• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.123-130
• /
• 2004

This paper describes a multiplier architecture optimized for 32 bit RISC processor with 3-stage pipeline. The multiplier of ARM7, the target processor, is variably carried out on the execution stage of pipeline within 7 cycles. The included multiplier employs a modified Booth's algerian to produce 64 bit multiplication and addition product and it has 6 separate instructions. We analyzed several multiplication algorithm such as radix4-32${\times}$8, radix4-32${\times}$16 and radix8-32${\times}$32 to decide which multiplication architecture is most fit for a typical architecture of ARM7. VLSI area, cycle delay time and execution cycle number is the index of an efficient design and the final multiplier was designed on these indexes. To verify the operation of embedded multiplier, it was simulated with various audio algorithms.

• Fire Science and Engineering
• /
• v.4 no.2
• /
• pp.3-13
• /
• 1990

Fire Protection System is facilities that Control the fire by mechanic means. Buildings Over a Certain Scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment the kinds are various. With the development of architecture technique while modern higher buildings are increased. As fire is a first product that human make, it performed many profits and services for our mankind. Sometimes as it is profitable fire or harmful fire, it takes charge of human's life culture. Therefore fire protection system is facilities that control the ]after fire by mechanic means Building over a certain scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment, the kinds are various. With the development of architecture technique while modern Higher buildings are increased high level and fire prevent facilities aren't reached to that level. The object of this study is present the problem which appear from the analysis of place standard for fire protection facility. This study described as a following order. First. We are going to look history of the fire protection system and change course of that with the year and facility. Second, We say the frame system and special nature of the foreign fire prevent Act. Third. We understand the control reality of fire protection system. Fourth. We took out the merit of foreign fire prevent law and the problem of our current domestic system. The placing standard of proper fire protection facilities that be presented from this study are followed next. 1) We have reinforce sprinkler system placing standard for the fire extinguishing and check the spread of fire. 2) We must to be ruled the standard for keeping fire prevention system that are received reality and people's idea. 3) We should prepare lawful basis which can be place fire prevention center. 4) We have to correct the standard of use about complex building without mainuse and we take increase the real effectiveness of this. 5) We ought to match the use of current fire prevention act and the use of architecture law.

• Fire Science and Engineering
• /
• v.5 no.1
• /
• pp.5-14
• /
• 1991

Fire Protection System is facilities that Control the fire by mechanic means. Buildings Over a Certain Scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment the kinds are various. With the development of architecture technique while modern higher buildings are increased. As fire is a first product that human make, it performed many profits and services for our mankind. Sometimes as it Is profitable fire or harmful fire, it takes charge of human's life culture. Therefore fire protection system is facilities that control the latter fire by mechanic means Building over a certain scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment, the kinds are various. With the development of architecture technique while modern higher buildings are increased high level and fire prevent facilities aren't reached to that level. The object of this study is present the problem which appear from the analysis of place standard for fire protection facility. This study described as a following order. First, We are going to look history of the fire protection system and change course of that with the year and facility. Second. We say the frame system and special nature of the foreign fire prevent Act. Third. We understand the control reality of fire protection system. Fourth. We took out the merit of foreign fire prevent law and the problem of our current domestic system. The placing standard of proper fire protection facilities that be presented from this study are followed next. 1) We have to reinforce sprinkler system placing standard for the fire extinguishing and check the spread of fire. 2) We must to be ruled the standard for keeping fire prevention system that are received reality and people's idea. 3) We should prepare lawful basis which can be place fire prevention center. 4) We have to correct the standard of use count about complex building without mainuse and we take increase the real effectiveness of this. 5) We ought to match the use of current fire prevention act and the use of architecture law.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.543-551
• /
• 2015

In this paper, Used on the bridge and ship, investigate the physical relationship of aluminium plate girders(A6082-T6) considering the marine environment. Plate girder will experience the patch loading such as moving load, surcharge in the product life cycle. The ultimate strength of aluminum plate girders subjected to these loads applied multiple numerical model and performed the elasto-plastic large deflection series analysis and was proposed the predicted formula for regression analysis. The predicted formula was shown by the relationship of ultimate strength and slenderness. If the slenderness is low(0-2.3), it causes a 9 % error, and If the slenderness is higher(2.3-4.0), it causes a 1-2 % error. Therefore, the propriety of proposed prediction formular was found to be assess rationally.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.187-195
• /
• 2018

Ship's bottom slamming has been studied by many researchers for a very long time. But still some ships suffer structure damages caused by the bottom slamming impacts. This paper presents a practical computation method of the design impact pressure due to ship's bow bottom slamming. Large heave and pitch motions of a rigid hull ship are simulated by the nonlinear strip method in time domain and the relative colliding velocity between the bow bottom and the water surface is calculated using the simulated ship motions. The bottom slamming impact pressure is calculated as a product of the relative colliding velocity squared and the bottom slamming pressure coefficient that is obtained by modification of the SNAME pressure coefficients based on Ochi's slamming experiments. Not only the bottom slamming pressures but also the required bottom plate thicknesses are calculated and compared with those of the classification society rules. The comparisons show good agreements and it is confirmed that the present method is practically very useful for the bottom structure design against ship's bow bottom slamming impacts.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.333-340
• /
• 2019

