• 한국융합학회논문지
• /
• 제6권4호
• /
• pp.105-111
• /
• 2015

대부분의 소프트웨어 개발은 프로젝트 참여자들의 하드 스킬 능력 중심으로 판단되고 관리되고 운영된다. 그러나 현재의 소프트웨어 개발의 실패율은 매우 높다. 심리학의 발전으로 인간에 대한 탐험이 계속되면서 성격유형의 선호도가 업무의 선호도와도 연관이 있다는 연구가 활발히 이루어졌다. 심리유형론의 검사도구인 MBTI의 선호도는 ICT기술자들의 소프트웨어 개발주기에 맞춰진 업무의 선호도와 상관이 있음을 알게 되었다. 심리유형론과 소프트웨어 개발을 위한 소프트 스킬의 연관정보를 활용하면 소프트웨어 개발의 선호 공정을 이해할 수 있다. 본 논문에서는 ICT기술자들의 교육과 협업능력 향상 방안을 찾을 수 있도록 소프트웨어 개발 공정을 소프트스킬을 이용하여 성격유형별 분류가 가능하도록 프로그램을 개발하였다.

• Earthquakes and Structures
• /
• 제10권5호
• /
• pp.1089-1109
• /
• 2016

Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress-strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.

• Architectural research
• /
• 제16권2호
• /
• pp.37-44
• /
• 2014

Utilizing spaces for awareness could be superficially noble. However, the typology of spaces played an important role in addressing the awareness of translating the messages through tangible forms, which in this context are sculptures. Assuring the efficacy of the typology of the spaces that is compatible with the content is important to ensure its timelessness to the dynamic demographical change of viewers. Therefore, the study proposes an investigation of the efficacy of typology of public urban space; garden that accommodates memorial sculptures. The study intends to analyze the features and flaws of ASEAN Sculpture Garden, as a mediatory role of ASEAN in instilling awareness of unity between ASEAN members to the public. The objective of the study is to analyze the efficacy of the garden to accommodate the rich memorial sculptures. The body of the research is formed by theoretical and case study research. It is projected by three methods; archival research, semi structured interviews and site documentation; direct observations and site visit. The qualitative data then will be analysed using Actor Network theory, keyword coding and site findings. Findings showed that as the main objective of the garden is to exhibit the sculptures, it could be summed up that it has failed to meet the apparent intention based on the site analysis conducted by the researcher. The typology of the space should be able to communicate the project's aims continuously rather than serving the function temporarily. The variables, which are space and time factors are debatable, as the neighboring tourist spot, National Monument residing the wide square managed to attract public attention due to its great efficacy of typological space regardless the time factor. As a conclusion, the typology of space is a huge factor to ensure the park's success.

• 시스템엔지니어링학술지
• /
• 제11권2호
• /
• pp.1-11
• /
• 2015

During the industrial plant system life cycle, required technologies are developed and assessed to analyze their performance, risks and costs. The assessment is called technology readiness assessment (TRA) and the measure of readiness is called technology readiness level (TRL). The TRL consists of 9 levels and through the TRL assessment, the technology to be developed and its components are assigned to their appropriate TRL. TRL assessment should be performed in each life cycle stages to monitor the technology readiness and analyze the potential risks and costs. However, even though the concept of TRL has been largely adopted by numerous organizations and industry, direct and clear assignment of target TRL for each life cycle stage has been overlooked. Direct mapping/assignment of target TRL for each life cycle has benefits as follow: (1) the technical risks condition of each life cycle stage can be better understood, (2) cost incurred if the technology development is failed can be analyzed in each life cycle stage, and (3) more effective decision making because the technology readiness achievement for each life cycle stages is agreed beforehand. In this paper, we propose a steel-making plant system life cycle and TRL assignment to each of the system life cycle stage. By directly assigning target TRL for each life cycle stages, we look forward to a more coordinated (in terms of exit criteria) and highly effective (in terms of technical risks identification and eventually prevent project failure) technology development and assessment processes.

• 기술혁신학회지
• /
• 제17권1호
• /
• pp.124-145
• /
• 2014

국가연구개발사업은 시장실패를 교정하기 위한 정부정책 구현에 있어서 매우 중요한 활동이며 최근 재정규모의 확대로 인해 성과평가에 대한 중요성과 더불어 효율적인 관리체계 구축에 대한 논의가 진행되는 분야이다. 본 연구는 이러한 국가연구개발사업에 대해 전주기 관리방안을 모색하기 위한 탐색 연구이다. 체계적인 논의에 있어서 관리체계에 대한 사항을 사전평가의 관점을 중심으로 살펴보았다. 국외 사례와 국내 제도의 비교를 통해 현행 국가연구개발사업의 수명주기 관리와 관련하여 제도차원의 고려사항을 도출했고 국가연구개발사업의 사전분석에 대한 사례 자료를 수집하고 분석을 수행하였다. 이를 통해 현재 제도상의 문제점을 구체화하였으며 향후 국가연구개발사업의 전주기적 관리를 효과적으로 적용하기 위해서 연구개발 정부지출의 범주화와 지출성격에 따른 관리체계 이원화가 필요함을 제시하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권5호
• /
• pp.411-415
• /
• 2010

