• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.10-18
• /
• 2022

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.4
• /
• pp.51-56
• /
• 2022

Purpose: By applying an ultrasonic mechanical device to the liquid fertilizer storage in the pig dropping treatment plant, the initial odor of the odor source is reduced, and the air dilution drainage of the complex odor is fundamentally recognized to facilitate odor treatment on the mechanical and chemical biological treatment devices at the rear. Research design, data and methodology: The odor concentration on the site boundary was measured to confirm the state of reduction. In order to prevent the spread of odor from the collection of the pig dropping treatment plant, it was measured by installing an ultrasonic generator inside the installation wall after installing the sealing wall. Results: The average value of the March and April measurement data remained close to neutral at 8.2 after 8.6 treatment before pH treatment, decreased 97.3% from 462 mg/L before SS treatment to 10.5 mg/L after treatment, and the composite odor was reduced by 85% from 20 to 3 before treatment. It was confirmed that ammonia (NH3) was reduced by 99% from 5.8 ppm to 0.09 ppm, and general bacteria were also reduced by 99% from 3,200 CFU/mL to 57 CFU/mL Conclusion: Applying the ultrasonic air ejector hybrid system and zigzag air complex module development product to resource circulation centers or sewage treatment facilities is thought to reduce inconvenience to residents due to odors caused.

• Journal of the Korean Society for Library and Information Science
• /
• v.4
• /
• pp.43-71
• /
• 1975

Operations research has developed rapidly since its origins in World War II. Practitioners of O. R. have contributed to almost every aspect of government and business. More recently, a number of operations researchers have turned their attention to library and information systems, and the author believes that significant research has resulted. It is the purpose of this essay to introduce the library audience to some of these accomplishments, to present some of the author's hypotheses on the subject of library management to which he belives O. R. has great potential, and to suggest some future research directions. Some problem areas in librianship where O. R. may play a part have been discussed and are summarized below. (1) Library location. It is usually necessary to make balance between accessibility and cost In location problems. Many mathematical methods are available for identifying the optimal locations once the balance between these two criteria has been decided. The major difficulties lie in relating cost to size and in taking future change into account when discriminating possible solutions. (2) Planning new facilities. Standard approaches to using mathematical models for simple investment decisions are well established. If the problem is one of choosing the most economical way of achieving a certain objective, one may compare th althenatives by using one of the discounted cash flow techniques. In other situations it may be necessary to use of cost-benefit approach. (3) Allocating library resources. In order to allocate the resources to best advantage the librarian needs to know how the effectiveness of the services he offers depends on the way he puts his resources. The O. R. approach to the problems is to construct a model representing effectiveness as a mathematical function of levels of different inputs(e.g., numbers of people in different jobs, acquisitions of different types, physical resources). (4) Long term planning. Resource allocation problems are generally concerned with up to one and a half years ahead. The longer term certainly offers both greater freedom of action and greater uncertainty. Thus it is difficult to generalize about long term planning problems. In other fields, however, O. R. has made a significant contribution to long range planning and it is likely to have one to make in librarianship as well. (5) Public relations. It is generally accepted that actual and potential users are too ignorant both of the range of library services provided and of how to make use of them. How should services be brought to the attention of potential users? The answer seems to lie in obtaining empirical evidence by controlled experiments in which a group of libraries participated. (6) Acquisition policy. In comparing alternative policies for acquisition of materials one needs to know the implications of each service which depends on the stock. Second is the relative importance to be ascribed to each service for each class of user. By reducing the level of the first, formal models will allow the librarian to concentrate his attention upon the value judgements which will be necessary for the second. (7) Loan policy. The approach to choosing between loan policies is much the same as the previous approach. (8) Manpower planning. For large library systems one should consider constructing models which will permit the skills necessary in the future with predictions of the skills that will be available, so as to allow informed decisions. (9) Management information system for libraries. A great deal of data can be available in libraries as a by-product of all recording activities. It is particularly tempting when procedures are computerized to make summary statistics available as a management information system. The values of information to particular decisions that may have to be taken future is best assessed in terms of a model of the relevant problem. (10) Management gaming. One of the most common uses of a management game is as a means of developing staff's to take decisions. The value of such exercises depends upon the validity of the computerized model. If the model were sufficiently simple to take the form of a mathematical equation, decision-makers would probably able to learn adequately from a graph. More complex situations require simulation models. (11) Diagnostics tools. Libraries are sufficiently complex systems that it would be useful to have available simple means of telling whether performance could be regarded as satisfactory which, if it could not, would also provide pointers to what was wrong. (12) Data banks. It would appear to be worth considering establishing a bank for certain types of data. It certain items on questionnaires were to take a standard form, a greater pool of data would de available for various analysis. (13) Effectiveness measures. The meaning of a library performance measure is not readily interpreted. Each measure must itself be assessed in relation to the corresponding measures for earlier periods of time and a standard measure that may be a corresponding measure in another library, the 'norm', the 'best practice', or user expectations.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.5-9
• /
• 2014

