• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1805-1810
• /
• 2012

모바일 기기들이 급속도로 소비자들에게 확산됨에 따라 위치정보를 이용한 다양한 서비스들이 등장하고 있다. 위치를 자동적으로 파악하여 관련 정보를 제공하는 서비스를 위치기반 서비스(LBS: Location-Based Service)라고 지칭한다. 본 논문에서는 미리 등록된 학생의 이동경로와 유해업소를 학생용 데이터베이스에 저장한 후, 스마트폰의 위치 기반 서비스를 이용하여 학생의 동선을 파악하되 경로를 이탈하는 정도와 유해업소를 출입하거나 우범지역에 머무르는 경우를 파악하여, 데이터베이스와 비교함으로써 사전에 청소년윤리지도가 이루어질 수 있도록 방법을 제시한다.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.766-771
• /
• 2006

Railway stations are important facilities for transport of passengers and freights. The location of station have an effect on the efficiency of railway transport and operation. In this study, an inspection of the primary factors for station spacing in urban railway has been performed and a review for the propriety of the present states and further improvement has been carried. It may be helpful for proper decisions on the route planning in urban railway. Primary factors for station spacing are 1)train capacity, 2)competitiveness with other transportation, 3)accessibility and 4)construction cost, which is out of consideration in the inspection. From the result of this study, the proper station spacing is about 600m for the accessibility, more over 1.03km for the train capacity and more over 1.4km for the competitiveness with other transportation.

• 한국주거학회논문집
• /
• 제16권6호
• /
• pp.39-46
• /
• 2005

This Study is to analyse the community-consciousness depending on the location type of the neighborhood facility in apartment complex, in order to set up the fundamental criteria for the location type which can increase the community-consciousness. For the purpose of this study, Shopping center, Playground and Resting Area are selected among the neighborhood facilities and they were analysed on the basis of the Belonging-Sense, Affection-sense and the personnel Interchange. The results of this study are as follows: Shopping center should be located in the Main-Enterance of Apartment Complex and be constructed as low building along the street. In case of the Playground that was compared with the Central type and Decentral type, the Central type is proper for the increasing of community-consciousness. In case of the Resting Area that was compared with the Mixture type involving a playground and Independent type except for a playground, the independent type is acceptable for the location-type to increase the community-consciousness owing to all analyses.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.377-388
• /
• 2014

There have been a lot of studies about overseas factory location in order to meet various needs of industries according to the international economic developments. However, most of the studies were written about generic theory for general industries or mainly concerned to high capital industries. This study is focusing on the sewing and apparel industries which represent labor intensive and small-medium type of enterprises. For this study, AHP(Analytic Hierarchy Process) methods were applied to make proper analysis after wide range of survey to clarify determinants which provide a guidance for overseas factory location. As a result of the analytical researches done in the thesis the most important which should be taken consideration while determining of overseas factory location for sewing and apparel products industry are as follows - economic factors(0.569), geographic factors(0.171), social and cultural factors(0.157), regulations and institutional factors(0.103). In the last, S company is examined for example to show how this determinants have practically been applied.

• 정보처리학회논문지B
• /
• 제12B권2호
• /
• pp.109-114
• /
• 2005

생체(biometric) 정보를 이용한 사용자 인중 기술에 대한 관심이 고조되고 있으며, 이 중에서 얼굴인식은 비접촉이라는 장점 때문에 최근 생체인식 분야에서 연구가 활발한 분야 중에 하나이다. 본 논문에서는 얼굴인식의 선행작업인 얼굴검출단계에서 효과적으로 눈위치를 추출하는 방법을 제안한다. 눈 위치 추출을 위하여 영상에 대한 이진화를 반복적 임계치 설정 방법을 통하여 수행하며, 눈의 특성 강화를 위한 가우시안 필터를 사용하여 눈의 위치를 추출하고, 상관관계를 이용하여 추출된 눈의 위치에 대한 검증 단계를 거친다. 논문에서 제안한 눈 위치 추출은 정확도뿐만 아니라, 온라인 시스템에 적용 가능하도록 고려하였고, 온라인 시스템에 적용한 결과 만족할 만한 성능을 보였다.

• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.349-358
• /
• 2012

Over a wireless sensor network (WSN), accurate localization of sensor nodes is an important factor in enhancing the association between location information and sensory data. There are many research works on the development of a localization algorithm over three-dimensional (3D) space. Recently, the complexity-reduced 3D trilateration localization approach (COLA), simplifying the 3D computational overhead to 2D trilateration, was proposed. The method provides proper accuracy of location, but it has a high computational cost. Considering practical applications over resource constrained devices, it is necessary to strike a balance between accuracy and computational cost. In this paper, we present a novel 3D localization method based on the received signal strength indicator (RSSI) values of four anchor nodes, which are deployed in the initial setup process. This method provides accurate location estimation results with a reduced computational cost and a smaller number of anchor nodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.443-445
• /
• 2000

This paper describes the assessment of proper location of lightning arrester in combined transmission line which is connected with overhead line and underground cable. The modeling for simulation is established using the actual system in ATP Draw and EMTP. Simulation is carried out to find out the best point to install the arrester in given the model system. And also voltage and current is analyzed on cable covering protection unit(CCPU). The simulation result demonstrated the best location of arrester in the given transmission line through the detailed analysis and its assessment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1302-1304
• /
• 1999

This Paper Proposes the FACTS site selection method using subtransmission system reduction. A general method which uses the sensitivity of the variation in voltage and reactive Power has been used to determine the location of shunt type FACTS device, but there is a difficulty to find a proper location due to the overestimation of the effect of sub-transmission systems. Therefore, there is a need to reduce sub-transmission system for finding an effective location of shunt type FACTS devices such as SVC(Static Var Compensator), STATCOM(Static Synchronous Compesator), and so on.

• 대한산업공학회지
• /
• 제23권2호
• /
• pp.385-401
• /
• 1997

In this paper, we evaluate the performance of zone-based registration and distance-based registration. First, we propose the mobility model which can be used to analyze the performance of both zone-based registration and distance-based registration. And using the proposed mobility model, we obtain several performance measures and perform numerical computation to compare the performance of two registration methods. Numerical results show that in general zone-based registration needs less number of registration than distance-based registration. On the other hand, if distance-based registration is used, registration load is equally distributed to all cells in a location area and ping-pong phenomenon is not occurred. And when a VLR area is composed of a few location areas, distance-based registration may need less registration load than zone-based registration. Therefore, a proper registration method should be selected considering system circumstances and implementation complexity, and the selected method should be implemented so as to change system parameters according to system circumstances.

• 산업기술연구
• /
• 제9권
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.