• 한국컴퓨터정보학회논문지
• /
• 제14권2호
• /
• pp.9-16
• /
• 2009

광대역 네트워크의 발달과 함께 멀티미디어 산업의 발달은 IPTV와 같은 디지털 콘텐츠 시장의 확산을 가져오고 있다. 이러한 배경 속에서 멀티미디어에 대한 욕구를 만족시키기 위해 Time-Shift 시스템이 개발되었다. 이 시스템은 시간(Time)에 대한 독립적 특성만 강조되었기 때문에 장소(Place)와 상황(Occasion)에 대해서는 독립적이지 못하다. 이러한 문제를 해결하기 위해서 본 논문에서는 휴대용 멀티미디어 디바이스를 위한 TPO(Time, Place, Occasion)-Shift 시스템에 대한 설계를 제안한다. 휴대용 멀티미디어 디바이스에서 지원 가능한 프로파일과 일반 셋탑박스에서 지원 가능한 프로파일은 다르고, 휴대용 디바이스에서는 대용량의 멀티미디어 데이터를 무한정으로 저장할 수 없기 때문에 한정된 양의 데이터를 원하는 프로파일로 계속저장하는 것이 설계의 핵심이다. 따라서 보다 효율적인 버퍼 관리를 위해서 지정시간 단위의 바스켓을 구성하고, 바스켓의 파일이름에 시간정보를 삽입함으로써 새로운 콘텐츠 구성을 위한 DTS(Decoding Time Stamp) 정보로 파일이름을 사용할 수 있다. 따라서 트랜스코딩을 통하여 데이터 변환할 때, DTS정보를 이용하여 새로운 포맷의 콘텐츠를 휴대용 멀티미디어 디바이스에 구성할 수 있게 된다. 또한 바스켓 기반의 버퍼시스템를 이용하여 모바일 디바이스에 실시간으로 컨텐츠를 구성하고 셋탑박스내에서 메모리를 적게 사용한다. 본 논문에서 제안한 TPO-Shift시스템은 윈도우즈 비스타의 환경에서 다이렉트쇼(Directshow) 재생기를 이용한 셋탑박스, 그리고 휴대용 디바이스인 MS340 단말기로 구현하였으며, 실시간으로 TPO-Shift 시스템을 충분히 실행함을 확인할 수 있었다.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2011

To estimate fuel consumption of a vehicle, a car can be tested on chassis dynamometer. In this case, test causes a lot of time and money. To predict the fuel efficiency of vehicles in the design stage or early stage of development, the development of computer simulation model is necessary. Using simulation to predict the fuel consumption, the driving model which consists of time-velocity profile and time-grade profile is necessary In this study, vehicle model is developed in MatLab/simulink to estimate real driving fuel consumption rate with time-velocity profile, time-shift gear profile and time-grade profile. Vehicle model consists of driver model, engine model, power train model, and so on. On-road vehicle tests to verify the vehicle model are carried out for analyzing the result of simulation and comparing with those of the experiments.

• 기본간호학회지
• /
• 제21권2호
• /
• pp.123-130
• /
• 2014

Purpose: The purpose of this study was to identify quality of sleep and health-promoting behaviors in rotating-shift nurses and to explore the influence of health promoting behaviors on quality of sleep. Method: Participants were 161 staff nurses working in an irregular three shift system in one of three general hospitals located in Kyungpook province. Data were collected using the Pittsburgh Sleep Quality Index and the Health Promoting Lifestyle Profile-IIand were analyzed using hierarchical multiple regression analysis. Results: The majority of the participants had very poor quality of sleep and performed a low level of health promoting behaviors. In terms of health promoting behaviors, nutrition and stress management significantly influenced quality of sleep of these nurses. Conclusion: Results indicate the importance of encouraging rotating-shift nurses to enhance their health promoting behaviors in order to improve quality of sleep.