요구사항 충돌은 시스템의 기능의 오작동이나 프로젝트 전체의 실패를 가져올 수 있다. 현재 요구사항 충돌연구는 식별에 치중되어 있고 해결에 관한 연구는 우선순위에 의하여 선택을 하는 것이 대부분이다. 요구사항 충돌을 해결하기 위해 본 논문에서는 TRIZ의 이론을 적용하여 창의적인 아이디어를 제시할 수 있도록 돕는 요구사항 충돌 해결 원리(CRRC)를 제안한다. TRIZ는 모순을 해결하여 아이디어를 내는 데 특화된 이론으로 200만 건 이상의 특허 사례를 바탕으로 만들어졌다. CRRC는 요구사항 충돌을 분류하고 유형에 적합한 TRIZ이론을 소프트웨어에 맞게 적용하였다. 대조 실험 적용 결과 CRRC를 제공하면 다양한 종류의 창의적인 요구사항 충돌 해결 방안을 제시할 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.129-136
• /
• 2014

Reliability test is focusing to detect the unexpected reliability failure and solve them for the high quality of products. The test data should be used to assess and project the current level of interesting product reliability and so it is very important to have the accurately assessing methodology with test data. There are two type of trend for test data as constant and changing one during testing and this paper shows the difference in the assessing results of these two cases. There is less information how to define the existence of reliability growth rate changing and calculate the parameters of the reliability growth models to make an accurate assessment with such condition, so i established the process and mathematical model to calculate the parameters at such condition to make reliability growth curve with high Goodness of Fit. I validated the new method with the data made from Monte Carlo Simulation and case from Demko (1993). Even the assessed result with the new methodology may be different with the case by case because of very diversity in test condition and testing product quality, but the process and method founded in this research can be applied to any case using Duane and AMSAA model for their test data assessment. I also present the evaluation method to see the effectiveness with new one which is a conventional knowledge and not popular to use, so it is possible to compare the results with the newly presented and conventional method for better business decision.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.65-71
• /
• 2005

At present, Electronic industries push ahead to eliminate the Pb(Lead) -a hazardous material-from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C\;-\;+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• International Journal of Quality Innovation
• /
• 제8권2호
• /
• pp.57-68
• /
• 2007

Benchmarking is more than just a comparison of measures about different company's performance in a wider sense. It is a methodology of learning-comparing-learning, at least within small and medium sized enterprises. This learning is not just limited to learn by copying successful concepts from other enterprises or competitors. It starts in learning more about the own company, about its structure and processes causing its own success or its failure. This kind of learning is necessary before the enterprise starts watching for a suitable Benchmarking partner. Learning from each other's strengths and weaknesses is the main goal of the European research project Quality beyond Borders! By using the Benchmarking methodology, small and medium sized enterprises get the opportunity to take part in a Benchmarking study and can learn more about the different strengths and weaknesses of other enterprises on both sides of the border. The results of such a Benchmarking can help to identify potentials for future cooperations among German and Polish enterprises in the same market or business. These potentials can lie in different ways of realising the same success or top-position. The Benchmarking study is not focused on an special business or region. That helps to find out trends for different kinds of top-positions, which can be claimed in all markets within a country. Every trend is characterised by different success factors which are responsible for the success in this top-position. In a first overview, the results of the Benchmarking study show 5 different groups of top-positions within a market which all have different profiles regarding to the importance of their success factors. By the end of the Benchmarking study it will be possible, to give answer about the special reasons for different kind of successes of these groups. These answers can be related to a special region within a country, a special business or of course related to possible differences in the expression of the group success factors in comparison of both countries.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6563-6568
• /
• 2013

Background: Tobacco use and quit attempts are two key indicators of the Global Adult Tobacco Survey (GATS) that assess quit attempts among current as well as former tobacco users. The relevant data have inherent policy implications for tobacco cessation programme evaluation. This study aimed to review the concepts of quit attempt assessment and quantifying invalid responses considering GATS-India data. Materials and Methods: GATS assessment of tobacco use and quit attempts were examined in the current literature. Two categories of invalid responses were identified by stratified analysis of the duration of last quit attempt among current users and duration of abstinence among former users. Category A included absolute invalid responses when time-frame of assessment of current tobacco use and less than former tobacco use were violated. Category B included responses that violated the unit of measurement of time. Results: Current daily use, current less than daily use and former use in GATS were imprecisely defined with overlapping of time-frame of assessment. Overall responses of 3,102 current smokers, 4,036 current smokeless users, 1,904 former smokers and 1,343 former smokeless users were analyzed to quantify invalid responses. Analysis indicated overall 21.2% (category A: 7.32%; category B: 17.7%) and 22.7% (category A: 8.05%; category B: 18.1%) invalid responses among current smokers and smokeless users respectively regarding their duration of last quit attempt. Similarly overall 6.62% (category A: 4.7%; category B: 2.3%) and 10.6% (category A: 8.6%; category B: 3.5%) invalid responses were identified among former smokers and smokeless users respectively regarding their duration of abstinence. Conclusions: High invalid responses for a single assessment are due to the imprecise definition of current use, former use and quit attempt; and failure to utilize opportunity of direct data entry interface use during the survey to validate responses instantly. Redefining tobacco use and quit attempts considering an appropriate timeframe would reduce invalid responses.