• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.601-615
• /
• 2001

The study area. Boeun-eup Boeun-kun, belongs to Ogchon metamorphic belt which is highly metamorphosed and consisted of complex geologic formations. Even though the geological structures and formations are complex and metamorphosed, the geological investigation and consideration are not enough and consequently the plane failure is occurred in the rock slope which was under construction on 1 : 0.5 gradient. This area is assessed as unstable and additional failure is possible by the discontinuity with same direction of failure surface. Therefore, the authors evaluate the slope stability using various analysis methods such as SMR, stereographic projection method, and the limit equilibrium analysis. In order to analyze stress redistribution and nonlinear displacement behavior caused by stress release, the authors conduct numerical analysis with UDEC and then the behavior of rock mass is analyzed after reinforcements are applied.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.27-31
• /
• 2013

To engrave high-density circuit-line patterns in IC substrates, we applied a projection ablation technique in which a dielectric ($ZrO_2/SiO_2$) mask, a DPSS UV laser instead of an excimer laser, a refractive beam shaping optics and a galvo scanner are used. The line/space dimension of line patterns of the dielectric mask is $10{\mu}m/10{\mu}m$. Using a ${\pi}$ -shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam; and a telecentric f-${\theta}$ lens focuses it to a $115{\mu}m{\times}105{\mu}m$ flat-top beam on the mask. The galvo scanner before the f-${\theta}$ lens moves the beam across the scan area of $40mm{\times}40mm$. An 1:1 projection lens was used. Experiments showed that the widths of the engraved patterns in a buildup film ranges from $8.1{\mu}m$ to $10.2{\mu}m$ and the depths from $8.8{\mu}m$ to $11.7{\mu}m$. Results indicates that it is required to increase the projection ratio to enhance profiles of the engraved patterns.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1088-1095
• /
• 2009

In this paper, we describe the reorientation method of distorted road sign by using projection transformation for improving recognition rate of road sign. RSR (Road Sign Recognition) is one of the most important topics for implementing driver assistance in intelligent transportation systems using pattern recognition and vision technology. The RS (Road Sign) includes direction of road or place name, and intersection for obtaining the road information. We acquire input images from mounted camera on vehicle. However, the road signs are often appeared with rotation, skew, and distortion by perspective camera. In order to obtain the correct road sign overcoming these problems, projection transformation is used to transform from 4 points of image coordinate to 4 points of world coordinate. The 4 vertices points are obtained using the trajectory as the distance from the mass center to the boundary of the object. Then, the candidate areas of road sign are transformed from distorted image by using homography transformation matrix. Internal information of reoriented road signs is segmented with arrow and the corresponding indicated place name. Arrow area is the largest labeled one. Also, the number of group of place names equals to that of arrow heads. Characters of the road sign are segmented by using vertical and horizontal histograms, and each character is recognized by using SAD (Sum of Absolute Difference). From the experiments, the proposed method has shown the higher recognition results than the image without reorientation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.13-27
• /
• 2015

The purpose of this study is to understand the general process from textile design till fashion design and to understand the relation between the body structure by using the x-ray technique. The research method was to see background of the anatomic feature and human skeletal X-ray projection through historical aspect of publications, the Internet, and paper. In terms of production, in order to present a design that takes into account the unique silhouette of the human body without distorting the shape of the human skeleton, X-ray images that were reconstituted using a computer graphic tool (Photoshop CS) were reproduced into the fabric as intense images through the digital Textile Printing technique that is capable of expressing fine and delicate details, and applied into the design. An original design was developed that emphasized the impression of the human body being projected and the shape of the human skeleton realistically expressed in terms of silhouette and detail. The results are as follows: First, Body has a anatomic formative characteristic and its formativeness becomes as a great motive for the artistic expression and thereby it becomes more unique and available for new design expression. Second, Using the 'body frame' as the motive of the research, there's mainly tried to make an unique expression. Third, according to reconstructing human skeletal X-ray projection by using Adobe Photoshop CS2, it can be expressed strong and unique design. Forth, DTP which is being used as an essential technique, expresses the body frame realistically and being used the special type of functional product and silk. Likewise by discovering the diverse formativeness of our body frame and reflecting the sense of humanity into the pieces there's been able to make and develop an unique fashion design. I sincerely hope there is a hug progress in this research in this area.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.117-128
• /
• 2010

