• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.1-9
• /
• 2003

In this study, a manufacturing process for PV module has been developed using an automatic arraying equipment. It is expected that this process could improve the productivity and curtail the production cost in the photovoltaic module production line. From the results, it is proved that this process reduces Line-stop and enhances the productivity more than 15% a day which can be related directly to the production line cost.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.1-4
• /
• 2002

A automatic production system was developed for high productivity and safety. The semi-progressive die was unfavorable for more productivity, safety, material extravagance and incongruent high-speed production. Developed progressive die is suitable for the high production and guarantee triple production by acceptance of three array type for automobile adjust plate. We adopt Pro-$Engineer{\circledr}$ for three dimensional computer aided design suitable for the disassembly and assembly evaluation. The conclusion of this study is as follow. First, press die parts solid modeling system is built by using Pro-$Engineer{\circledr}$ through this research and verified allowable tolerance and possibility of assembly and disassembly of parts. Therefore we can reduce die manufacturing time and cost. Second, We produce 1000 units pet hot coil 1ton by traditional method, but we can acomplish material saving effect about 12% as 120 units in case of new progressive die. Fourth, we acomplished manufacturing cost curtailment effect more than 20% in comparison with traditional method.

• 통상정보연구
• /
• 제9권2호
• /
• pp.257-283
• /
• 2007

As Global industrial structure is diversified, multinational corporations accomplished fast internationalization to introduction of new management policy by development of an IT technology. Enterprise' business environment is changing transcending border. To overcome raging waves of change accident and to be secured enterprise's future, the logistics is recognized the third profit source joining in curtailment of sale enlargement, production cost. To seek cost saving or reform in logistics class that is last area of pursuit of profits within ancient city life in the fast lane from these viewpoint, importance of study that integrates and manages international logistics bases supply neck walk is emphasized. Specially, to meet on in terms of competitive power security regarding curtailment of logistics cost is available through link between logistics bases, various consumer's request, merchandise and service logistics management that supply fixed quantity as is reliable in right place at good season was embossed by point game plan of business management, and SCM efficiency anger of mortification international logistics activity importance of study that see at that dominate competitive advantage point bring. This study analyzes interrelation and presents model for integration of international logistics bases supply network with supply network habit at factor and supply chain, and supply network activity in integration of supply chain process and production. Also, it establishes following method of study to achieve study purpose for actual proof analysis for integration sequence of international logistics bases supply network. Specially, immersion of network and supply network, very high interrelation appeared by thing which is with international logistics base supply network integration. The integration of international logistics base supply network means that the enterprises which give trust and sincerity deal with market environment change positively and can decide proceeding of various cooperative work. Also, it means the possibility by necessity of cooperative relation and interdependence to continuous immersion and normative immersion, for the maintain of long business relations.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.83-90
• /
• 2004

Pulp mold is one of the famous environmental friendly materials, which made from re cycled materials such as old newsprints through the environmental friendly processes. Furthermore, the used pulp mold can be easily recycled and the pulp mold itself is biodegradable. However, the higher cost and some deficiency in physical properties of pulp mold have been considered as issues to be overcome for a substitute for polymeric packaging materials such as EPS (Expandable Polystyrene). The way for the optimization of a pulp mold mill was proposed in this report. The possible reduction of drying energy was calculated by using a computer simulation method, which could Provide the detailed information about mass balance of overall process. The simulated results showed a great possible curtailment of production cost by improving the forming systems, for example, increasing the temperature and the dryness of a wet pulp mold.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.171-180
• /
• 1989

The automation of textile machinery in the fabric manufacture is strongly demanded in order to improve the industrial structure related to labour-force and cost curtailment, in addition, to keep step with the various and small production system and the consumption tendency requesting a high quality fabrics. In this thesis, the technology applying the computer to an air jet loom and characteristics obtained from it are derived. To efficently apply an automized and unmanned textile machinery, an air jet loom is equipped with the let-off, take-up and weft insertion device attached a central processing unit(CPU) which can automatically operate according to a program. As a result, an air jet loom is available for the factory automation, which has advantages including productivity promotion, high quality security, energy savings, specification & variety, efficient production control, in fabric manufacturing process.

• 공업화학
• /
• 제28권3호
• /
• pp.369-374
• /
• 2017

바이오센서를 상업적으로 양산하고자 할 때 제작비의 경제성이 고려되어야 한다. 과산화수소를 정량하기 위한 효소전극 제작 시 필수적으로 사용되는, 서양고추냉이로부터 추출된 과산화효소는 대단히 고가이므로 탄소반죽법에 의한 전극제작의 제한 요인이 된다. 이 문제를 우회하고자 본 실험실에서는 생활주변에서 쉽게 얻을 수 있는 재료로 대체하기 위하여 아카시아 잎을 효소원으로 사용하여 과산화수소 센서를 제작하고 그것의 전기화학적 특성을 살펴보았다. 일정전압전류법으로 얻어진 10개 이상의 전기화학적 파라미터와 실험적 결과들은 효소전극이 정량적으로 그 기능을 발휘하고 있음을 보여주었다. 이런 사실들은 시판 과산화효소가 아카시아 잎으로 대체될 수 있음을 보여주는 것이다.

