• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.155-158
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the vibration behavior of flexural beam in the ultrasonic transport system is verified using Laser Scanning Vibrometer. The experiments for verifying vibration are performed in three conditions such as in the maximum transport speed, in the zero speed, and in the change of transport direction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.841-844
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the vibration behavior of flexural beam in the ultrasonic transport system is verified using Laser Scanning Vibrometer. The experiments for verifying vibration are performed in three conditions such as in the maximum transport speed, in the zero speed, and in the change of transport direction.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.34-40
• /
• 2003

Ship damage due to maritime casualties lead to marine pollution, loss of life and properties. The maritime casualties come from the rough sea and bad weather condition generally. Therefore the large-scaled casualties will be derived from loss of structural strength and stability due to the progressive flooding and enlargement of damage by the effect of wave and wind. The improvement of damage survivability is very important in maritime safety This paper described the damage survivability assessment system which can be evaluate and improve the ship safety in consideration of loading, sea and damage condition. The components of the system and decision criteria for damage stability and structural safety is established. The ship modeler and behavior analysis program in wave is developed. Finally further research work is also discussed.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.30-36
• /
• 2003

To improve survivability of damaged ship, assessment of stability and structural safety, and behavior analysis in wave is required. Prediction of sinking time, damage stability and structural strength considering progressive flooding and dynamic force in wave is very important. To do it, a geometric model which can be express damaged ship is prepared. This paper described the geometric modeler for survivability assessment of damaged ship. The modeler is developed based on 3-D geometric modeling kernel, ACIS. The hull form and compartment definition is available fundamentally. And requirement for modeler contains data generation and interface for hydrostatic calculation, behavior analysis, and longitudinal strength analysis and so on. To easy access modeling system by conventional user such as crew, user interface is developing.

• 대한조선학회지
• /
• 제11권2호
• /
• pp.7-14
• /
• 1974

Hydrodynamic moments produced by the rolling oscillation on the free surface and the associated swaying force were exactly calculated by Ursell-Tasai method for the cylinders with Kim's chine form sections($a_1,\;a_7$). The coefficient of the added moment of inertia $K_{\varphi^{\tau}}$, the progressive wave height ratio $\bar{A}$, the coefficient of swaying forces $K_{RS}$, ${\alpha}_{RS}$ of rolling oscillations are shown in the several figures. The results of the computation were compared with those of lewis form sections. It is concluded that the effect of the section form on the added moment of inertia is significant for the cylinder with the section of same beam-draft ratio and sectional area coefficient, on the other hand, a little effect appears on the wave damping.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.1-11
• /
• 2016

The objective of this paper is to present an analytical solution in deep water waves and verify the validity of the theory (Shin, 2015). Hence this is a follow-up to Shin (2015). Instead of a variational approach, another approach was considered for a more accurate assessment in this study. The products of two coefficients were not neglected in this study. The two wave profiles from the KFSBC and DFSBC were evaluated at N discrete points on the free-surface, and the combination coefficients were determined for when the two curves pass the discrete points. Thus, the solution satisfies the differential equation (DE), bottom boundary condition (BBC), and the kinematic free surface boundary condition (KFSBC) exactly. The error in the dynamic free surface boundary condition (DFSBC) is less than 0.003%. The wave theory was simplified based on the assumption tanh $D{\approx}1$ in this paper. Unlike the perturbation method, the results are possible for steep waves and can be calculated without iteration. The result is very simple compared to the 5th Stokes' theory. Stokes' breaking-wave criterion has been checked in this study.

• 한국수산과학회지
• /
• 제26권6호
• /
• pp.567-579
• /
• 1993

태풍통과시 동해의 일본북구연안에서의 수위변동을 조사하기 위해 $1966{\sim}1986$년간의 시간별수위자료분석 및 고분해능($5'{\times}5'$)을 갖는 천해파모델상에서의 수치실험을 행하였다. 자료분석의 주결과는 1) 태풍통과시 Simonoseki(SS)와 Maizuru(MZ) 간에 약 4m/s의 위상속도를 갖는 진행파가 존재하나, 2) Sasebo(SB)와 Hakata(HK) 간에는 파속이 매우 느리고(약 1.7 m/s), 3) HK에서는 SS에 비해 약 반나절 늦게 최대수위에 도달하는 점등이었다. 실험결과는 관측결과와 좋은 대응을 보였다. 실험결과로 볼 때, 연안에 전파하는 진행파는 관측결과와 거의 같은 위상속도 약 4 m/s를 갖는 지형성파로서 확인된다. 태풍이 대한해협을 통과하기전에는 일본연안에 평행한 바람에 의해 생성된 남서방향의 연안젯트류에 의해 파의 전파가 영향을 받고, 태풍이 통과한 후에는 연안젯트류가 약해지면서 파가 전파하게 된다.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.69-82
• /
• 2020

