• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.67-77
• /
• 1988

Quality Assurance is a system of activities whose purpose is to provide assurance that the over all quality control job is in fact being done effectively. In this paper, we tried to develop the fundamental quality assurance procedures that can be applicable to the new-product design stage, to the production stage and to the after-sales stage of the production system.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.457-463
• /
• 2013

Purpose: For effective quality assurance activities, BOM-based quality assurance method is presented. This study introduces various BOM conversions such as Q-BOM, T-BOM, and S-BOM based on M-BOM structure. Methods: Product quality control via Q-BOM manages inspection/audit information, overall supply-chain of product, part requirements, and inventory status. T-BOM manages part traceability, and S-BOM enables statistical control over key process and parts at various hierarchy levels. Results: Quality plan template was developed based on the study results of BOM system including Q-BOM, T-BOM, and S-BOM. Conclusion: Through BOM(Q-BOM, T-BOM, and S-BOM) study and development of quality plan template, more systematic and comprehensive quality management plan is achieved.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.3
• /
• pp.91-97
• /
• 2023

The purpose of this research is to apply the regional development attractiveness of the national level determined in the previous study to the city and county level of Chungcheongnam-do. We verified results with the population change of the floating population data. In order to measure regional development attractiveness in 2020, Chungcheongnam-do's integrated air environment index and per capita gross regional product were gathered. Population movement data over the past five years have been used to analyze population changes in the floating population data. Regional development attractiveness depended on the data of GDP per capita, which had a large difference between the maximum and minimum values. The rate of increase or decrease in population change by city and county in Chungcheongnam-do over the past five years has changed significantly since 2021 and characteristics of each group were grouped into four groups. Based on the environment and economic feasibility of the region, it can be the starting point for a new analysis of Korea's regional development projects and the selection of target sites. Policy suggestions can also be made in spatial plans such as short-term comprehensive plans, long-term comprehensive plans, and development plans. It can be a limit of this research that regional development attractiveness was determined by the relatively large per capita gross domestic product. It is necessary to further develop regional development attractiveness by closely investigating the characteristics of the region, social problems, and emissions of environmentally harmful substances.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.203-216
• /
• 2008

As the service quality measurement has been developed, various fields of service quality measurement have evolved. Especially the development of the mobile communication service and its status has been watched with keen interest. The growth of mobile communications has not developed alone. It evolved with the growth of the mobile communications company and the device manufacturer. This research investigates the mutual relation sand influence between the service quality and the device quality. This is a distinguished phenomenon within the existing research. Currently in Korea mobile devices can be purchased independently of network provider; however, there are also arrangements whereby the manufacturer supplies devices through only selected service providers. The model of service quality measurement is not a simple fragment model for the service quality anymore. It is required to establish the ultimate model for the service quality to determine if the customer differentiates between the device and service quality. Knowing if a customer differentiates between device and service can aid strong brands when deciding which partners to select for collaborative strategies. The aim of this research is to determine the significant difference between the models of service quality measurement based on differing levels of brand awareness.

• Journal of Applied Reliability
• /
• v.6 no.3
• /
• pp.205-212
• /
• 2006

The purpose of this article is about the accelerated product-reliability-test method of the changing colors of mobile products, which are majorly from the frequent touching of sweating fingers. Such problems of changing colors of mobile products have found mostly In metallic paint containing aluminum paste pigments. Also we found that the color of Al Paste is changed by human sweat. Therefore, the accelerated experimental method has been tested as follow: applying the various concentration of lactic acid, which is the changing color components from human sweat, and deeping the testing sample under temperature of $60^{\circ}C$ in dilutelactic acid with water. From the series of tests, the most optimum concentration of lacticacid has been obtained in 10wt% and the sample is observed to be almost same effect as natural changing of colors by human touching after the test. It has been also confirmed from the cross-sectional analysis. In detail, the testing sample has changed its color in 48hr by changing color effect of Alpaste with 10 wt% of lactic acid, and the digit of $\Delta$ E has measured 10.9 after the test.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2012

Recently the market of the food waste disposer has increased. Therefore, many companies in the development of food garbage disposer has been increasing interest. In this study, we used QFD (Quality Function Development) to find out the quality factors for the development of the food waste disposer reflecting the consumer needs. HOQ (House Of Quality) showing the correlation between consumer characteristic and engineering characteristic was written by investigating the consumer needs based on the consumer complaints and survey. In addition, we generated the CTQ (Critical To Quality) reflecting the weighting of the importance of the parts. As the research result, the important quality factors for the food garbage disposer were the grinding capability, drying, and odor emission features. The crushing motor associated with grinding and dehydration appeared as the most important quality factors among the parts. Second thing was the fan motor associated with odor. The findings will be able to contribute to the development of the food waste disposer reflecting the consumer needs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.163-163
• /
• 2009

Viewing angle controllable liquid crystal display (LCD) associated with fringe-field switching (FFS) mode with high image quality is proposed. In the device, one pixel is composed of main and sub pixels, in which adjacent sub pixel is patterned with pixel electrodes direction orthogonal to the adjacent one. In this way, light leakage can be generated in the all viewing angle directions except the normal direction, realizing view angle controllable LCD in both horizontal and vertical directions.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.207-214
• /
• 2003

3D Modeling Solution can reduce projecting error and also make possible to design visually, so that it can minimize human resources. On the other hand, it has defects of operating difficulties caused by too much complex function, thus it consequently prevent user from prompt handling. According to this paper, the developed party S/W will help that user can construct the parts easily, can let everybody use 3D modeling solution readily, and make fast development of new product. This software will carry out prompt development of new product and derive satisfaction of customers from high quality. Also, saving time and expense naturally raise competitive power in consequence.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.257-266
• /
• 2003

3D Modeling Solution can reduce projecting error and also make possible to design visually, so that it can minimize human resources. On the other hand, it has defects of operating difficulties caused by too much complex function, thus it consequently prevent user from prompt handling. According to this paper, the developed party S/W will help that user can construct the parts easily, can let everybody use 3D modeling solution readily, and make fast development of new product. This software will carry out prompt development of new product and derive satisfaction of customers from high quality. Also, saving time and expense naturally raise competitive power in consequence.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.