• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.129-134
• /
• 2002

The radiosurgery is planned that prescribed dose was irradiated to tumor for obtaining expected remedial value in stereotactic radiosurgery. The planning for many irregular tumor shape requires long computation time and skilled planners. Due to the rapid development in computer power recently, many optimization methods using computer has been proposed, although the practical method is still trial and error type of plan. In this study, many beam variables were considered and many tumor shapes were assumed cylinderical ideal models. Then, beam variables that covered the target within 50％ isodose curve were searched, the result was compared and analysed. The beam variables considered were isocenter separation distance, number of isocenters and collimator size. Dose distributions obtained with these variables were analysed by dose volume histogram(DVH) and dose profile at orthogonal plane. According to the results compared, the use of more isocenters than specified isocenter dosen't improve DVH and dose profile but only increases complexity of plan. The best result of DVH and dose profile are obtainedwhen isocenter separation was 1.0-1.2 in using same number of isocenter.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.21-25
• /
• 2010

Burnup of spent fuel should be determined accurately for the safety control of spent fuel. Especially, it is necessary to measure the burnup profile along the nuclear fuel axis. In the present work, an ionization chamber was designed and fabricated to measure the gamma ray profile inside the guide tube of spent fuel. The ionization chamber was composed of three parts; induction part, gas-inlet part, and sensor part. The sensor part had two electrodes; cathode and anode. A guide electrode was considered in the ionization chamber design to make the ionization chamber to be inserted easily into the guide tube. Pure gas (argon and xenon) was inserted into the ionization chamber, and the leakage current and saturation curve were measured to determine the operation characteristics of the ionization chamber. The gamma ray radiation was also measured in relatively high dose environment. The gamma ray profile of the spent fuel will be measured with the ionization chamber.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.561-572
• /
• 2008

Responses of real-time control parameters, such as ORP, DO and pH, to the conditions of biological animal wastewater treatment process were examined to evaluate the stability of real-time control using each parameter. Also an optimum index for supplemental carbon source addition based on NOx-N level was determined under a consideration of denitrification rate by endogenous respiration of microorganism and residual organic matter in liquor. Experiment was performed with lab-scale sequencing batch reactor(SBR) and working volume of the process was 45L. The distinctive nitrogen break point(NBP) on ORP-and DO-time profiles, which mean the termination of nitrification, started disappearing with the maintenance of low NH4-N loading rate. Also the NBP on ORP-and DO-time profiles was no longer observed when high NOx-N was loaded into the reactor, and the sensitivity of ORP became dull with the increase of NOx-N level. However, the distinctive NBP was constantly occurred on pH(mV)-time profile, maintaining unique profile patterns. This stable occurrence of NBP on pH(mV)-time profile was lasted even at very high NOx-N:NH4-N ratio(over 80:1) in reactor, and the specific point could be easily detected by tracking moving slope change(MSC) of the curve. Revelation of NBP on pH(mV)-time profile and recognition of the realtime control point using MSC were stable at a condition of over 300mg/L NOx-N level in reactor. The occurrence of distinctive NBP was persistent on pH(mV)-time profile even at a level of 10,000mg/L STOC(soluble total organic carbon) and the recognition of NBP was feasible by tracing MSC, but that point on ORP and DO-time profiles began to disappear with the increase of STOC level in reactor. The denitrfication rate by endogenous respiration and residual organic matter was about 0.4mg/L.hr., and it was found that 0.83 would be accepted as an index for supplemental carbon source addition when 0.1 of safety factor was applied.

• The Journal of the Korean dental association
• /
• v.55 no.4
• /
• pp.296-302
• /
• 2017

The traditional orthognathic surgery treatment consists of three steps: preoperative orthodontic treatment, orthognathic surgery, and postoperative orthodontic treatment, and the average treatment period is usually two years. Also, patients with Class III malocclusion should spend more time getting their facial features worse during the decompensation process. However, most of the patients who want orthognathic surgery visit the chief complaints of appearance improvement, and resolve this address as soon as possible. The concept of $^{\circ}{\AE}$Surgery - First 'does not cause a facial imbalance caused by decompensation for the pre - operative correction period, and the patient can obtain an improved facial profile immediately after the operation. In addition, the correction period is shortened by Regional Acceleratory Phenomenon (RAP) after surgery. However, it is not applicable to all patients. Patients with severe crowding, severe curve of spee or reverse curve of spee, severe transverse discrepancy of the maxilla and mandibular arch, and severe incisal angles are less likely to apply the technique. Although it is not yet possible to apply this technique to all patients, it has many advantages over the conventional method. Especially, the patients' preference is increasing due to the rapid appearance improvement and the shortening of the total treatment period.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.195-201
• /
• 2002