Red mud is an industrial by-product produced during the manufacturing aluminum hydroxide (Al(OH)3) and aluminum oxide(Al2O3) from Bauxite ores. In Korea, aproximately 2 tons of red mud in a sludge form with 50% moisture content is produced when 1ton of Al2O3 is produced through the Bayer process. Neutralization of red mud will help to reduce the environmental impact caused due to its storage and also lessen significantly the ongoing management of the deposits after closure. It will also open opportunities for re-use of the residue which to date have been prevented because of the high pH. Moreover, attention to liquefied red mud(LRM) that does not require heating and grinding process for recycling is needed. In this paper, characteristics of compressive strength for cement paste with content of LRM neutralized by nitric acid and sulfuric acid. The results showed that compressive strength of cement paste with neutralized LRM is higher than that of cement paste with LRM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.529-531
• /
• 2022

The 5th generation mobile communication (5G) is being commercialized by major domestic and foreign mobile telecommunication businesses and is spreading to general customers mainly on smart devices such as smartphones, wearables, and IoT. If 4G networks and 5G access equipment were utilized by introducing NSA(None-Stand Alone) technology when 5G was first introduced, recently, 5G convergence services are being realized by gradually expanding evolution to 5G standalone networks through SA (Stand Alone) technology. The purpose of this study is to study a design plan for implementing necessary service-oriented functions from the perspective of communication network users on the configuration of 5G SA equipment based on SBA(Service-based Architecture) mentioned in the 3GPP technical specification document. Through this research, it is expected that companies that need to enter the 5G market can easily access the 5G SA network to develop and supplement specialized 5G convergence services to improve product performance and quality.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2024

As technology advances swiftly and the lifespan of products becomes increasingly short, there is a demand to fasten the pace of research outcomes, product development, and market introduction. As a result, the researchers and developers need a computational experiment environment that enables rapid verification of the experiment and application of research findings. Such an environment must efficiently harness all available computational resources, manage simulations across diverse test scenarios, and support the experimental data collection. This research introduces the design and implementation of an experimental frame based on a microservice architecture. The experimental frame leverages scripts to utilize computing resources optimally, making it more straightforward for users to conduct simulations. It features an experimental frame capable of automatically deploying scenarios to the computing components. This setup allows for the automatic configuration of both the computing environment and experiments based on user-provided scenarios and experimental software, facilitating effortless execution of simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.731-739
• /
• 2017

As Additive Manufacturing (AM), so-called 3D printing technology, has become visualized, its potential for Mass-Customization, production costs and time savings has extended the scope of utilization to the architecture domain. Several cases that produced facilities, building elements and components using 3D printing technology have been announced mainly on the outside. There is also the development of foundation technologies including 3D printing-specific materials and equipment in Korea. As 3D printing technology in the architecture domain is currently in the early stages of adoption, realistic and systematic strategies are needed to advance it to the commercialization stages, considering the current circumstances of the industry. With this background, this study surveyed experts to investigate the status of the perception of 3D printing technology for adoption in domestic architecture industry. 3D printing technology is expected to be commercialized in areas of irregular-shape buildings and interior markets rather than general construction area. 3D printed products expected to be commercialized are limited to the level of building elements and the aesthetic factor is regarded as the most competitive factor. To enhance the possibility of the commercialization of 3D printed products, the 3D printing-specific construction method, related policies and systems are required along with the performance and stability of the materials and equipment.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.499-512
• /
• 2014

Architecture is usually seen as a product of art and technology. However, most historical buildings also exemplify various sophisticated principles of mathematics. Outstanding examples of architecture around the world such as Seokguram, Daewoongjun of Bulguksa, Muryangsujeon of Buseoksa, and the Parthenon provide students with a great opportunity to study their underlying mathematical properties and principles. The activity of identifying and investigating such mathematical principles in historical buildings enables students to realize that mathematics is a practical subject, and thus provides justification for the study and importance of mathematics. For the purpose of this study historical architecture was reviewed with this in mind in order to develop STEAM education materials focused on elementary school mathematics. The result of this study is as follows: first of all, appropriate examples of historical architecture were selected on the basis of the 2009 revised curriculum's content and teaching goals. These involved chapters on 'proportion', 'symmetry', 'movement of figures', 'building blocks', and 'triangles'. Secondly, a meta-analysis was performed on the historical buildings that clearly illustrate mathematical principles. Thirdly, STEAM education materials focused on elementary mathematics using architectural examples were developed which made actual application in classrooms possible. And lastly, surveys of professional groups were conducted to verify whether the produced materials were suitable teaching resources.