• 한국CDE학회논문집
• /
• 제17권5호
• /
• pp.312-323
• /
• 2012

Planetary gearing is a gear system consisting of one or more planet gears, revolving about a sun gear. While the planetary gear system has many advantages- for example, high power density, large reduction in a small volume, multiple kinematic combinations, pure torsional reactions, and coaxial shafting, it has not been widely used because of its high bearing loads, inaccessibility, and design complexity. It is also necessary to shift several pairs of gear profiles at a same time. Therefore, designing profile shifted planetary gear system is a difficult and know-how dependent job. This study provides a practical solution to design a profile shifted gear system by the procedural design scheme, and proposes a bearing integrated structure of the dual stage profile shifted gear system with a robust output end. A dual stage profile shifted gear system with the bearing integrated structure is manufactured by the proposed design scheme in this study. This gear system is verified that it is good enough to commercialize, because it has high performance with high gear ratio and robust output end against axial and radial directional runouts in a small space.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권6호
• /
• pp.246-251
• /
• 2003

We report the theory of thin-sample Z -scan for materials, viz. diffusion-dominated photorefractives, having a nonlinearly induced phase that may be proportional to the spatial derivative of the intensity profile. The on-axis far-field intensity is approximately an even function of the scan distance on different positive and negative values for phase shift $\Delta$$\Phi$$_{o}$. In case of positive phase shift, the Z -scan graph shows a minimum and two maxima, while for the negative value, only one minimum is observed. The fact is that far-field beam profiles display beam distortion and shift of the peak as compared with Kerr-type or photovoltaic nonlinearities.s.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.577-582
• /
• 2000

Interdiffusion process at interfaces of chemically identical polymers (e.g., deuterated-nondeuterated pairs) with different molecular weights or polymers with similar physical properties, is studied here by varying the diffusion time. Considering the vacancy flux ($J_v$) and adopting the Cahn-Hilliard interracial energy in describing this system, we can see that the variation of the interfacial composition profile with time is asymetric and the interface moves towards the polymer with the lower molecular weight as interdiffusion progresses. Furthermore, interface shift $\Delta\chi$, which characterizes the interdiffusion between polymers, agrees well with the behaviors of the existing experimental data. We can also obtain the interface shift factor C, which can be converted into values of $D_s$ (self-diffusion coefficient of the smaller molecules), from the slopes of the linear fits to the data of the interface shift.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.194-199
• /
• 2003

In this paper, elastic deformations of several gear teeth are analyzed. The contact between a gear and pinion is modeled as a contact problem. The deformation overlap, which is defined as the interference due to deformation of gear teeth, is defined to represent the deformation characteristics of profile shifted spur sear system. The calculated deformation overlap shows teeth interference in the deformed state of a Rear system.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.146-158
• /
• 1996

The WKB method has been widely used in evaluating of the propagation characteristics of planar waveguides with graded-index profiles. This method, however, yields large errors when a turning point is near or at the discontinuity in the presence of the index discontinuity or index slope discontinuity. Especially, in the case of a truncated-index profile, this phenomenon appears more clearly in the low-order modes and near the cutoff regions. The MWKB method is introduced to reduce these inherent errors of the conventional WKB method. The MWKB method is based on both the linearization of the index profile from an index discontinuity and the introduction of a virtual turning point. It is noticed that the b-v curves obtained by the MWKB method agree well with those of the finite-difference method, and that the phase shift at a turning point depends on both the index profile and its propagation constant. (author). refs., figs.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2002년도 추계학술대회
• /
• pp.19-25
• /
• 2002

Biotechnology in the 21st century will be driven by three emerging technologies: genomics, high-throughput biology, and bioinformatics. These technologies are complementary to one another. A large number of economically important crops are currently subjected to whole genome sequencing. Functional genomics for determining the functions of the genes comprising the given plant genome is under progress by using various means including phenotyping data from transgenic mutants, gene expression profiling data from DNA microarrays, and metabolic profiling data from LC/mass analysis. The aim of plant molecular breeding is shifting from introducing agronomic traits such as herbicide and insect resistance to introducing quality traits such as healthful oils and proteins, which will lead to improved and nutritional food and feed products. Plant molecular breeding is also expected to aim to develop crops for producing human therapeutic and industrial proteins.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2002년도 춘계학술대회
• /
• pp.19-25
• /
• 2002

Biotechnology in the 21st century will be driven by three emerging technologies: genomics, high-throughput biology, and bioinformatics. These technologies are complementary to one another. A large number of economically important crops are currently subjected to whole genome sequencing. Functional genomics for determining the functions of the genes comprising the given plant genome is under progress by using various means including phenotyping data from transgenic mutants, gene expression profiling data from DNA microarrays, and metabolic profiling data from LC/mass analysis. The aim of plant molecular breeding is shifting from introducing agronomic traits such as herbicide and insect resistance to introducing quality traits such as healthful oils and proteins, which will lead to improved and nutritional food and feed products. Plant molecular breeding is also expected to aim to develop crops for producing human therapeutic and industrial proteins.