There are many researches related to a simulated shooting training system for replacing the real military and police shooting training. In this paper, we propose the point of impact from a simulated shooting target based on image processing instead of using a sensor based approach. The point of impact is extracted by analyzing the image extracted from the camera on the muzzle of a gun. The final shooting result is calculated by mapping the target and the coordinates of the point of impact. The recognition system is divided into recognizing the projection zone, extracting the point of impact on the projection zone, and calculating the shooting result from the point of impact. We find the vertices of the projection zone after converting the captured image to the binary image and extract the point of impact in it. We present the extracting process step by step and provide experiments to validate the results. The experiments show that exact vertices of the projection area and the point of impact are found and a conversion result for the final result is shown on the interface.

• Korean Journal of Health Education and Promotion
• /
• v.12 no.1
• /
• pp.22-46
• /
• 1995

This is an effort to project health care resources in need for the elderly in the future when advanced transportation systems would greatly reduce geographical accessibility to health care services for the rural elderly. Two areas, Kimhae and Chuncheon, were selected for the study. Projection of health professionals and health care institutions for the elderly were made based on the analysis for the morbidity and illness behavior reported to two data sources, National Survey for the Elderly in 1992 by Korea Institute for Health and Social Affairs and beneficiary data by Korea Medical Insurance Cooperation for those living in the study areas in 1992. Projected number of health professionals and health care institutions were estimated for each area under study in years of 2010 and 2030, with those in a Japanese being used as a standard. Policy implications were discussed.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.433-437
• /
• 1996

We have analyzed the content of the Korean stone star chart. Ch'on-Sang-Yul-Cha-Bun-Ya-Ji-Do(here-after Ch'on-Sang-Do). In the star map we have found 1468 stars, 4 more than the Chinese star catalog Bo-Chun-Ga. The four extra stars form a constellation, Jong Dae Boo. The map projection law used in the star chart is found to be the polar equtorial and equidistance projection. The linear distance of an object on Ch'on-Sang-Do from the center is linearly proportional to the north polar angular distance. We have found from a statistical analysis that most stars with declination lower than 50 are at positions representing the epoch of around the first century. On the other hand, stars near the north pole with declination higher than 50 are at the epoch of about 1300, which is close to the time the chart was engraved. This implies that the original Ko-Gu-Rye Dynasty's star chart has been revised by astronomers of Cho-Sun Dynasty. We have also shown that stars on Ch'on-Sang-Do are engraved in such a way that their area is linearly proportional to the visual magnitude.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1874-1884
• /
• 1996

In this paper, we proposed automatic searching algorithm of thresholding value using multilevel thresholding for face segmentation from input bust image effectively. The proposed algorithm extracted the thresholding value of brightness that is formed background region, face region and hair region without illumination, background and face size from input image. The statistical projection analysis project the brightness of multilevel thresholding image into horizontal and vertical direction and decide the thresholding value of face. And the algorithm extracted elliptical type block of face from input image in order to reduce the back ground region and hair region efficiently. The proposed algorithm can reduce searching area of feature extraction and processing time for face recognication.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2010

In this paper, we propose a web inspection system (WIS) for real-time detection of paper defects which can cause critical fractures during papermaking process. Our system incorporates high speed line-scan camera, lighting system, and detection algorithm to provide robust and precise detection of paper defects in real-time. Since edge defects are very crucial to the paper fractures, our system focuses on the edge region of the paper instead of inspecting the whole paper area. In our algorithm, image projection and sub-pixel operation are utilized to detect the edge defects precisely and connected component labeling and shape analysis techniques are adopted to extract various kinds of the region defects. Experimental results revealed that our web inspection system is very efficient for detecting paper defects during papermaking processes.