• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.352-357
• /
• 2013

This study estimates the classification criteria which distinguishes the types of omega-3 health functional foods, fish oils and fish oil usages through $^{13}C$-NMR spectra and fatty acids contents analysis. The major fatty acids of omega-3, eicosapentaenoic acid (EPA, $C_{20:5}$) and docosahexaenoic acid (DHA, $C_{22:6}$) are being analyzed. 10 ethyl ester (EE) forms and 10 triglyceride (TG) forms are the most common types of fish oils for 20 omega-3 products. Gas chromatography (GC) analysis generally shows the matching EPA and DHA contents of the products listed on the notation. But EE form contents of EPA and DHA are higher and are more varied than the TG form. Most of the samples of EPA/DHA ratio show different content ratios of indicated on the products when comparing with standards. The $^{13}C$-NMR analysis of EPA and DHA on sn-1,3 and sn-2 carbonyl peak position with fish oil triglycerides display whether the reconstituted triglycerides (rTG) are being confirmed or not. As a result of the 9 TG form, the 10 TG products showed similar values: EPA sn-1, 3; 13.46~15.66, sn-2; 3.00~4.52, DHA sn-1, 3; 2.43~4.40, sn-2; 3.84~6.36. But one product showed lower contents (EPA: sn-1, 3; 5.88, sn-2; 2.86, DHA sn-1, 3; 2.29, sn-2; 5.95) of EPA, thus it can be considered a different type of oil and only matched six products according to the label. This study is intended to provide basic materials which identify the status for the types and quality of omega-3 fish oil products according to fatty acids profiles and the $^{13}C$-NMR spectrum confirmed the location specificity of EPA and DHA.

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.237-241
• /
• 1992

The protease from Halomonas sp. ES 10 was purified by methanol precipitation, gel filtration on Sephadex G-150 and G-200, and ion exchange chromatography on DEAE-Sephadex A-50. The purified enzyme was found to be homogeneous by polyacrylamide gel electrophoresis. The specific activity of purified enzyme was 1,014 units/mg protein, and the yield of the total activity from the culture filtrate was 7%. The optimal temperature and pH for the enzyme activity were $35^{\circ}C$, and pH 11.0, respectively. And the enzyme was stable in the range of $pH\;7.5{\sim}11.0$. The residual activity of the enzyme was 70%, when the enzyme was incubated at $50^{\circ}C$ for 40 min. The Km value of the enzyme was 7.4 mg/ml to milk casein. $Li^+$, $Ca^{2+}$, SDS and Tween 80 were appeared to activators, whereas $Hg^{2+}$ and EDTA to inhibitors. The addition of DFP and PMSF showed the relative enzyme activities of 63% and 107%, respectively, suggesting that the enzyme may not belong to serine type protease. When the alkaline protease was treated with 0.5 M and 1 M NaCl, the relative enzyme activities were 95% and 65%, respectively. This enzyme showed 20% and 15% higher enzyme activity than that of Aspergillus oryzae (Sigma Chemical Company product, P4755) in the presence of 0.5 M and 1 M NaCl.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.190-200
• /
• 2018

This study estimated the marginal production value based on the production function approach to confirm the economic value of industrial water supply projects. For this, we analyzed 4 data sets classified by 11 industry types according to Cobb-Douglas Function, Translog Function, and Translog function with sector dummy variables. As a result, the average industrial marginal product value of the entire industry was 3,217~5,357 won/ton, 2,994~4,569 won/ton and 3,620~5,342 won/ton, respectively. The results by industry type were the largest in furniture and other manufacturing industries and showed the lowest marginal production value in the textile and leather industries. Overall, the results from the Cobb-Douglas function were highly evaluated. And the volatility according to data sets was also analyzed in the Cobb-Douglas function. There have been few studies on the economic value of industrial water compared to domestic water. It is considered that multidisciplinary consensus will be needed through active research in the future.