A significant defect of space structures is the progressive collapse issue which may restrict their applicability. Force limiting devices (FLDs) have been designed to overcome this deficiency, though they don't operate efficiently in controlling the force displacement characteristics. To overcome this flaw, a new type of FLD is introduced in the present study. The "all steel accordion force limiting device" (AFLD) which consists of three main parts including cylindrical accordion solid core, tubular encasing and joint system is constructed and its behavior has been studied experimentally. To improve AFLD's behavior, Finite element analysis has been carried out by developing models in ABAQUS software. A comprehensive parametric study is done by considering the effective design parameters such as core material, accordion wave length and accordion inner diameter. From the results, it is found that AFLD can obtain a perfect control on the force-displacement characteristics as well as attaining the elastic-perfect plastic behavior. Obtaining higher levels of ultimate load carrying capacity, dissipated energy and ductility ratio can be encountered as the main privileges of this device. Ease of construction and erection are found to be further advantages of AFLD. Based on the obtained results, a procedure for predicting AFLD's behavior is offered.

• 대한토목학회논문집
• /
• 제32권5B호
• /
• pp.321-329
• /
• 2012

파향이 약간 다르게 진행하는 두 규칙파는 비선형적 상호작용에 기인하여 파봉선이 벌집구조와 유사한 모습을 갖는 현상이 발생하고, 벌집구조 모양의 파봉선 사이에 일정하게 파랑에너지가 매우 낮게 유지되는 노드선 영역이 생성된다. 이러한 파봉선 벌집구조 모양이 해변에 형성되면, 해안선 직각방향으로 생성되는 노드선 영역을 통하여 이안류가 발달하게 된다. 본 연구에서는 해변가에 형성되는 벌집구조 파봉선 현상이 해운대에서 발생하는 이안류의 주요한 메카니즘임을 확인하기 위하여, Boussinesq 파랑모형을 이용하여 일방향 규칙파에 의한 해운대 연안흐름의 수치해석을 수행하고 이를 분석하였다. 그 결과, 해운대 앞바다의 해저천퇴에 따른 파랑굴절로 파향이 서로 약간 다른 파랑들이 해안에 전파되고, 이에 따라 벌집구조가 형성되어 노드영역을 따라 이안류가 매우 잘 발달함을 확인할 수 있었다. 또한, 일정한 파고와 주기를 갖는 다양한 폭의 스펙트럼에 따른 불규칙파 수치모의를 수행하므로, 폭이 넓은 스펙트럼 파랑조건보다 규칙파에 가까운 폭이 좁은 스펙트럼의 파랑조건에서 이안류가 더 잘 발달하는 것을 확인하였다.

• 한국해안해양공학회지
• /
• 제15권3호
• /
• pp.159-166
• /
• 2003

본 연구에서는 천해 파랑 계산에 널리 사용되어지고 있는 확장형 완경사 방정식과 계산 효율은 같게 유지하면서 Laplace방정식을 직접 풀 수 있는 유한 요소 모형에 대해서 연구하였다. 기존의 확장형 완경사 방정식을 사용하는 경우와 같은 계산효율을 유지하기 위하여 파동장을 수심방향으로 1층인 유한요소로 나누고, 요소내의 포텐셜을 수면에 위치한 절점에 대한 포텐셜만으로 표시하도록 한 후, Galerkin 기법을 적용하여 수치모형을 구성하였다. 요소 내 수평방향에 대해서는 통상의 보간함수를 채택하였으며, 수심방향에 대해서는 진행파의 수심방향 거동인 함수를 사용하여 보간함수를 구성하였다. 모형의 개발은 우선 연직 2차원 문제를 대상으로 하였다. 개발된 모형의 검증을 위하여 연직 2차원에서의 파랑 반사 및 전달문제에 적용한 결과, 개발된 유한 요소 모형은 계산상의 효율면에서나 해의 정확도 면에서 기존의 확장형 완경사 방정식에 기초한 모형과 같은 수준을 보임을 확인하였다.