Purpose - The purpose of this study was to compare and contrast the applicability and effectiveness of both teukyakmeip contracts of Korea and consignment contracts of the United State to demonstrate the effectiveness and practicability of teukyakmeip in Korea. These are popular contract agreements between large retailers and their suppliers and vendors. In recent years, teukyakmeip was critically examined and scrutinized by the politicians, the media, and the public of Korea. Consequently, this paper focusesheavily on identifying and analyzing different types of contract agreements between large retailers and their suppliers that currently exist in Korea and compares and contrasts those analyzed contract agreements with teukyakmeip. The article also comparesand contrasts teukyakmeip with the consignment agreements of the United States to identify similarities and differences. Research design, data, and methodology - This study is a descriptive study and has used personal interviews to collect and analyze the data. This study also fits the definition of the case study wherein it is entirely focused on investigating a real-life event: analyzing and examining contract agreements in the distribution industry. Both randomly selected management and vendor representatives from the three major department stores, Lotte, Hyundai, and Shinsegae, in Korea were interviewed between July and September 2013. The analysis of the consignment agreement was conducted based on existing secondary data. Results - Although the evidence of the abuse of teukyakmeip and consignment by large retailers from both countries clearly exists, the findings suggestthat both contract agreements would remain as the most relevant and effective legal contracts between large retailers and their suppliers. Based on the comparisonanalysis of teukyakmeip and consignment, both contracts indicated that suppliers are fully responsible for inventory and inventory management. If sales person is necessary for promoting special product, then suppliers are responsible for providing a sales person and their wages under both contracts. However, American department stores, those located outside urban area, tend to use their own employees to perform special product and sales promotion. The retailersare fully responsible for any interior or floor design or redesign of the retail store to accommodate the products from vendors under consignment; however, both suppliers and retailers share the cost of designing and redesigning the interior to accommodate vendors'products under teukyakmeip. Suppliers are responsible for pricing and supplying the quantity of the products under both agreements. Both contracts allow special sales commission as long as vendors agreed. Vendors use this special commissionto introduce their new products or apply market penetration strategy. Conclusions -The findings of this study showed the changing pattern of contract agreements between large retailers and their suppliers from both countries. Furthermore, this study evidently generated policy implications of teukyakmeip which recently became the major social issue in Korea and attracted many policymakers to gain political points by criticizing the teukyakmeip system and the large retailers. The findings of the study would be valuable to policy makers in making appropriate decisions and to large retailers and vendors in making beneficial agreements. The major implication of this study is that teukyakmeip and consignment agreements include very similar or almost identical characteristics, and they are popular among department stores and suppliers. The issue of abolishing teukyakmeip in Korea needs to be examined cautiously because teukyakmeip is the best one available at the moment, and the study suggests that no one benefits from abolishing this system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2012

Recently the youth starting up a business has become a buzzword. Business plan is a fundamentals in starting up a business. Therefore, in this study, I investigated the business planning behavior of university students in Korea. Especially, I investigated whether university students in Korea dealt with business plan inside and outside or not, and examined university students' thought whether corporate performance is related to business plan or not, and if any, how closely they are. Meanwhile, existing studies and books are arguing that there is a high correlation between business plan and corporate performance, however, there are not many domestic and/or foreign studies that analyzed it empirically. In order to find an answer to this problem, this study was approached empirically. First, the components of business plan were selected through an extensive literature review including existing researches and through factor analysis, I classified them into the five factors of product management, product development, management support system building, organizational management and macro planning. Also, I classified corporate performance into quantitative and qualitative performance, and investigated the influences of business plan factors on those performances. As a result, I found belows. First, university students in Korea thought that the business plan components affected the quantitative and qualitative performances of corporate positively. Second, Korean students had high interests in starting up a business and wanted to run a service business but had almost no experience of business planning. Whilst, Foreign students had relatively high interests in starting up a business and experiences of business planning. They wanted starting up in various industry also. Meanwhile, I did't find the gender differences in those aspects. In this study, I empirically investigated the relation between business plan components and corporate performances in the university students' view, not that of company. So I believe that this study can shed lights on the direction of effective starting up education for increasing the success rate of youth starting up a business.