• Applied Biological Chemistry
• /
• v.39 no.4
• /
• pp.268-273
• /
• 1996

Fundamental data for new type of product development from Lycii fructus was experimentally determined. The chemical composition, and Hunter value changes, optimum extraction, volatile components of extract under different extraction conditions and heat treatment were mainly studied. Results are summarized as follows. The proximate compositions of dried Lycii fructus were water 21.8%, total sugar 27.6%, reducing sugar 15.2%, crude protein 14.29%, crude fat 5.65%, crude fiber 7.48%, and ash 7.98% in percent stale, respectively. Extracted yield on the basic of solid extract was getting increased when more solvent was used for extraction. The most recommendable extraction was 1 to 10 part of sample to solvent ratio. When water was employed as extraction solvent, the highest amount of solid extract was obtained. Extract of Lycii fructus in terms of yields and color was most acceptable when raw sample was treated 8 minute roasting at $180^{\circ}C$ and 60 minute heating at $120^{\circ}C$, respectively. Major volatile components of fresh Lycii fructus were to hexadecanoic acid, methyl linoleate, benzyl alcohol, dimetane benzene by GC/MS. By the roasting of raw sample, the compounds of 2-methyl-2buthenal, 1,4-dimethyl benzene, and benzyl alcohol were reduced. Wheras, methyl thiopropanol, benzene acetaldehyde and ethyl linoleate were slightly increased.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.2
• /
• pp.191-203
• /
• 2011

We conducted a study to investigate milk and dairy products consumption among elementary school students to identify ways to increase their intake of milk and dairy products. We asked 518 students in Seoul to fill out questionnaire. Only 55.6% of the subjects consumed milk daily, and 43.7% of them drank at least 1 cup per day. The frequency and quantity of milk consumption were higher in male students than female students. The majority of the subjects consumed whole milk, and most students(59.5%) preferred flavored milk to whole milk. The reasons given for drinking milk included 'wanting to be tall'(66.1%) and 'for good health'(47.1%), while the main reason given for not drinking milk was stomach pain (68.4%). Records of having an unpleasant experience and upset stomach after drinking milk occurred at a higher rate for those who did not drink milk(84.2%) than for those who did(53.3%). Of the students questioned, 36.9% consumed dairy products other than milk 3~4 times per week, and liquid-type yoghurt(43.8%) and ice cream(35.4%) were the preferred dairy products among students. The reasons given for consuming dairy products were 'good taste'(56.6%), 'good to eat'(46.6%), 'wanting to be tall'(32.4%), and 'for good health' (25.4%). Among those students who did not consumed dairy products, the major reason given was 'family does not eat at home'(33.3%). After consuming the dairy products, 71.4% of participants thought that dairy products did not result in physical improvement. Most students had experienced purchasing milk and dairy products by themselves. When they bought milk or dairy products, the reasons given for making a particular selection were 'shelf-life'(61.6%) for milk, and 'favorite dairy products'(54.1%) for dairy products. According to participants, the factors that need to be considered for milk and dairy product consumption among elementary school students are 'higher nutrition' (60.8%), 'better sanitation'(57.3%), and 'better quality and taste'(55.2%).

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.574-579
• /
• 2008

To develop a yogurt for sensitive consumer such as infants, children or immuno-compromised patients using gamma irradiation, the effects of gamma irradiation on the microbiological, chemical, and sensory quality in a commercial plain yogurt were investigated. No viable coliform bacteria were detected in the sample and approximately a 6 decimal reduction was achieved in the number of total aerobic bacteria by irradiation at 5 kGy. The initial population of lactic acid bacteria observed in the commercial plain yogurt was 8.95 log CFU/g. Gamma irradiation significantly reduced the initial microbial level to 6.47 and 2.85 log CFU/g after irradiation at 1 and 3 kGy, respectively (p<0.05). However, irradiation dose up to 5 kGy could not completely eliminate the lactic acid bacteria in commercial plain yogurt. pH, color, lactose and lactic acid content, and sensory quality were not affected by irradiation treatment and storage. Our results suggest that irradiation can improve the microbial quality of commercial plain yogurt without impairing the physicochemical and sensory quality.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.69-76
• /
• 1998

