• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.137-140
• /
• 2005

Organic light emitting transistors (OLET) which are vertically combined with the organic static induction transistor (OSIT) and organic light emitting diode (OLED) are fabricated and the device characteristics are investigated. High luminance modulations by relatively low gate voltages are obtained. In order to realize the flexible electronic circuits and displays, we have fabricated OSIT on plastic substrates. The OSIT fabricated on plastic substrate show almost same characteristics comparing with those of nonflexible OSIT on glass substrate. The OLET described here is a suitable element for flexible sheet displays.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.281-292
• /
• 2008

국내 LTPP(Long Term Pavement Performance) 연구에서 섬유보강 아스팔트 포장의 성능을 평가하기 위해, 국도 1호선 구간에 일반 아스팔트 포장과 섬유보강 아스팔트 포장을 각각 시공하였으며, 각각의 단면에 포장체 구조적 거동을 측정할 수 있는 계측센서를 매설하였다. 본 연구에서는 국내 LTPP구간에서 수행된 차량재하시험과 FWD시험의 결과를 바탕으로 섬유보강 아스팔트 포장의 구조적 성능을 평가하였다. 본 연구결과, 차량재하시험에서 섬유보강재를 사용할 경우 표층하단부의 변형률이 크게 저감되는 것을 확인하였다. 또한 일반 아스팔트 포장보다 응력중립축이 상승하여 일반 아스팔트포장은 중간층 하단에서 압축변형이 발생하는 반면에, 섬유보강 아스팔트포장은 중간층 하단에서 인장변형이 발생하였다. 반면 기층 하단부에서의 인장변형률은 두 포장형식 모두 큰 차이를 나타내지 않았다. FWD 시험에서도 섬유보강재를 사용할 경우 약 24% 정도 표면 처짐 량이 저감되는 것을 확인하였다. 이와 같은 결과를 종합하여 볼 때, 섬유보강 아스팔트 포장이 소성변형에 대한 저항성을 증진시킬 수 있다고 판단되며, 향후에 포장상태조사를 통해 장기포장공용성에 대한 연구가 수반되어야 할 것이다.

• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.615-624
• /
• 2003

The most accurate method to assess bone level is the histometric measurement. However it causes discomfort in patients and damage to the regenerated tissues. in the present study, we used 4 type regenerative therapies, The present study evaluated the clinical reliability and accuracy of bone probing measurements and radiographic bone level in the assessment of bone level by comparing those results with histometric confirmed bone level. Twentyfour(24) intrabony defects(4${\times}$4mm 1-wall intrabony defects) were surgically created in the mandibular second and fourth premolars of 6 beagle dogs. The control group underwent a conventional flap operation. Experimental group I was treated with calcium phosphate glass only, and while experimental group 2 was treated with GTR and experimental group 3 was treated with calcium phosphate glass and GTR. The subjects were sacrificed 8 weeks after the operation and a bone probing measurements, radiographic measurement and histometric measurement was performed. The correlation between bone probing measurements(BP) and histometric measurement(HL), and radiographic measurement(RL) and histometric measurement(HL) were analyzed with Spearman's rank correlation analysis and the statistical significance with respect to the type of regenerative therapies was analyzed with the Kruskal Wallis test. The coefficient of correlation to HL was 0.73 for RL and 0.90 for BP. The type of regenerative therapies had no significant effect on the difference between HL and other measurements. The results of this study suggests that bone probing measurements most closely represents actual bone level. So bone probing measurements may be a good clinical method for assessing the hone level following any type of periodontal regenerative therapies.

• 건축역사연구
• /
• 제27권5호
• /
• pp.17-26
• /
• 2018

In 1961, the Republic of Korea's first newly-constructed government building was completed. The government building, as ROK office, was erected as a twin with the USOM office in Sejong-ro. The reason why the ROK office and the USOM office were erected as a twin building is that the two offices were part of Foreign Operation Administration's Seoul Buildings Project in 1954. Within the project, the FOA office and the ROK office were rarely separated, and naturally, the ROK office was built according to the US standards. The planning, design, and construction phases which led by the US government were involved in the US architecture, engineering-construction companies. Because those AEC companies were familiar with the US technology and standards. In the phase of construction, Korean companies took part in the process under the supervise of Vinnell Corporation. The US expected to transfer its 'modern' and 'developed' technology through this process. The completed ROK office was widely known as the 'modern style (hyundae-sik)' building, which was body forth as glasses and new facilities. These factors were what the US emphasized for exporting architecture. The modifier, 'modern style (hyundae-sik)', given to the ROK office in the 1950s was a synonym for any new feeling that had never been seen hitherto. The newness of the ROK office, the 'modern style (hyundae-sik)' building, was specified as materials and facilities that indicates modern technology while in the absence of adequate knowledge.

