• 복식
• /
• 제66권3호
• /
• pp.75-92
• /
• 2016

The purpose of this study was to prove how sociocultural perspective of obesity, differences in consumers' perception of body and attitudes of accepting obesity affected individuals' clothing behaviors through cross-cultural studies. The data collected were composed of 612 Korean and US consumers in the 20's and 30's that had experiences in purchasing plus-size products. The results were as follows. First, BMI index was lower in Korean consumers than the US consumers, but Korean consumers received more stress from being overweight compared to the US consumers, and had a more negative attitude about their body. Second, although Korean consumers had lower BMI index and degrees of obesity than US consumers, they were severely stressed by obesity and were found to have a higher level of dissatisfaction with their bodies. Third, Korean consumers responded more sensitively to obesity and had a tendency to display a more negative attitude regarding obesity, and a more passive dependence on clothing. Forth, differences in the body shape were reflected even in wearing evaluation, and US consumers showed a more positive attitude toward evaluations of size suitability and fitness. Fifth, the plus-size market for Korean consumers was still not active, and most products purchased were generic brands obtained from online shopping malls through the Internet. However, in the case of the US, in which the ratio of obese people is high and the plus-size market is growing, consumers were purchasing plus-size brands through various distribution online and offline channels. Sixth, Korean consumers were less satisfied than US consumers with shops, sizes and fitness; however, they were more satisfied with design factors. Finally, it is expected that this study can offer practical implications for marketers and product developers running plus-size market for young obese consumers in their 20 and 30s.

• 한국의류학회지
• /
• 제30권9_10호
• /
• pp.1378-1388
• /
• 2006

We conducted a questionnaire survey of 481 Korean female college students and measured anthropometrically 2 girth of their bodies(bust, under bust girth) in order to understand the psychological needs about brassiere and the physical characteristics of consumers aged between 19 and 25(the 1924 generation). There were two major problems to be solved to improve the fit of brassiere in aspect of size. First, most brands for this age group aimed at product differentiation mainly on visual design not on brassiere size. According to the body measurements, the distribution of brassiere size had 6 sections '70AA, 70A, 70B, 75AA, 75A and 75B cups' showing a rate of 63.8% but most brands for this age group were producing '75A, 80A, 85A, 75B, 80B and 85B cups' showing a rate of 24.7%. Second, most subjects of this survey didn't know their own breast size and the sizing system of brassiere which are necessary in order to select the proper brassiere size. And most subjects were wearing a bigger size brassiere than their own body size even though one was in the range of '75A, 80A, 85A, 75B, 80B and 85B'. It might be possible that the dimensions of brassiere products in the market and the sizes indicated on the labels do not correspond. For increasing the consumer satisfaction it is necessary to adjust the production rate of brassiere sizes and to develop ergonomic brassiere products with proper dimensions and shapes for each brassiere size.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.

• 한국식품위생안전성학회지
• /
• 제32권5호
• /
• pp.404-410
• /
• 2017

HPLC-size-exclusion chromatography에 의해 가공식품에서 알긴산프로필렌글리콜의 함량을 분석하는 방법이 개발되었다. 알긴산프로필렌글리콜을 분석하기 위해 GF-7M HQ column과 LT-ELSD detector가 선정되었다. 알긴산프로필렌글리콜 분석을 위한 전처리 조건으로는 $20^{\circ}C$에서 150 rpm으로 3시간 동안 추출하는 방법이 선정되었다. 알긴산프로필렌글리콜을 5 농도(300, 500, 700, 1,000, and 1,500 mg/kg) 범위에서 검량선을 작성한 결과 직선성($R^2$)은 0.9873으로 측정되었다. HPLC system에 의한 알긴산프로필렌글리콜 분석시 검출한계(LOD) 및 정량한계(LOQ)는 각각 171.43 mg/kg 및 519.50 mg/kg이었다. Size-exclusion chromatography에 의해 얻은 회수율 및 변동 계수(coefficient of variation)는 각각 86.1~110.4% 및 4.1~13.5%이었다. 본 연구에서 개발된 HPLC-size-exclusion chromatography system을 적용하여 134 품목의 가공식품에서 알긴산프로필렌글리콜 함량을 분석하였다. 이 결과들은 이 방법이 가공식품에서 알긴산프로필렌글리콜 함량을 분석하는데 적용할 수 있는 방법이라는 것을 나타낸다.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.28-34
• /
• 1998

Polyvinyl acetate emulsion has been widely used as adhesives for wood and paper, paint additives and binders for fiber, leather, and other materials because it is an excellent adhesive with many advantages including low in toxicity risks and manufacturing cost. It is expected the consumption of polyvinyl acetate emulsion as adhesives will increase in cigarette industry as well as in paperboard coating industry. Recently the operation speed of the cigarette tip wrapper increased so substantially that improvement of the emulsion properties is required including good wet tack development, narrow and controlled particle size distribution, low viscosity, etc. In this study the effects of such polymerization conditions as the type and amount of emulsifier, internal or external plasticizing, and emulsification methods on the viscosity and particle size of polyvinyl acetate emulsions were examined. Results showed that polyvinyl alcohol with a high degree of hydrolysis and low molecular weight and nonionic surfactants are superior to anionic surfactant in improving adhesion and emulsion stability. They also tend to produce emulsions with smaller particle size. External plasticization with dipropylene glycol dibenzoate was more effective in improving flexibility than internal plasticization with butyl acrylate. Monomer emulsification under high shear was more effective in decreasing the particle size.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.717-722
• /
• 2002

