• 품질경영학회지
• /
• 제37권3호
• /
• pp.83-93
• /
• 2009

This study proposes a stepwise approach to product safety management(PSM), of which roadmap consists of five phases. ISO 9001 QM model is assumed as the first-phase model and each higher-phase model is built by adding a corresponding module to the lower one. In the phase order, those modules are CCMS, a failure to warn, manufacturing defect and design defect. The progress in PSM of a domestic food company is discussed.

• 대한핵의학회지
• /
• 제10권1호
• /
• pp.1-14
• /
• 1976

The etiologic role of renin-angiotensin system and sodium-volume status in the pathophysiology of various forms of hypertension was investigated. Plasma renin activity (PRA) was measured by radioimmunoassay, while sodium-volume status was evaluated by the determination of total exchangeable sodium(NaE) using isotope dilution method. The subjects consisted of 25 controls, 24 patients with essential hypertension, with chronic renal failure (13 with hypertension, 9 without hypertension) and with malignant hypertension. The results were as follows: 1. An inverse correlation between NaE and PRA was noted in control subjects (r=-0.598, p<0.001) and normal renin essential hypertension(r=-0.551, p<0.05) and the chronic renal failure with hypertension. (r=-0.790, p<0.001) 2. NaE increased markedly the in chronic renal failure with hypertension ($66.9{\pm}8.69mEq/kg$ of LBM, p<0.001) and the chronic renal failure without hypertension ($54.9{\pm}9.28mEq/kg$ of LBM, p<0.05), while mild increase was noted in malignant hypertension ($51.7{\pm}6.24mEq/kg$ of LBM, 0.05$50.1{\pm}7.24mEq$) as well as in its renin subgroups.(p>0.1) 3. Absolute value of PRA was not deviated significantly from control group ($2.53{\pm}1.416ng/ml/hr$) except in malignant hypertension ($6.09{\pm}2.042$, p<0.001). But PRA was inappropriately high in relation to prevailing NaE in the chronic renal failure with hypertension (eleven of thirteen patients) and malignant hypertension (ten of fourteen patients), while PRA variatiation was within physiologic range in the chronic renal failure without hypertension. 4. The NaE-PRA product was markedly increased in the chronic renal failure with hypertension ($514.4{\pm}42.10$, p<0.001) and in malignant hypertension ($442.7{\pm}55.03$, p<0.001), while moderately increased NaE-PRA product was noted in the chronic renal failure without hypertension ($402.6{\pm}59.67$, p<0.001). No significant difference in NaE-PRA product was noted in essential hypertension ($354.4{\pm}62.38$, p>0.1). It is suggested that renin-angiotensin system plays a predominant role in the pathogenesis of malignant hypertension and in hypertension of chronic renal failure, though sodium retention is also contributing factor. PRA variation in essential hypertension does not appear to be associated with any consistent change in Na-volume status, suggesting the existence of another mechanism in the genesis of hypertension and PRA variation.

• 한국조리학회지
• /
• 제11권3호
• /
• pp.18-39
• /
• 2005

There are various factors to determine success and failure of new product development. Among them one of the most important factors for success will be strategic management of development process for a new product. First the development process for a new product in domestic restaurant business is improvement of existing product quality or extension of a product line. Second, the study found that there is a strong relationship between the development strategy.for a new product and its outcome. The more focused a product becomes in cost efficiency and customer relations, the better reflected the financial and non financial outcome can be in analysis. Third, financial outcome tends to be considered more than non financial outcome on deciding success of the new product development. Fourth, the study indicates that there is a direct relationship between financial non financial outcome analysis and success of new product development.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.136-142
• /
• 2016

The FMEA is a widely used technique to pre-evaluate and avoid risks due to potential failures for developing an improved design. The conventional FMEA does not consider the possible time gap between occurrence and detection of failure cause. When a failure cause is detected and corrected before the failure itself occurs, there will be no other effect except the correction cost. But, if its cause is detected after the failure actually occurs, its effects will become more severe depending on the duration of the uncorrected failure. Taking this situation into account, a risk metric is developed as an alternative to the RPN of the conventional FMEA. The severity of a failure effect is first modeled as linear and quadratic severity functions of undetected failure time duration. Assuming exponential probability distribution for occurrence and detection time of failures and causes, the expected severity is derived for each failure cause. A new risk metric REM is defined as the product of a failure cause occurrence rate and the expected severity of its corresponding failure. A numerical example and some discussions are provided for illustration.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.11-16
• /
• 2013