• 농촌지도와개발
• /
• 제22권3호
• /
• pp.333-344
• /
• 2015

The purpose of this study was to assume suitable cultivation areas by items and expectably suitable cultivation areas through coefficient of specialization and spatial concentration analysis, and suggested regional specialized items discovered by this research and regional specialized business management plans & development directions. This study has monitored changing aspects of spatial distribution of suitable cultivation areas in stockbreeding items from 2000 to 2010 by applying methods of location quotient(LQ), a multiple model, and etc, and predicted changing aspects of suitable cultivation areas from 2015 to 2020. As the result of analysis, I found that there were specialized items which were spatially concentrated and that there were hot-spots which were focused on some areas by items. Additionally, there were suitable cultivation areas which remained stable or changed by them. To discover specialized items and to develop businesses, I have suggested that it is necessary to ensure business project's feasibility including the present conditions, circumstances & potential of specialized items, and etc., and to secure business competitiveness including technology exchange, production cost curtailment, business management based on consumer's needs and building systematic data about achievement and etc.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.101-109
• /
• 1990

The friction welding has more technical and economic advantages than the other welding processes. As this welding process has the characteristics such as curtailment of production time, materials, cost reduction, etc., it has been widely used in production of various mechanical components which have complex shapes. So, this paper deals with optimizing the friction welding conditions and analyzing various mechanical properties of the friction welded joints of torsion bar material SUP9A bar to bar. The results obtained are summarized as follows; 1) The quantitative relation between heating time($t_{1}$, sec) and total upset(U, mm)can be obtained. The empirical formula obtained is ; U = 3.29$t_{1}$ + 1.6 2) The tensile strength($\sigma_{t}$, kgf/$mm^{2}$) of friction welding joints as post weld heat treated(PWHT) depends upon heating time($t_{1}$, sec) quantitatively and the empirical formula obtained is ; $\sigma$= -5.1$t_{1}\;^{2}$+44.90$t_{1}$+45.2 3) It is certain that the optimum condition for friction welded joints of SUP9A steel bars of diameter 14.5mm is, considering on various properties such as tensile strength, torsional strength, impact energy and strain of the joints after PWTH ; n = 2000rpm, $P_{1}$=8kgf/$mm^{2}$, $P_{2}$=20kgf/$mm^{2}$, $t_{1}$=4sec, $t_{2}$=3sec 4) The tensile strength, torsional strength and hardness were increased with the increased with the increasing carbon equivalent, but toughness was decreased.

• 패션비즈니스
• /
• 제6권1호
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• 한국축산시설환경학회지
• /
• 제4권1호
• /
• pp.21-28
• /
• 1998

This study was carried out to estimate the economic impacts on operation cost and curtail the bulking agent between two kinds of plants in swine farms. Bulking agents and Plants have a variety of roles in the fields of the composting for livestock manure and also represent an economic problem in terms of plant operation costs and compost production. Two farms which have rotary(size of reactor : 10${\times}$35${\times}$1.5m) or bucket(size of reactor : 10${\times}$68${\times}$2m) plants were used for 24 weeks for bucket conveyor system, which are composed of refilling rice hull as a bulking agent every 3 weeks till decreasing volume, for 4 weeks for rotary conveyor system, which has continuous compost production system without refilling rice hull, respectively. Composts was produced in 24 weeks in the bucket conveyor system, in 4 weeks in the rotary conveyor system, respectively. The results are as follows : 1. The tissue change of Rice hull at the composts of 45 days pursuant to composting steps was more crumbling in bucket conveyor system than in rotary conveyor system. 2. Microbial counts of the final composts for safety and quality showed that total bacteria counts was 1.01${\times}$108 cfu/g in bucket conveyor system, 2.82${\times}$108 cfu/g in rotary conveyor system, Salmonella was 0.3${\times}$102 cfu/g in bucket conveyor system, 7.6${\times}$102 cfu/g in rotary conveyor system, colifom bacteria was 0.5${\times}$106 cfu/g in bucket conveyor system, 1.5${\times}$106cfu/g in rotary conveyor system, fungi 1.24${\times}$106 cfu/g in bucket conveyor system, 0.01${\times}$106 cfu/g in rotary conveyor system, respectively. However, Any system used in this trial could not be met the regulation of A grade compost of EPA and USA. 3. C:N ratio according to the composting was more rapidly changed in bucket conveyor system with 64.5 of 5 days compost to 25.4 of final products than in rotary conveyor system with 26.7 of 5 days compost to 25.9 of final products. 4. Based on the mechanical characteristics of plants used in trial and compared with Rotary conveyor system, the Bucket conveyor system in which has 0.72 ㎥/㎥ of bulking agent capacity per slurry could be curtailed 1.78 ㎥of rice hull for disposal of waste, 1㎥. It was proper facilities to produce composts quantitative in Rotary conveyor system, and to treat waste quantitative and obtain good results in compost quality in Bucket conveyor system.