The results of an experiment on the water purification of the porous concrete and its influence on the compressive strength are reported in this paper. Two different sizes of coarse aggregate of 5-10, and 10-20mm, and three absolute volume ratios of paste to aggregate of 30, 40 and 50 percent for a given size of aggregate were used. For the compressive strength, the concrete with the aggregate size of 5-10mm showed much higher strength than that with the aggregate size of 10-20mm. But, the compressive strength is higher when the ratio of paste to aggregate is smaller. In the water purification experiment, the amount of attached an organism on the porous concrete surface indirectly is examined by measuring the consumption of the Dissolved Oxygen (DO). The ability of the water purification is evaluated by the removal amount of the Total Phosphorus(T-P) and Total Nitrogen(T-N). The ability of the removal of the T-N and T-P in the test water is superior to a porous concrete with a smaller size of aggregate and a higher void content. These results are owing to a large specific surface area of the specimen. As a result, porous concrete using by-products has sufficient performance of water purification.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.632-638
• /
• 2002

Electron beam (EB) and Gas tungsten arc (TIG) welds were performed on 12.7 mm thick Ti-6Al-4V plate (ASTM Titanium Grade 5). Charpy-V toughness and hardness, as well as, microstructure of the welds and penetration from the macrostructure were studied. It appears that by EB welding rather smaller $\beta$-grains than with TIG welding can be obtained. Next to the fusion line the $\beta$-grain size in the HAZ was 50 ${\mu}{\textrm}{m}$l while in the weld metal it was 150 ${\mu}{\textrm}{m}$. Charpy-V toughness of the EB weld metal was equal or even better to that of base metal, which shows that the $\alpha$-martensite per se is not particularly brittle if only the grain size is fine enough. This is similar to behavior of low carbon martensite in steel. The grain size was studied with light optical and scanning electron (SEM) microscopes. Thus for products, for products which can be manufactured automatically with very narrow fit, the EB welding of Ti-6Al-4V appears to yield satisfactory toughness without any complex post weld heat treatment. ill this study as in earlier studies the TIG welds gave lower toughness than that of the base material due to the higher heat input and slower cooling as compared to EB welding.

• 산업기술연구
• /
• 제28권B호
• /
• pp.47-52
• /
• 2008

In this study, GAC adsorption, ozonation and $O_3/GAC$ hybrid processes were investigated for treatment of humic acid. The degradation characteristics and efficiencies of humic acid in each process were evaluated through pH variation, $UV_{254}$ decrease, DOC removal, change of molecular size distribution and by-products formation. DOC removal rate in $O_3/GAC$ hybrid process (80%) was higher than arithmetic sum of ozonation (38%) and GAC adsorption process (19%) by synergism. $UV_{254}$ decrease rate of humic acid was also the highest than any other processes when treated in $O_3/GAC$ hybrid process. Molecular size distribution was not significantly changed in the GAC adsorption process. Main distribution of molecular size of humic acid was converted from 3 k~30 kDa into 0.5 k~3 kDa in ozonation. But the most of large molecular sizes of humic acid converted into small molecules(smaller than 0.5 kDa) in $O_3/GAC$ hybrid process. Quantities of formaldehyde and glyoxal formed in $O_3/GAC$ hybrid process were less than the ones in ozonation.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.308-311
• /
• 2010

Porous SiC samples were prepared with three types of wood (poplar, pine, big cone pine) by simply embedding the wood charcoal in a powder mixture of Si and $SiO_2$ at 1600 and $1700^{\circ}C$. The basic engineering properties such as density, porosity, pore size and distribution, and strength were characterized. The samples showed full conversion to mostly $\beta$-SiC with good retention of the cellular structure of the original wood. More rigid SiC struts were developed for $1700^{\circ}C$. They showed similar bulk density ($0.5{\sim}0.6\;g/cm^3$) and porosity (81~84%) irrespective of the type of wood. The poplar sample showed three pore sizes (1, 8, $60\;{\mu}m$) with a main size of $60\;{\mu}m$. The pine sample showed a single pore size ($20\;{\mu}m$). The big cone pine sample showed two pore sizes (10, $80\;{\mu}m$) with a main size of $10\;{\mu}m$. The bend strength was 2.5 MPa for poplar, 5.7 MPa for pine, 2.8 MPa for big cone pine, indicating higher strength with pine.

• Industrial Engineering and Management Systems
• /
• 제11권3호
• /
• pp.288-298
• /
• 2012

Lot sizing and shipment scheduling are two interrelated decisions made by a manufacturing plant and a third-party logistics distribution center. This paper analyzes a dynamic inbound ordering problem and shipment problem with a freight container cost, in which the order size of multiple products and single container type are simultaneously considered. In the problem, each ordered product placed in a period is immediately shipped by some freight containers in the period, and the total freight cost is proportional to the number of containers employed. It is assumed that the load size of each product is equal and backlogging is not allowed. The objective of this study is to simultaneously determine the lot-sizes and the shipment schedule that minimize the total costs, which consist of production cost, inventory holding cost, and freight cost. Because the problem is NP-hard, we propose three meta-heuristic algorithms: a simulated annealing algorithm, a genetic algorithm, and a new population-based evolutionary meta-heuristic called self-evolution algorithm. The performance of the meta-heuristic algorithms is compared with a local search heuristic proposed by the previous paper in terms of the average deviation from the optimal solution in small size problems and the average deviation from the best one among the replications of the meta-heuristic algorithms in large size problems.