This paper presents a study on the analyzing reliability of smoke fire detector using accelerated life test. In general, the smoke fire detector is broken by dust which flow in smoke detection chamber. In order to conduct accelerated life test of smoke fire detector dust is set accelerated factor in this paper. The dust is fly-ash which is test particle 5th regulated by KS A 0090. The dust accelerated level is 60 g, 180 g and 360 g and failure time is measured by smoke sensitivity testing. It is considered to failure of detector if detector don't operate within 30 secconds when subjected to an air stream having a velocity of 20 cm/s~40 cm/s containing smoke with a concentration of 15% of rate of light-response of 1 m. The goodness of fit test and mean life prediction conduct using the failure time. The result show that life distribution fits the weibull distribution for failure time data and the mean lifes calculate 22.5 year in domestic product and 14.7 years in overseas product applied dust stress only.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.63-68
• /
• 2006

This research presents the reliability analysis of the pneumatic actuator within the tape feeder that is used to transfer the correct force to linked parts during l.0E+7 cycles. First, the degradation analysis for thrust and air leakage is executed to obtain the failure data of a product based on its performance over time. Second, once the parameters has been calculated using the weibull 2-parameter distribution and MLE(Maximum Likelihood Estimation), information related to life such as reliability, failure rate, probability density function is estimated. Finally, MTTF(Mean Time To Failure) and $B_{10}$ life of actuators are calculated. MTTF means the mean life at the confidence level and $B_{10}$ life refers to the time by which 10% of the product would fail. In this study, failure causes and solutions are examined using the reliability analysis.

• 한국안전학회지
• /
• 제38권5호
• /
• pp.43-50
• /
• 2023

With the advent of industrialization, consumers and end-users demand more reliable products. Meeting these demands requires a comprehensive approach, involving tasks such as market information collection, planning, reliable raw material procurement, accurate reliability design, and prediction, including various reliability tests. Moreover, this encompasses aspects like reliability management during manufacturing, operational maintenance, and systematic failure information collection, interpretation, and feedback. Improving product reliability requires prioritizing it from the initial development stage. Failure mode and effect analysis (FMEA) is a widely used method to increase product reliability. In this study, we reanalyzed using the FMEA method and proposed an improved method. Domestic railways lack an accurate measurement method or system for maintenance, so maintenance decisions rely on the opinions of experienced personnel, based on their experience with past faults. However, the current selection method is flawed as it relies on human experience and memory capacity, which are limited and ineffective. Therefore, in this study, we further specify qualitative contents to systematically accumulate failure modes based on the Failure Modes Table and create a standardized form based on the Master FMEA form to newly systematize it.

• 응용통계연구
• /
• 제8권1호
• /
• pp.89-104
• /
• 1995

사용현장에서의 고장데이터는 미리 정해진 보증기간동안 고장이 발생한 제품으로부터 얻어지는 고장시간, 고장원인, 설명변수값과 보증기간동안 고장나지 않는 제품 중 일정비율을 추적조사하여 얻은 설명변수 값들로 구성된다. 사용현장에서 얻어지는 이와 같은 데이터를 이용하여 제품수명분포의 모수가 설명변수와 대수선형관계일 때, 수명분포의 모수에 대한 의사(pseudo) 최우추정량을 구하고 그 점근성질을 규명하였으며, 고장원인별 제품수명이 와이블분포를 따를 때의 의사최우추정량과 점근분산을 구하였다. 제품의 보증기간이 달력시간이고 제품의 고장이 운영시간에 의존하는 경우와 제품의 보증이 달력시간과 운영시간의 혼합인 경우의 분석방법도 제시하였다. 또한 모의 실험을 통하여 추적조사비율에 따른 효과를 알아보았다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권3호
• /
• pp.165-174
• /
• 2013

Thruster break for aerogenerator performs a role that is stopping the rotor in case of emergency such as strong wind, system abnormality or maintenance check. In this study, failure analysis and test evaluation on the thruster break for aerogenerator are proposed, and the entire process to improve reliability of the product through design improvement is presented. The typical failure case is fatigue and wear, and failure cause on these are identified and improvement plan is presented. Lastly, reliability improvement is established to analyse test results before after the life test.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.23-29
• /
• 2018

The objective of this paper is to evaluate the reliability of a volute pump and presents test results through performance and life tests. The performance and life test methods were presented by analyzing the failure modes of the volute pump. Zero failure test time was calculated to evaluate the reliability of the volute pump and then, the test was performed under accelerated conditions. The test was also carried out to check the failure modes of the field conditions. This study can be provided to improve the product reliability through failure analysis of the volute pump. And failure cause of typical failure case has been investigated and improvement design has been presented. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the volute pump.