This study was investigated to determine the effect of additives and ionic strength on the functionality of extracted proteins in preblends in order to use less additive in restructured meat products. Preblends contained the combinations of sodium chloride (NaCl; 0, 4.5, 9.0%), sodium tripolyphosphate (STPP; 0, 2.5, 5.0%), and tetrasodium pyrophosphate (PP; 0, 2.44, 4.88%). The pH values increased linearly with increasing STPP and PP concentrations (p<0.01). In the equivalent ionic strengths, PP was more effective than STPP in increasing pH. Phosphate ions were more effective on total extractable protein (used 1 M NaCl buffer) than chloride ion at equivalent ionic strengths. Solubility was decreased by adding NaCl and increasing total extractable proteins. Meat sulfhydryl contents were high with increasing total extractable proteins. When protein extracts were heated at $65^{\circ}C$, 7 min, meat sulfhydryl contents decreased and surface hydrophobicity increased (p<0.01). However, all protein extracts showed no differences in SDS-PAGE pattern. In conclusion, PP is more effective than STPP in order to use less additive but there was no linear relationship between functionnal improvement and ionic strength.

• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.123-128
• /
• 2008

The Dissolved Organic Carbon (DOC) existing in a water includes both hydrophobic and hydrophilic substances however, most of the discussion focuses on hydrophobic substances. The hydrophobic fraction was easily removed by absorption or coagulation more than hydrophilic fraction. Therefore, control of the hydrophilic fraction is very important in water treatment process. This study is to determine the variation of DOC, the removal efficiency of DOC, and Trihalomethane formation potential (THMFP) after each stage of water treatment process by fractionating Natural Organic Matters (NOM) into hydrophobic and hydrophilic substance. DOC from raw water was fractionated at acidic pH (pH<2) using XAD 8 resin column, into two fraction : hydrophobic substance (i.e. humic substance) adsorbed on XAD 8 and hydrophilic substance which represent the organics contained in the final effluent. THMFP was carried out according to the following set condition: Cl2/DOC=4 mg/mg, incubation at $25^{\circ}C$ in darkness, pH 7 adjust with HCl or NaOH as necessary, and 72hour-contact time. THMs analyzed in this study were chloroform, bromodichloromethane, dibromochloromethan, and bromoform. Sewage was almost evenly split between the hydrophobic (56%) and hydrophilic fraction (44%). But, Aldrich humic substance (AHS) was found to contain less hydrophilics (14%) than hydrophobics (86%). The formation of THMs may depend on the source which is characterized by the composition of organic matters such as AHS and sewage. The THMFP yield of sewage and AHS were assessed as follows. The value of the THMFP reaction yield, AHS $172.65{\mu}g/mg$, is much higher than that of sewage $41.68{\mu}g/mg$. This illustrates possible significant difference in THMFP according to the component type and the proportion of organic matter existing in water source. Apparently AHS react with chlorine to produce more THMFP than do the smaller molecules found in sewage. Water treatment process may reduce THMFP, nevertheless residual DOC (the more hydrophilic substance) has significant THMFP. Further reduction in organic halide precursors requires application of alternative treatment techniques.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.121-129
• /
• 2015

Alginates are found in marine brown seaweeds and in extracellular biofilms secreted by some bacteria. Previously, we reported an oligoalginate lyase from Sphingomonas sp. MJ-3 (MJ3-Oal) that had an exolytic activity and protein sequence homology with endolytic polymannuronate (polyM) lyase in the N-terminal region. In this study, the MJ3-Oal was tested for both exolytic and endolytic activity by homology modeling using the crystal structure of Alg17c from Saccharophagus degradans 2-40T. The tyrosine residue at the $426^{th}$ position, which possibly formed a hydrogen bond with the substrate, was mutated to phenylalanine. The FPLC profiles showed that MJ3-Oal degraded alginate quickly to monomers as a final product through the oligmers, whereas the Tyr426Phe mutant showed only exolytic alginate lyase activity. $^1H$-NMR spectra also showed that MJ3-Oal degraded the endoglycosidic bond of polyM and polyMG (polymannuronate-guluronate) blocks. These results indicate that oligoalginate lyase from Sphingomonas sp. MJ-3 probably catalyzes the degradation of both exo- and endo-glycosidic bonds of alginate.