• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.93-98
• /
• 2001

Using waste glass in concrete can cause crack and strength loss by the expansion of alkali-silica reaction(ASR). In this study, ASR expansion and properties of strength were analyzed in terms of clear waste glass grading, and by-products(fly ash, blast-furnace slag) and by-products content for reduction ASR expansion due to waste glass. In this accelerated ASTM C 1260 test of waste glass, pessimum grading can be found. Also, when the by-products are used with waste glass, there is an effect on reduction of expansion and strength loss due to ASR between the alkali in the cement paste and the silica in the waste glass.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1207-1208
• /
• 2006

We developed the copper core ball electroplated with Sn-Ag-Cu of the eutectic composition which used mostly as Pb free solder ball with high reliability. In order to search for the practicality of this developed copper core ball, the evaluation was executed by measuring the initial joint strength of the sample mounted on the substrate and reflowed and by measuring the joint strength of the sample after the high temperature leaving test and the constant temperature and the humidity leaving test. This evaluation was compered with those of the usual other copper core balls electroplated with (Sn,Sn-Ag,Sn-Cu,Sn-Bi) and the Sn-Ag-Cu solder ball.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.290-307
• /
• 2008

The aim of this study was to estimate adverse effect on compression strength of corrugated fiberboard containers due to vibration during distribution process. Distribution environment such as road conditions and compression strength of corrugated fiberboard containers for selected agricultural products were studied. We found that increasing humidity does not effect significantly on natural frequencies of boxes, but results in accelerative effect to decrease compression strength of boxes. Box structures and product types also effect on loss of compression strength greatly.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.45-52
• /
• 2004

Continuing pressure for the weight reduction of vehicles and improvement of collision safety is driving the development of new high strength steel with excellent formability. The formable high strength steels which have excellent drawability have been developed and applied to the complicated inner panels. Although BH steel have mainly occupied the material market for outer panels, it is challenged by DP steel which have low yield strength and good bake hardenability. The advanced high strength steel, TRIP steels and DP steels which have excellent formability are new alternatives to conventional HSLA steel for structural parts such as members and pillars. HSLA steels also have been used for automotive bumper reinforcements due to their high yield ratio. Higher grade complex phase steel(CP) were developed for bumper reinforcements by addition of precipitation hardening to transformation strengthened steel. The usage of the advanced high strength steel ale increasing and will become the main material in structural parts near future. This paper describes the features of newly developed high strength cold rolled steels for automobiles.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.82-89
• /
• 1999

This paper present the strength estimation of precast concrete products by chloride ion penetration method. The relation between the strength of precast concrete product and the ion passing charge is linear and a numerical model of FCK =515.96-0.201Q is prposed. The results showe good agreement at about 9.0% error ration with the estimated model results for real precast concrete product.

• Transactions of Materials Processing
• /
• v.31 no.2
• /
• pp.89-95
• /
• 2022

3D printing products manufactured by material extrusion are used in many industrial fields recently. However, these products are difficult to use in the field due to their low tensile strengths. In order to solve this problem, research on improving the tensile strength of the output using a 3D printer has been continuously conducted. In this study, we performed a tensile test using Universal Testing Machine according to infill pattern, nozzle temperature, bed temperature, and printing speed conditions. Results revealed that tensile specimen of concentric shape had the highest tensile strength in infill pattern condition and that the tensile strength increased linearly with increasing nozzle and bed temperatures. However, the tensile strength decreased with increasing printing speed. Consequently, we confirmed that tensile strength could be increased and decreased depending on output conditions of 3D printing.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.28-32
• /
• 1976

This study was carried out to know the adaptability of barley flour, potato flour and white ash as extender and filler of urea-formaldehyde resin for plywood as a substitute material of wheat flour. The extenders and filler used at this study were extended by several groups of percentages. Shear strength, moisture contents, and specific gravities were compared among tested groups. The results obtained are summarized as follows. 1) Wet and dry shear strength of plywoods extended by 10% barley flour, 30% potato flour, and wheat flours were shown better results than non extended plywoods. 2) There was no significant difference between plywoods extended until 50% barley flours and non extended plywoods. 3) Shear strength of plywoods extended by 50% potato and 100% barley flours were shown worse result than non extended. 4) Dry and wet shear strength of plywoods extended by white ash were shown worst result. 5) The plywoods extended by potato flours were shown not only better shear strength, but also considered more profitable cost for extending.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.191-199
• /
• 2004

The purposes of this study were to estimate the material properties of the recently developed domestic composite resins for core filling material (Chemical, Dual A, Dual B；Vericom, Korea) and to compare them with other marketed foreign products (CorePaste, Den-Mat, USA；Ti-Core, Essential Dental Systems, USA；Support. SCI-Pharm. USA). Six assessments were made：working time. setting time. depth of polymerization. flexural strength. bonding strength. and marginal leakage. All items were compared to ISO standards. All domestic products satisfied the minimum requirements from ISO standards (working time：above 90 seconds. setting time：within 5 minutes). and showed significantly higher flexural strength than Core Paste. Dual A and B could. especially. reduce the setting time to 60 seconds when cured with $600mW/cm^2$ light intensity. All experimental materials showed 6 mm depth of polymerization. Bond strengths of Ti-Core and Dual B materials were significantly higher than the other materials. Furthermore. three domestic products and Ti-Core could reduce the microleakage effectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.79-83
• /
• 1999

A cationic demand(CD) is a very useful indication for determining the optimum dosage rate of retention aids to the papermaking stock at the wet end. Polyelectrolyte titration has been most often used to determine a CD. Highly accurate results can be obtained by this method when the ionic strength of sample is low. But this is accompanied by the serious errors when the ionic strength is higher than that corresponding to 20 milli molar(mM) monovalent, 2 mM divalent or 0.2 mM trivalent ions because of no occurrence of the end point of titration. Therefore, it is very difficult or almost impossible for the conventional method to be applied to the industrial suspensions such as papermaking stock and industrial waste water. Then a novel method using chromophoric labeled cationic polymer which can be applicable to the sample with high ionic strength has been developed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.52-57
• /
• 2003

The charcoal is known to have gas adsorption capability and electrical properties. Some practical applications of carbon materials for the purpose of limited electrical conduction were made in these days. In this paper, we applied the several different kinds of charcoal to the papers in three different ways to investigate if charcoal application method affects its electrical conduction capability. Wet end addition, making multiply, and coating method were tested. The area electrical resistivity of charcoal containing paper was measured. The strength properties of charcoal containing paper were compared to those of the control, which had no charcoal in it. Experimental results showed that manufacturing conditions of the charcoal itself changed its electrical and strength properties of charcoal containing paper. The electrical properties of charcoal containing paper can be used for the removal of electrostatic problem in packaging system. The strength property of the charcoal containing paper should be kept, at least, over the minimum requirement for the packaging system. By using coating method on paper or making multiply, strength loss of paper by inclusion of charcoal could be overcome.