• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.892-898
• /
• 2013

A field emission projection microscope was constructed to investigate the atomic and chemical-bonding structure of molecules using electron in-line holography. Fringes of carbon nanotube images were found to be interferograms equivalent to those created by the electron biprism in conventional electron microscopy. By exploiting carbon nanotubes as the filament of the electron biprism, we measured the transverse coherence length of the electron beam from tungsten field emitters. The measurements revealed that a partially coherent electron-beam was emitted from a finite area.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.65-72
• /
• 2002

Generally, there are laser operating equipments( aligner, stepper) and electronic microscope( SEM, TEM) as a high precision manufacturing and inspection equipment in semiconductor production companies, precision examination and measuring laboratories. Mostly, these equipments are characterized by projection and target part. The relative displacements between projection and target part are dominant roles in vibrational problem in these precision equipments. These relative displacements are determined by the position of incoming vibration and the difference of vibration response in projection and target part. In this study, the allowable vibrational limits are suggested and the vibrational reduction plans are proposed by measurement and analysis of vibration phenomenon in the Clean Room in PDP(plasma display panel) production building. The vibration performance is evaluated by comparison relative displacements between projection and target part before/after the vibration isolation plan.

• Applied Microscopy
• /
• 제35권4호
• /
• pp.98-104
• /
• 2005

초고전압 투과전자현미경 (HVEM)에 장착된 postcolumn 방식의 HV-GIF (high voltage gatan image filter)의 영상기록 장치인 HV-MSC (high voltage multi-scan CCD, $1024{\times}1024$픽셀) 카메라의 결상영역은 현미경 최소 관찰 배율인 2,000배에서 $0.43{\mu}m^2$로서 동일 배율에서 필름 기록영역($2000{\mu}m^2$)에 비해 약 0.02%에 해당하는 매우 적은 영역이다. 이러한 결상 영역 제한성을 개선하고자 투사렌즈 전류조절 기법을 도입하였으며 본 연구의 결과로 HV-MSC의 결상영역은 $112{\mu}m^2$로 비약적으로 증가하였다. 이는 약 8,800배에서 필름으로 기록할 수 있는 영역과 동일하였다. 이와 더불어 투사렌즈 조절에 따른 이미지 변형정도를 약 5%이하까지 허용하고 8,800배 이상에서 필름 기록영역과 동일한 HV-MSC 결상영역을 확보할 수 있는 실험적인 참조곡선을 고안하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.

• Animal Systematics, Evolution and Diversity
• /
• 제33권1호
• /
• pp.26-32
• /
• 2017

A new marine tardigrade species of the genus Orzeliscus belonging to the family Halechiniscidae is described from the sea coasts of Korea and Japan. This new species is most characterized in having slender, pole-shaped clava with uniform breadth along its whole length. Furthermore, it evidently differs from the congeners by the combination of characters of a hemispherical protrusion on cheek region of the head, a big and bulbous lateral projection between leg III and leg IV, and an elongate papillus terminating with a minute tube on leg IV. 'Orzeliscus cf. belopus' sensu McKirdy, Schmidt and McGinty-Bayly, 1976 from the Galapagos Islands quite resembles this new species in sharing the slender, pole-shaped clava. However, these two Pacific populations are distinguished to each other by body size and shapes of the protrusion on cheek region and the lateral projection between leg III and leg IV. Scanning electron microscope photographs and a key to species of the genus Orzeliscus are also provided herein.

• 생명과학회지
• /
• 제9권6호
• /
• pp.709-714
• /
• 1999

성층 초파리의 단안 신경계를 미세형태학적으로 연구 하였다. 단안은 수용기말단, 개재신경 그리고 신경교세포의 3종류로 구성되어 있다. 이들은 전자현미경 사진상에서 각기 다른 밝기를 보여주고 있으므로 쉽게 구분이 가능했다. 신경교세포 내에는 조면소포체가 풍부하게 존재하고, 수용기 말단과 개재신경내에는 신경세포에서 물질의 이동 통로인 미소관이 다수 관찰되었다, 수용기말단과 신경교세포를 연결해주는 capital projection이라는 인상적인 구조물이 관찰된다. 수용기 말단과 개재신경의 시냅스 활성부에 존재하는 리본모양의 구조물과 이들 주위에 모여있는 시냅스 소포들이 자주 관찰되었다. 그리고 단안 시신경이 최종적으로 집중되어 뇌로 신호를 전달해 주는 거대개재신경(giant interneuron)의 횡단 구조를 관찰 할 수 있었다.

• Composites Research
• /
• 제23권5호
• /
• pp.30-38
• /
• 2010

성형조건에 따른 GMT-Sheet를 관찰하여, 성형품 표면의 불량원인을 조사했다. 현미경 관찰 결과, GMT-Sheet 성형품의 표면에서 구정, 섬유돌출, 크랙, 섬유노출, 마이크로 웰드라인, 핀홀, 여파굴곡곡선 등의 결함을 발견했다. 이 결함들은 요철의 발생원인이고, 표면 광택에 영향을 주는 현상이다. 그리고 표면거칠기에 영향을 주는 요철의 가장 주요한 발생원인은 보압 냉각 과정에서 발생하는 모재의 수축이었다. 성형 시의 보압하중이 높을수록 GMT-Sheet 성형품 표면은 좋아졌다. 또한 서냉실험에서는 탈형온도가 낮을수록 성형품의 표면이 좋아졌다.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.1-10
• /
• 2016

The use of materials for modern lightweight auto-bodies is becoming more complex than hitherto assemblies. The high strength materials nowadays frequently used for more specific fields such as the front and rear sub frames, seat belts and seats are mounted to the assembled body structure using bolt joints. It is desirable to use nuts attached to the assembled sheets by projection welding to decrease the number of loose parts which improves the quality. In this study, nut projection welding was carried out between a nut of both boron steel and carbon steel and ultra-high strength hot-stamped steel sheets. Then, the joints were characterized by optical and scanning electron microscope. The mechanical properties of the joints were evaluated by microhardness measurements and pullout tests. An indigenously designed sample fixture set-up was used for the pull-out tests to induce a tensile load in the weld. The fractography analysis revealed the dominant interfacial fracture between boron steel nut weld which is related to the shrinkage cavity and small size fusion zone. A non-interfacial fracture was observed in carbon steel nut weld, the lower hardness of HAZ caused the initiation of failure and allowed the pull-out failure which have higher in tensile strengths and superior weldability. Hence, the fracture load and failure mode characteristics can be considered as an indication of the weldability of materials in nut projection welding.

• 한국동물학회지
• /
• 제33권1호
• /
• pp.28-34
• /
• 1990

배추흰나비에서 좌측 촉각을 제거한지 1일 또는 2일후 뇌의 좌측배엽을 전자현미경으로 관찰하여 촉각으 촉각지각신경세포가 배엽에 종지하는지를 조사하였다. 촉각지각신경세포는 촉각제거로 받은 큰 손상으로 말미암아 배엽에서는 그 축색종말에 전자밀도가 낮거나, 중등도이거나 또는 높은 퇴행성변화를 나타내었다. 그러므로 뇌로 뻗은 촉각지각신경세포중 일부는 촉각 바로 뒤에 있는 배엽에 종지한다고 결론되었다.