• Journal of Service Research and Studies
• /
• v.6 no.2
• /
• pp.23-35
• /
• 2016

Firms should seek greater profits and corporate growth through new businesses. New businesses contribute realizing creative economy that creates good jobs, and expanding the company by securing new markets and creating new profits and growth. However, new business is risky management decision-making to have a high failure rate because it involves the adaptation of new business environment and the burden of new investments, including the uncertainty of success in business. Therefore, innovation strategies play important roles for the new business entry, using product innovation, process innovation, business model innovation, disruptive innovation, and strategic innovation, etc. and company will get huge economic results by pushing them into successful business. It is essential that innovation strategy and IT development strategy along with business strategy of a firm are linked, and their strategic alignment is considered to be a critical success factor for new business success. Hyundai Heavy Industries(HHI) pursued marine engine business for the development of precision machinery industry and shipbuilding industry of Korea, and the company recognized the importance of new business strategy, innovation strategy, and IT strategy inter-linked, and pushed strategic alignment boldly. As a result, HHI won the competition in European and Japanese engine manufacturers and climbed into the world's largest engine manufacturer. This study suggests investigating and analyzing a case that HHI succeeded in marine engine business expansion using strategic innovation strategy as a way of the introduction of CNC machine tools and the development of HEMAPT system.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.51-58
• /
• 2013

Purpose - Nowadays, more than ever before, fierce competition, deep market segmentation, short product life cycles, and intensifying customer needs are putting increasing pressure on franchise's organizations to satisfy their customers by creating market-oriented relationships with and enhancing their market knowledge of them. One way that this might be achieved is by establishing deep ties (i.e., job commitment and job satisfaction) with their employees. Therefore, the purpose of this study is to examine how two important constructs of franchises' strategic efforts, LO (learning orientation) and RMO (relationship marketing orientation), affect job satisfaction, given the mediating role of job commitment. A franchise system comprises a set of contractual arrangements by which mutual obligations are performed. An organizational learning goal motivates employees to improve their abilities and master the tasks they perform. Relationship marketing, in addition, is to identify, establish, maintain, and enhance relationships with customers and other stakeholders to ensure that the objectives of all parties are met and this is done through the mutual exchange of promises. In a relationship marketing orientation, then, a firm creates, maintains, and enhances a strong relationship with its customers by sustaining long-term ties. This study was designed to examine the evolution of various theoretical approaches to franchise systems in order to determine whether theories about firms have significantly affected the franchise system. To this end, the authors developed a structural model consisting of several constructs. Previous studies have suggested that franchises' learning and relationship marketing orientations are important occupational immersion dimensions driving job satisfaction. Research design, data, methodology - We empirically tested a process of how the learning orientation and the relationship marketing orientation influence job commitment and job satisfaction using survey data drawn from 150 responding franchisees who were interviewed about their individual tendencies. Results - The results of this study provide empirical evidence that learning orientation, relationship marketing orientation, and job commitment all influence franchisees' job satisfaction. The results of this study indicate that, first, learning orientation had a significant effect on job satisfaction; second, relationship marketing orientation was positively related to job commitment; third, job commitment had a significant effect on job satisfaction. We also found that relationship marketing orientation and job satisfaction were mediated by job commitment. Conclusions - The findings of this study confirm the importance of learning orientation and relationship marketing orientation in maintaining a positive marketing relationship between franchiser and franchisee from to the perspective of the market. This indicates that franchiser support such as educational programs provided by the franchiser will help franchisees attain higher business management achievement and satisfaction. Moreover, a positive relationship between franchisees and consumers can be maintained through tie effects. Our findings also suggest that learning orientation plays a critical role in job satisfaction within the franchise system.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.177-217
• /
• 2018

This study examines the case of living lab applied in the R&D initiatives for solving societal problems and challenges. It discusses how to use the living lab in national R&D projects. The analyzed cases are 'Develop portable fundus camera for eye disease screening test to resolve health inequalities' and 'Auto-sensing integrated system development in rural pedestrian crosswalk'. As a result of the analysis, both cases were designed as a user participatory R&D structure by utilizing living lab. In other words, living lab has operated as a system that evolves technology-products-services into an infrastructure. It can realize final demand specification, product, service improvement and demonstration through continuous interaction of end users. As a result of the case analysis, the following policy tasks can be derived. First, living lab is a new concept and it is in the early stage of implementation in Korea. Therefore, it is necessary to monitor and evaluate living lab experiments and build suitable models for Korean society by sharing cases and achievements. Second, the strategic niche management are necessary for the introduction of living lab. Third, living lab can be used as a tool to transform the existing technology acquisition centered innovation policy to the policy for customer needs and problem solving. Fourth, there is a need for flexibility and adaptability in strategy and system to correct errors that appear in the living lab processes.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.33-41
• /
• 2012

BIS is an arrival guidance system which is able to supply passengers with bus service condition via Kiosks at a bus stop, internet and mobile service through pinpointing bus location in real time. It is very significant to improve the quality of traffic information by quality control of GIS-based bus network so as to maintain navigational information and to implement reliable BIS. Therefore this study aims to build criteria to quantitatively evaluate data quality of the product in accordance with the process in bus network data and to suggest guideline of quality control. To achieve this, we have categorized geometric and logical errors occurring during constructing bus network database by giving a specific case study on TAGO and set up sectional guideline and procedures to examine database for systematic and coherent quality control management. Proceeding from what has been said above, the outcome of our research leads to quality guarantee for objective and reliable bus network database and is fully expected to bring benefit of providing a more accurate public transportation information and improving reliability of BIS through preventing a variety of errors in system operation in advance.