• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.739-748
• /
• 2001

A self-organizing fuzzy logic controller using a genetic algorithm is described, which controlled the glucose concentration for the enhancement of flavonoid production in a fed-batch cultivation of Scutellaria baicalensis G. plant cells. The substrate feeding strategy in a fed-batch culture was to increase the flavonoid production by using the proposed kinetic model. For the two-stage culture, the substrate feeding strategy consisted of a first period with 28 g/I of glucose to promote cell growth, followed by a second period with 5 g/I of glucose to promote flavonoid production. A simple fuzzy logic controller and the self-organizing fuzzy logic controller using a genetic algorithm was constructed to control the glucose concentration in a fed-batch culture. The designed fuzzy logic controllers were applied to maintain the glucose concentration at given set-points of the two-stage culture in fed-batch cultivation. The experimental results showed that the self-organizing fuzzy logic controller improved the controller\`s performance, compared with that of the simple fuzzy logic controller. The specific production yield and productivity of flavonoids in the two-stage culture were higher than those in the batch culture.

• Journal of Veterinary Clinics
• /
• v.12 no.1
• /
• pp.819-827
• /
• 1995

An attempt to reproduce pyometra by means of experimental uterine infection was conducted with the 10 mongrel hitches of the anestrus, proestrus, metestrus, and postpartum uterine involution stages. Organism used was hemoltic E. coli. origially isolated from uterine pus of a bitch that had the canine pyometra. One ml of broth culture containing $2{\times}10^6$ CFU was inoculated into the uterine horn with the uterine cervix ligated. Aか bitches were ovariohysterectomized at the 7th or 14th day after inoculation and the uterus was provided for macroscopic and microscopic observations. An experimental production of pyometra was successful in 7(70%) of 10 mongrel bitches, and the incidence of pyometra was seen 100% in the stage of anestrus, 100% in the stage of metestrus, 50.0% in the stage of pyomestrus, and 33.359 in the stage of uterine involution. Histologically, these uteri were characterized by the presence of cystic. endomeetrial hyperplasia(CEH) and acute endometritis superimposed on the cystic hyperplasia. And the pyometra with CEH could be seen 66.7% in metestrus 50% in anestrus, 33.3% in involution and in 0% in proestrus stage. Blood progesterone concentrations were showed as a normal range of the each stage of sexual cycle and any relationships between the progesterone concentrations and the incidence of pyometra were not observed.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.103-118
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed using 2D drawings, based on the data of parent ships, and subjective intuition from past experience. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection based on the initial hull structural model(3D CAD model), were developed in this study. Here, the initial hull' structural model was generated from the initial hull structural CAD system early developed by us. To evaluate the developed methods. these methods were applied to corresponding processes of a deadweight 300,OOOton VLCC. As a result. it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.1
• /
• pp.1-18
• /
• 1993

The family disaggregation model of hierarchical production planning (HPP) is the problem of (0 -1) mixed integer programming that minimizes the total sum of setup costs and inventory holding costs over the planning horizon. This problem is hard in a practical sense since optimal solution algorithms have failed to solve it within reasonable computation times. Thus effective familoy disaggregation algorithm should be developed for HPP. The family disaggregation algorithm developed in this paper consists of the first stage of finding initial solutions and the second stage of improving initial solutions. Some experimental results are given to verify the effectiveness of developed disaggregation algorithm.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.205-209
• /
• 2000

This paper is concerned with development of the production-oriented structural design information system to predict the inaccuracy level of panel blocks and to consider the result at the structural design stage. Emphasis is placed on that the inaccuracy during production should likely be considered at the structural design stage to reduce the undesirable adjusting work and therefore to enhance the productivity. The primary goal of the present study is to consider the productivity and the efficient design at the same time for a high quality product of panel block. Usefulness of the developed information are illustrated through some application examples.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.97-103
• /
• 1991

This paper deals with a scheduling problem with the objective of maximizing the throughput rate in flexible manufacturing system with shop type. Manufacturing system is consisted of multi-stage in series. All kinds of parts are processed in same in processing time. No buffer space is allowed between stages, and no part waiting is allowed in each stage. Part flow control method for determining the optimal production sequence of all parts and the production starting time of each part is proposed.

• IE interfaces
• /
• v.7 no.2
• /
• pp.75-85
• /
• 1994

This paper presents a production scheduling model in a block assembly shop in shipbuilding industry. In a block assembly shop, the most important performance criterion is load leveling, which balances manpower and work area utilization through the planning horizon. The problem is formulated as a mixed-integer nonlinear programming(MINLP) problem of which objective function is to optimize load leveling. The developed MINLP problem can not be solvable due to computational complexity. The MINLP problem is decomposed into two stage mixed-integer linear programming (MILP) problems to obtain a good solution, but the decomposed MILP problems are still computationally intractable because of combinatorial complexity. Therfore, a heuristic method using linear programming is proposed to solve two stage MILP problems sequentially. The proposed heuristic generates a good production schedule within a reasonable computation time, and it is easily applicable for establishing the production schedule in a block assembly shop in shipbuilding industry.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2153-2160
• /
• 2008

This paper develops an algorithm for probabilistic production cost credit evaluation of wind turbine generators(WTG) with multi-state. Renewable energy resources such as wind, wave, solar, micro hydro, tidal and biomass etc. are becoming importance stage by stage because of considering effect of the environment. Wind energy is one of the most successful sources of renewable energy for the production of electrical energy. Case study demonstrates that the wind speed credit in view point of economics can be assessed by using the proposed methodology.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.177-192
• /
• 1995

The purpos대 f this research was to figure out clothing imagery underlying Shakepeare's King Lear and transfer it into actual stage costume. Three steps were taken in order to achieve the purpose . The first step exemined theoretical background of the Shakepeare's imagery. The second step reviewed a wide spectum of stage costume used in the last four centuries. The final step was to design and produced actual stage costume focusing on Lear, while considering clothing imagery drawn from the previous steps. King Lear contained rich clothing imagery which could contrast the relationship between material and spirit. In particular, it shed light on the contrast between Lear's divesting and Edgar's wearing and denoted that wearing and divesting processes were closely related to spiritual and status changes. A review of stage costume used for four centuries was prepared in order to understand how clothing imagery was applied in producing stage costume. It was found that their stage costume was reflecting clothing imagery captured from the analysis of king Lear. On the basis of this review, this research presented Lear's stage costume which applied clothing imagery drawn from King Lear. In producing stage costume , actual stage costume used Elizabethan fashion as its basic color and pattern. It also utilized modern clothing production techniques and ornaments acceptable in these days. As Lear was depicted as a character who underwent spiritual and status changes in the process of divesting , his costume was produced in line with this clothing imagery (i.e., divesting). The long journey of reviewing and analyzing King Lear from a stand point of clothing reassured us, on the one hand, the importance of stage costume. On the other hand, it established the groundwork for developing the methodology of fashion design by applying clothing imagery drawn from literature to design and production of stage costume.