• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.112-119
• /
• 2011

This paper is concerned with the measurement of static and dynamic displacement by image processing(IP) and study for prediction method of velocity and acceleration. To measure the displacement visually, the measurement system consists of a telephoto zoom camera, CCD(charge coupled device) image device and a computer. The specific target on the white board is used to calculate the displacement of the structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the pixel-size of image. In this paper, we developed for the displacement measurement using the image processing method. The proposed method enables us to measure the vibration displacement, velocity and acceleration directly without any contact. The current resolution for the displacement measurement can be seen from the results.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.131-138
• /
• 2014

This paper is on a stereo acoustic echo canceller with the blind signal separation for post processing. The convergence speed of the stereo acoustic echo canceller is deteriorated due to mixing two residual signals which are update signals of each echo canceller. To solve this problem, we are to use the blind signal separation(BSS) method separating the mixed signals after the echo cancellers. The blind signal separation method can extracts the source signals by means of the iterative computations with two input signals. We had verified performances of the proposed acoustic echo canceller for stereo through simulations. The results of simulations show that the acoustic echo canceller for stereo using this algorithm operates stably without divergence in the normal state. And, when the speech signals were inputted, this echo canceller achieved about 2dB higher ERLE with the BSS post processing method than without this method. This stereo echo canceller showed the best performance in the case of inputting the real voice signal.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.21-24
• /
• 2002

This paper presents a new method for the motion detection of vehicles using hierarchical motion estimation and parallel processing. It captures the road image by using a CMOS sensor. It divides the captured image into small blocks and detects the motion of each block by using a block-matching method which is based on a hierarchical motion estimation and parallel processing for the real-time processing. The parallelism is achieved by using the pipeline and the data flow technique. The proposed method has been implemented with an embedded system. Experimental results show that the proposed method detects the motion of vehicles in real-time.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.1-5
• /
• 2016

High-speed and high-torque performance is required in the ultra-high speed electric injection molding machine field. To implement this performance, the big-size inverter is needed and the corresponding converter should be used. In this case, the whole cost for configuring the system will be increased. In this paper, we introduce a method which is able to reduce the energy and the cost for configuring the system using the energy regeneration. The energy regeneration method is based on reusing the regeneration power generated at the electric motor during decelerating the injection motion. In this paper, we demonstrate the effectiveness of the method by using the ultra-high speed injection motion.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.146-154
• /
• 2019

An improved principal component analysis (PCA) method is applied for sensor fault detection and isolation (FDI) in a nuclear power plant (NPP) in this paper. Data pre-processing and false alarm reducing methods are combined with general PCA method to improve the model performance in practice. In data pre-processing, singular points and random fluctuations in the original data are eliminated with various techniques respectively. In fault detecting, a statistics-based method is proposed to reduce the false alarms of $T^2$ and Q statistics. Finally, the effects of the proposed data pre-processing and false alarm reducing techniques are evaluated with sensor measurements from a real NPP. They are proved to be greatly beneficial to the improvement on the reliability and stability of PCA model. Meanwhile various sensor faults are imposed to normal measurements to test the FDI ability of the PCA model. Simulation results show that the proposed PCA model presents favorable performance on the FDI of sensors no matter with major or small failures.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1098-1104
• /
• 2015

With the widespread use of smartphones and IoT (Internet of Things), data are being generated on a large scale, and there is increased for the analysis of such data. Hence, distributed processing systems have gained much attention. Hadoop, which is a distributed processing system, saves the metadata of stored files in name nodes; in this case, the main problems are as follows: the memory becomes insufficient; load occurs because of massive small files; scheduling and file processing time increases because of the increased number of small files. In this paper, we propose a solution to address the increase in processing time because of massive small files, and thus improve the processing performance, using the Reuse JVM method provided by Hadoop. Through environment setting, the Reuse JVM method modifies the JVM produced conventionally for every task, so that multiple tasks are reused sequentially in one JVM. As a final outcome, the Reuse JVM method showed the best processing performance when used together with CombineFileInputFormat.

• 한국한의학연구원논문집
• /
• 제9권1호
• /
• pp.91-102
• /
• 2003

The Effects and processing methods of Rhei Rhizoma from Donguibogam and Chejungsinpyeon were studied, Through the study, we found 21 kinds of processing method of Rhei Rhizoma in Donguibogam and Chejungsinpyeon, Processing methods used in Donguibogam and Chejungsinpyeon were effective from reducing side effects of Rhei Rhizoma, and were safe in clinical application, the aims of processing methods of Rhie Rhizoma were safer application by reducing poisonous character, and increase the range of clinical application by useing 21 kinds of processing methods.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.967-985
• /
• 2019

Bug report processing is a key element of bug fixing in modern software maintenance. Bug reports are not processed immediately after submission and involve several processes such as bug report deduplication and bug report triage before bug fixing is initiated; however, this method of bug fixing is very inefficient because all these processes are performed manually. Software engineers have persistently highlighted the need to automate these processes, and as a result, many automation techniques have been proposed for bug report processing; however, the accuracy of the existing methods is not satisfactory. Therefore, this study focuses on surveying to improve the accuracy of existing techniques for bug report processing. Reviews of each method proposed in this study consist of a description, used techniques, experiments, and comparison results. The results of this study indicate that research in the field of bug deduplication still lacks and therefore requires numerous studies that integrate clustering and natural language processing. This study further indicates that although all studies in the field of triage are based on machine learning, results of studies on deep learning are still insufficient.

• 정보학연구
• /
• 제7권2호
• /
• pp.43-54
• /
• 2004

홉필드 네트웍(Hopfield Network)은 존 홉필드(John J. Hopfield) 박사에 의해 제안된 이래 패턴인식과 최적화 문제에 활용되어 왔다. 특히 리(Jian-Hua Li)에 의해 제안된 방식은 SVD(singular value decomposition) 기법을 사용하여 입력패턴을 재구성함으로써 효율향상에 기여하였다. 본 논문은 리(Li)가 제안한 홉필드 네트웍에 사용할 패턴 집합의 선형 선처리 방식에 따른 성능 향상을 실험하였다. 선형 선처리 방식에 하다마드 방식과 랜덤 방식이 최대 30%, 하다마드 방식이 최대 15%의 성능이 향상되었다. 수렴시간 측면에서 보면 랜덤 방식이 최대 5 이터레이션, 하다마드 방식이 최대 2.5 이터레이션의 성능 향상을 확인하였다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.