This paper deals with the precision grinding for aspherical surface of optical parts. A parallel grinding method using the spherical wheel was suggested as a new grinding method. In this method, the wheel axis is positioned at a $\pi$/4 from the Z-axis in the direction of the X-axis. An advantage of this grinding method is that the wheel used in grinding achieves its maximum area, reducing wheel wear and improving the accuracy of the ground mirror surface. In addition, a truing by the CG (curve generating) method was proposed. After truing, the shape of spherical wheel transcribed on the carbon is measured by the Form-Talysurf-120L. The error of the form in the spherical wheel which is the value ${\Delta}x$ and $R{^2}{_y}$ inferred from the measured profile data is compensated by the re-truing. Finally, in the aspherical grinding experiment, the WC of the molding die was examined by the parallel grinding method using the resin bonded diamond wheel with a grain size of ＃3000. A form accuracy of 0.16${\mu}m$ P-V and a surface roughness of 0.0067${\mu}m$ Ra have been resulted.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.47-54
• /
• 2011

In this paper, longitudinal behaviors of a tunnel with respect to various conditions are analyzed, and a new equation of longitudinal deformation curve during tunnel expansion is proposed. Finally, the range of protection by a protector is investigated using the proposed equation. To achieve the objectives, numerical analysis according to the ground and expansion conditions is performed. The results show that the range of protection, when a 2 traffic lane tunnel is expanded to 4 traffic lanes, should cover at least 24m to backward and 35m forward.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.7
• /
• pp.712-722
• /
• 1992

Several voltage instability/collapse problems that have occurred in the electric utility industry worldwide have gained the attention of engineers and researchers of electric power systems. This paper proposes an effective calculation scheme of the extreme loading point and nose curves(P-V curves) using modified Newton-Raphson(N-R) load flow method and the Continuation Method. This method provides detail and visual information of the power system voltage profile and operating margin ro operators and planners. In this paper, a modified load flow claculation method for ill-conditioned power systems is introduced for the purpose of seeking more precise load flow solutions and nose curves, and the Continuation Method is also used as a part of the solution algorithm for the calculation of extreme loading point and nose curves. The conventional polar coordinate based N-R load flow program is modified to avoid numerical difficulties caused by the singularity of the Jacobian matrix occuring in the vicinity of extreme loading point of heavily loaded systems. Application results of the proposed method to Klos-Kerner 11-bus system and modified IEE-30-bus system are presented to assure the usefulness of the approach.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.111-121
• /
• 2007

Coefficient of spherical aberration of the objective lens in the KBSI-HVEM was evaluated by diffractogram method. Instrumental resolution was also discussed with this method. In order to improve the accuracy, digital processing and graphical curve fitting for intensity profile of diffractogram were employed. Experimental concerns where the optimal procedure of the measurement con be accomplished for this study were discussed. The spherical aberration coefficient $(C_s)$ was estimated to be $2.628{\pm}0.04\;mm$ from this study, which was almost coincident with the value of the manufacture's suggestion $(C_s=2.65\;mm)$.

• Transactions of Materials Processing
• /
• v.21 no.1
• /
• pp.67-74
• /
• 2012

Although high productivity is possible, cold forged helical gears have not been widely used due to difficulty in achieving mechanical properties as well as dimensional accuracy of the product. Confidence in the gear characteristics also is very important in heavy-duty gear applications. Therefore, the properties of forged gears must be compared to the properties of conventional machined gears. The properties might be different due to the different fabrication processes. In this study, machined and forged products both before and after heat-treated have been compared by measuring the residual stress and involute curve of the tooth. Characteristics of hardness and microstructure were also compared. Additionally, tooth fracture strength was compared for the heat-treated products. Moreover, the tooth strength and the fracture pattern were compared between the machined and forged gears. The forged gear showed decreased changes in residual stress and decreased changes in dimensions when compared to the machined gear before and after heat treatment. The forged gear was over 10% better than the machined gear in tooth strength.

• YAKHAK HOEJI
• /
• v.44 no.2
• /
• pp.189-192
• /
• 2000

We examined a dermal pharmacokinetics for a new SYC-fentanyl patch in rabbits. Determination of fentanyl in the plasma was performed using a gas chromatography with nitrogen-phosphorus detection system and a capillary column. One patch per animal (fentanyl 2.5 mg) was applied to clipped back skin for 72 hours. The plasma fentanyl concentration profile of SYC-patch was similar to that of a conventional patch (Durogesi $c^{R}$, Janssen Co.). No significant difference was observed in the pharmacokinetic parameters, the area under the concentration-time curve (AU $C^{0-}$72hrs/) and the total area under the first moment-time curve (AUM $C^{0-}$7hrs/), between the two patch types. The AU $C^{0-}$7hrs/ and AUM $C^{0-}$72hrs/ of durogesi $c^{R}$ were 183.3$\pm$46.28 ng＊hr/ml and 6,450$\pm$1,939ng＊h$r^2$/ml, and those of SYC-fentany patch were 217.2$\pm$50.51$\pm$ng＊hr/ml and 8,022$\pm$2,245ng＊h$r^2$/ml, respectively (n=3). This result indicates that the new SYC patch has a similar bioavailability compared to durogesi $c^{R}$ patch. Therefore, the SYC-patch may be considered as a bioequivalent fentanyl patch.patch.tch.