• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.269-273
• /
• 2001

Semiconductor wafer fabrication is a business of high capital investment and fast changing nature. To be competitive, the production in a fab needs to be effectively planned and scheduled starting from the ramping up phase, so that the business goals such as on-time delivery, high output volume and effective use of capital intensive equipment can be achieved. In this paper, we propose Stand Alone layout and In-Line layout are analyzed and compared while varying number of device variable changes. The comparison is performed through simulation using ProSys; a window 98 based discrete system simulation software, as a tool for comparing performance of two proposed layouts. The comparison demonstrates that when the number of device variable change is small, In-Line layout is more efficient in terms of production quantity. However, as the number of device variable change is more than 14 titles, Stand Alone layout prevails over In-Line layout.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.133-141
• /
• 1997

In the process of car body design, various surfaces are generated from the given boundary curves. Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface or to use the different generation method based on the evaluation results. This capability is very important because the defect of the surface quality detected in the production stage will require the rework of the dies and will cause a big loss in cost and time. A method of surface interrogation using reflection line is introduced. In this paper, We applied reflection mapping to generate reflection lines on the trimmed NURBS surface. Since reflection lines are obtained from reflection mapping that uses simple and physically acceptable mapping algorithm, they can be efficiently used to simulate the reflection test on the real part in the production line.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.362-365
• /
• 1997

In the field of Micro-Mechanics, it has been known diffcult to integrate the micro-machine with sensor and source line for the conventional copper line cnanot be used in compact and small size. We developed a system to make thethin copper film as a connect line on the poyurethane pipe (2mm in diameter) by the evaporation technique. This system consists of an evaporation chamber two long branches, substrate hoider and a Linear-Rotary motion feed feedthrough. The results showed that thin copper film coated polyurethanc pipe could be applied th the small medical devices such as the micro active endoscope.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04b
• /
• pp.27-31
• /
• 2002

Samyang Genex succeeded in commercialization of anticancer agent-paclitaxel by plant cell culture technology. The core technology of Samyang Genex relating paclitaxel production includes cell line development, cell line preservation, cell culture, scale-up technology, and purification technology. On the basis of the research, Samyang Genex built the factory operated by CGMP (current good manufacturing practice). The $paclitaxel-Cenexol^{TH}-is$ commercially available in Korea, and it will be launched to world market including USA after approval of US FDA.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.383-389
• /
• 1999

The purpose of this study was to investigate the effects of alloying and rolling condition on the mechanical properties and to develop high strength line pipe steels with good toughness. Tests were carried out by the laboratory experiments followed by mill trials and mass production. It was found that a small addition of microalloying elements, such as Nb, V with Mo or Ti remarkably increased the strength and toughness of hot strips. The optimum condition of thermomechanical rolling on low carbon microalloyed steel improved the toughness through the formation of a fine and uniform microstructure. Based on this mill trials following the fundamental research, the production technology of line pipe steels, grade X70∼X100 with high toughness, has been established. These grade steels exhibit excellent low temperature toughness (vTs= under -80$^{\circ}C$) and sufficient strength in both the base metal and the ERW seam weld position, respectively.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.5
• /
• pp.323-329
• /
• 2009

Auto-makers can only remain competitive by producing high quality vehicles in an efficient way. In designing a production line, one of the most important objectives of digital manufacturing is to verify design errors as early as possible. In terms of the cost and time saving, it is very essential to start the construction of a production line with a proven design which is error-free. Likewise, this paper aims to implement PLC verification using an example. The verification in automobile manufacturing means verifying PLC program, which control automatic devices. In this paper, we built a virtual factory to implement PLC simulation and introduced verification procedure using PLC Studio. Finally, we can prove the availability for the PLC verification.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.59-62
• /
• 2002

Samyang Genex succeeded in commercialization of anticancer agent-paclitaxel by plant cell culture technology. The core technology of Samyang Genex relating paclitaxel production includes cell line development, cell line preservation, cell culture, scale-up technology, and purification technology. On the basis of the research, Samyang Genex built the factory operated by CGMP (current good manufacturing practice). The paclitaxel-Genexol$^{TM}$-is commercially available in Korea, and it will be launched to world market including USA after approval of US FDA.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1313-1320
• /
• 2012

Condition monitoring of the reciprocating compressor is important task. As a traditional method, health monitoring system of refrigerator depends on decision of a skilled person based on his experience. However, the skilled person cannot monitor all the compressors completely. If a sampled compressor is faulty, thousands of compressors manufactured at that place are regarded as faulty compressors. Therefore it is necessary to monitor all compressors in the production line. In the paper real time health monitoring system is developed based on high order time frequency method and artificial neural network. The system is installed in the mass production line. The result of the application has been very successful, and currently the system is working very well on the production line.

• Journal of the Korea Society for Simulation
• /
• v.21 no.4
• /
• pp.11-24
• /
• 2012

We compared a DBR(drum-buffer-rope) system with a CONWIP(constant work-in-process) system in a production line with constant processing times. Based on the observation that a WIP-controlled line production system such as DBR and CONWIP is equivalent to a m-node tandem queue with finite buffer, we applied a max-plus algebra based solution method for the tandem queue to evaluate the performance of two systems. Numerical examples with 6 workstations were also used to demonstrate the proposed analysis. The mathematical analyses support that CONWIP outperforms DBR in terms of expected waiting time and WIP. Unlike the CONWIP case, sequencing workstations in a DBR affects the performance of the system. Delaying a bottleneck station in a DBR reduces expected waiting time.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.9-17
• /
• 2007

Feature based stereo matching is an effective way to perform 3D building reconstruction. However, in urban scene, the cluttered background and various building structures may interfere with the performance of building reconstruction. In this paper, we propose a novel method to robustly reconstruct buildings on the basis of rectangle regions. Firstly, we propose a multi-scale linear feature detector to obtain the salient line segments on the object contours. Secondly, candidate rectangle regions are extracted from the salient line segments based on their local information. Thirdly, stereo matching is performed with the list of matching line segments, which are boundary edges of the corresponding rectangles from the left and right image. Experimental results demonstrate that the proposed method can achieve better accuracy on the reconstructed result than pixel-level stereo matching.