• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.12-16
• /
• 2007

In this paper, a new method is proposed for tracking the direction-of-arrival (DOA) of the wideband moving source incident on uniform linear array sensors. DOA is estimated by focusing transformation matrices. To update focusing matrices along with new data snap shots, we use the FAST (Fast Approximate Subspace Tracking) method. Present focusing matrices are constructed by previous signal and its orthogonal basis vectors as well as present signal and its orthogonal basis vectors, which are the left and right singular vectors of the inner product of two approximated matrices. Simulation results are shown to illustrate the performance of the proposed method.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.235-236
• /
• 2001

유전자 분석 기술은 biomedical analysis를 위해 일반적으로 고체 상에 고정화된 DNA 분자를 이용한다. 이 센서의 검출능력은 주로 capture probe의 서열뿐만 아니라 oligonucleotide의 고체 상에 고정화 방법에 달려있다. 본 연구에서는 glass 표면에 DNA 분자를 고정화시키는 방법과 PCR product를 정제하지 않고 직접 검출할 수 있는 DNA probe assay 방법을 개발하였다.

• 품질경영학회지
• /
• 제32권1호
• /
• pp.113-129
• /
• 2004

The reliability of the product can be improved by making the product less sensitive to noises. Especially, it Is important to make products robust against various noise factors encountered in production and field environments. In this paper, the phenomenon of degradation assumes a simple random coefficient degradation model to present analysis procedures of degradation data for robust experimental design. To alleviate weak points of previous studies, such as Taguchi's, Wasserman's, and pseudo failure time methods, novel techniques for analysis of degradation data using the cross array that regards amount of degradation as a dynamic characteristic for time are proposed. Analysis approach for degradation data using robust experimental design are classified by assumptions on parametric or nonparametric degradation rate(or slope). Also, a simulation study demonstrates the superiority of proposed methods over some previous works.

• 품질경영학회지
• /
• 제7권2호
• /
• pp.22-28
• /
• 1979

The problem considered in this paper is to select the vital factor effect to the product quality through the experimental design and analysis of response surface, so as to control the quality improvement of industrial product. In this time, even through the mathematical model is unknown it could be applicable to control the quality of industrial products and to determine optimum operating condition for many technical fields, particulary, for industrial manufacturing process. When a set of data is available from an experimental design, it is often of interest 1:0 fit polynominal repression model in independent variables (eg, time, temperature, pressure, etc) the optimize the response variable (eg. yield, strength etc). This paper proposes a method known to obtain the optimum operating condition, and how to find the condition by using table of orthogonal array experiments, and optimization methodology of statistical model. A criterion can be applied determining to optimum operating conditions in manufacturing industry and improving the fit of response surface which may be used for prediction of responses and quality control of industrial products.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.527-534
• /
• 1987

This paper proposes a new syndrome-testable design method for large MOSPLA's. In the conventional syndrome test method, the testing array circuit for testability is added but it has the defect that the circuit gives effect on the normal operation of the basic PLA circuit. Therefore, by adding the shift registers to the product lines of the basic MOSPLA's this defect is eliminated and the number of test patterns is decreased. In order to reduce the number of fault free syndromes to be predetermined, also, one output line, which is connected to all product lines is added. Therefore the number of output lines be observed is decreased. And the analytical method to compute fault free syndromes is presented. By unsing this method, the time and the effort to compute the syndromes are decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1590-1592
• /
• 2009

The ubiquitous nature of large area TFT-LCD televisions are truly one of the major success stories of consumer electronic products for the $21^{st}$ century. It is the industry's ability to lower prices over the years that have made TFT-LCD television an affordable option for the majority of consumers. TFT-LCD equipment manufacturers have played a major role these cost reduction efforts. Increasing requirements for high process quality like for eg UHD panels need to be met simultaneously with the demand of an highly productive and reliable equipment. AKT provides an excellent PVD product by improving performance and cost of ownership (CoO) for Gen8.5 and beyond.

• 산업공학
• /
• 제5권1호
• /
• pp.25-34
• /
• 1992

A study to analyze and solve inherent problems of a pilot cola machine has been presented in this paper. The product considered in this study involves at least 16 variables(factors) which simultaneously affect the product performance. For this multi-variate statistical problem, we first carefully examined their relationships and selected four variables considered as the most important. We have taken Taguchi's parameter design approach, specifically the $L_8\:(2^7)$ orthogonal array, and determined the optimal levels of the selected variables through the analysis of the experimental results. Finally, we conclude this study with providing general comments drawn from the analysis and verification experiments.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.15-24
• /
• 1998

In this research. we have proposed a new technique to determine .the combination of design parameters for the process design of a hot forged product using artificial neural network(ANN) and statistical design of experiments(DOE). The investigated problem involves the adequate selection of the aspect ratio of billet, the ram velocity and the friction factor as design parameters. An optimal billet satisfying the forming limitation, die filling, load and energy as well as more uniform distribution of effective strain, is determined by applying the ability of artificial neural network and considering the analysis of mean and variation on the functional requirement. This methodology will be helpful in designing and controlling parameters on the shop floor which would yield the best design solution.

• 천문학논총
• /
• 제27권1호
• /
• pp.1-16
• /
• 2012

In this paper, we describe the installation of VLBI Correlation Subsystem (VCS) main product and its performance at the Korea-Japan Correlation Center (KJCC). The VCS main product was installed at KJCC in August 2009. For the overall performance evaluation of VCS, playbacks, Raw VLBI Data Buffer (RVDB) system, and Data Archive (DA) system were installed together. The VCS main product was connected between RVDB and DA, and the correlation results were put into the DA to confirm the normal operation of VCS 16 station mode configuration. The evaluation test was first performed with 4 station mode, same as the factory test of VCS main product. Based on the results of 4 station mode, the same evaluation test was conducted for 16 station mode of VCS. We found that the correlation results of VCS were almost similarly compared to those of the Mitaka FX Correlator. Through the test results, we confirmed that the problems such as spectrum errors, delay parameter processing module and field programmable gate array errors in antenna unit, which were generated at the factory test of VCS main product, were clearly solved. And we verified the performance and connectivity of VCS by obtaining the expected correlation results and we also confirmed that the performance of VCS was sufficient for real VLBI observation data in both 4 and 16 station modes.

• Journal of Plant Biotechnology
• /
• 제2권3호
• /
• pp.157-163
• /
• 2000

Optimization of chemicals in the large scale sea water medium and inoculum for biomass and natural colourants production in the marine cyanobacteria, Phomidium tenue BDU 46241 (phycoerythrin producer) and P.valderianum BDU 30501 (phycocyanin producer) was carried out by experiments in L8 orthogonal array. Mathematical analysis revealed the significance of these factors. The factor(s) that critically control the yield varied with the organism and the end-product further, the desirable level of these factors between the normal and a higher level tested was identified and improved media were evolved. In both cyanobacteria, higher level of $K_2$$HPO_4$, $NaNO_3$ and inoculum with normal level of ferric ammonium citrate was found to be desirable for biomass production and additionally, higher level of $MgSO_4$ for pigment production. The level of other factors varied with the organism and the end-product. Confirmation experiments showed that the clues obtained based on mathematical experimentation are valid. In P.tenue, the medium optimized for biomass production increased the yield of biomass by 495% and the medium optimized for phycoerythrin production increased the yield of biomass by 408% with 30% increase in phycoerythrin content of the biomass. Similarly in P.valderianum, the medium optimized for biomass production increased the yield of biomass by 224% and the medium optimized for phycocyanin production increased the yield of biomass by 143% with 44% increase in phycocyanin content of the biomass.