• 한국실내디자인학회논문집
• /
• 제20권2호
• /
• pp.131-138
• /
• 2011

This study describes development process of residential architectural space in the Richard Meier's residential works through chronological analysis. By analyzing house layout, floor plan, elevation, materials and colors and light entering of his residential works, changes in his architectural space has been studied. Richard Meier's early work is designed as three-dimensional shape, and places emphasis on geometric form. However, recently completed residential works by Richard Meier focuses on the horizontal sun shading louvers, which has ability. In addition, teak and a special UV protective glass are used to control natural environment. Through this research, it was found that Richard Meier has maintained his architectural language in terms of the design layout of the house and planar with colors that appear on the initial project. Using light input methods and materials used for active development, it was found that many design elements were applied and developed.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.307-311
• /
• 2017

ZnO:Al thin films were deposited on glass substrate by RF magnetron sputtering followed by in situ heat treatment in the same chamber. Effects of in situ heat treatment on properties of ZnO:Al thin films were investigated in this study. As heat treatment temperature was increased, crystal quality was improved first and then it was deteriorated, surface roughness was decreased, and sheet resistance was also decreased. The decrease in sheet resistance was caused by increasing carrier concentration due to decreased surface roughness. The decrease in surface roughness resulted in increase of transmittance. Therefore, in situ heat treatment is an effective method for obtaining films with better electrical characteristics.

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.87-101
• /
• 2020

A multi-scale epoxy/CNT/fiberglass annular sector plate is studied in this paper in the view of determining nonlinear forced vibration characteristics. A 3D Mori-Tanaka model is employed for evaluating multi-scale material properties. Thus, all of glass fibers are assumed to have uni-direction alignment and CNTs have random diffusion. The geometry of annular sector plate can be described based on the open angle and the value of inner/outer radius. In order to solve governing equations and derive exact forced vibration curves for the multi-scale annular sector, Jacobi elliptic functions are used. Obtained results demonstrate the significance of CNT distribution, geometric nonlinearity, applied force, fiberglass volume, open angle and fiber directions on forced vibration characteristics of multi-scale annular sector plates.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.62-62
• /
• 2003

Charged particles can be accelerated to relativistic high energies by high power (＞ terawatt) laser beams. We have a research project on laser and plasma-based advanced accelerators in Center for Advanced Accelerators at Korea Electrotechnology Research Institute (KERI), in which the 2 TW (1.4 J／700 fs) Ti：sapphire／Nd：glass hybrid laser system and a He plasma will be used for particle acceleration experiments. In this presentation, we introduce the ongoing research activities and the planned experiments at KERI.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1272-1277
• /
• 2009

Since improved capacity for RC bridges has been required due to deterioration or increase in traffic, the deflection of cracked reinforced concrete slabs need to be reconsidered. Strengthening is known as the better way to improve capacity of bridges than reconstructing. In this paper, Fiber Reinforced Plastic (FRP) was introduced as one of the best strengthening methods for civil structures. The structures strengthened with FRPs can improve the strengthening capacity and serviceability. Therefore, CFRP sheet and Glass Fiber-Steel Composite Plate (GSP) in this research were used for strengthening slabs of RC bridges. Experimental data from the strengthening will be helpful to better understand the effect of the strengthening and effective flexural rigidity.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.665-668
• /
• 2012

본 논문에서는 스마트폰이나 태블릿 PC등의 매체에서 2차원 적으로 보이는 컨텐츠를 프로젝션 도구를 사용해서 3차원 입체영상으로 볼 수 있게 하는 연구를 했다. 이를 위해 4장의 브라운 유리를 피라미드 모양으로 구성했고, PC로부터 출력되는 4대의 LCD 모니터 화면을 역 피라미드 모양의 거울 4면으로 각각 프로젝션 시켜서 거울의 중심부에 3차원 입체 영상이 나타나게 시스템을 구성했다. 실험은 태블릿 PC와 서버측 PC(데스크탑 PC)를 무선으로 연동시켜, 태블릿 PC에서 선택한 콘텐츠가 서버측 PC에서 실행되어 역 피라미드형 거울의 중심부에 3차원 입체영상으로 보이게 했다. 실험결과 관찰자의 관찰 각도에 따라서 조금 차이가 나지만 2차원 컨텐츠를 3차원적으로 디스플레이 하는 것이 가능함을 보였다.