎜, BC 10.08±0.07㎜ in the transcranial radiographs using cephalostat.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.221-225
• /
• 2013

Proper management of provisional prosthesis is key to success in prosthodontics. Provisional restoration on maxillary anterior missing area frequently come across a incident of falling off especially in patients with long span pontics and oval arch shape. This is because maxillary anterior teeth are more exposed to horizontal force than the posterior teeth and additional anterior cantilever effect will negatively affect to the retention of provisional prosthesis. Beside that maxillary anterior provisional prosthesis should provide proper incisal guidance during the mandibular functional movements. However occlusal contacts on the prosthesis in maximum intercuspal position are located on opposite side of fulcrum line of prosthesis which will cause removing force against the provisional prosthesis. This case report present that provisional implant prevent pre-described harmful effect on maxillary anterior fixed provisional prosthesis and provide comfort and satisfactory result during post-extraction healing period.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.273-278
• /
• 2011

Purpose: It has always been an aspiration for Asians to look more balanced and feminine, considering their facial features regarding relatively flat midface with marked prominences of the zygoma. Many studies have been dealt in this subject. However, the authors would like to emphasize the concept and introduce the technique of repositioning of the malar complex to a cosmetically beneficial point and stationing it on proper position by fixation on zygoma body and arch. Methods: From January 1998 to December 2007, this method was performed in 50 patients of mild to moderate prominence and malposition of the malar complex. A simplified technique of lateral orbital osteotomy and oblique osteotomy on zygomatic arch through intraoral and preauricular incision was developed. Then, liberal malar complex can be moved to a supero-posterior direction and repositioned to a more cosmetically beneficial point. To maintain the stationed position and to protect from vector affected by the attached masticating muscle to zygomatc bone, fixation was done on both zygoma body and arch. Results: We have obtained satisfactory results using this procedure without any observable complications. The advantages of this procedure are proper exposure, inconspicuous scar, safe, more natural contour, improved stability, and shorter healing time. Conclusion: The authors suggest that reduction malarplasty should be approached with underlying concept of repositioning and fixation. In mild moderate malar prominent cases, our technique will provide with maintenance of aesthetic concept, equal to the malar reduction performed under coronal approach and provide with more natural facial contour with stability even with less invasive surgical approach.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.165-177
• /
• 1993

Upper canine is important because it protects and maintains the stability of the dental arch and also, joins the anterior with the posterior teeth. The incidence of impaction of upper canine is the second most frequent next to the third molar because it takes a long period of time to develop, and has a complicated path of eruption, and erupts lately. After the age of 10, clinical and radioglaphic examination can be used in revealing the possibility of impaction and efforts should be put to reduce the side effects. To prevent impaction, selective extraction of primary canine at the age of 8 to 9 could be considered and prolonged retention of primary canine in oral cavity should be avoided at this time. Once the impaction is iden, the first stage of the treatment is to lcocalize the lesion by radiographic examination and According to the severity, orthodontic traction or autotransplantation should be considered and comprehensive diagnosis and treatment plan of malocclusion should be established. Generally, labial impaction is due to arch length discrepancy and palatal impaction is due to malposition or morphologic pathosis of lateral incisors rather than arch length discrepancy. In surgical procedure, peridontal problems should be considered and the minimum amount of bone and soft tissue should be reduced and direct bonding method of many attachment methods should be recommended. Especially in traction of labially impacted canine, it should be guided to erupt through the keratinized zone and proper forced magnitude should be applied. The importance of periodontal condition should always be in mind following the patient education to mintain the good oral hygiene at each stage of treatment. Properly managed impacted canine can provide function and esthetic by proper diagnosis and treatment if extraction of canine is not indicated.