• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.492-499
• /
• 2000

In this paper, realization techniques of the parallel processing and the parallel network system for image processing are described. The parallel image processing system is constructed by the characterization of image processing and processor. Several problems are solved to achieve effective parallel processing and processor networking with the particular properties of image processing, which are reduction of communication quantity, equalization of load and delay depreciation on communication. A parallel image input device is developed for the flexible networking of parallel image processing. An abnormal region detection algorithm which is the basic function in machine vision is applied to evaluate the constructed parallel image processing system. The performance and effectiveness of the system are confirmed by experiments.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.544-547
• /
• 2007

Because data processing systems in recent years are more complicated, main function of the data processing is divided as several sub-functions which are implemented and verified in each subsystem of the data processing system. For the verification of data processing system, many interface tests among subsystems are required and also a lot of simulation systems are demanded. This paper proposes CTHS (Common Test Harness System) for satellite ground segment development which has all of functions for interface test of the data processing system in one PC. Main functions of the CTHS software are data interface, system log generation, and system information display. For the interface test of the data processing system, all of actions of the CTHS are executed by a pre-defined operation scenario which is written by purpose of the data processing system test.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.212-224
• /
• 2000

In this paper, a parallel processing system is proposed for improving the processing speed of image related applications. The proposed parallel processing system is fully synchronous SIMD computer with pipelined architecture and consists of processing elements and a multi-access memory system. The multi-access memory system is made up of memory modules and a memory controller, which consists of memory module selection module, data routing module, and address calculating and routing module, to perform parallel memory accesses with the variety of types: block, horizontal, and vertical access way. Morphological filter had been applied to verify the parallel processing system and resulted in faithful processing speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.992-995
• /
• 1996

The major roles of Power SCADA System are continuous monitoring of electrical equipments state, real-time data processing and dispatching. Especially, SCADA system demands fast response time in heavy load condition, high reliability, fault tolerance, expansion capacity for the future. According to developing computer system technology, SCADA system is changing system configuration from centralized processing system to distributed processing system. This paper describes operational benefits, problems and improvement (which is studying in theory) in the application of Open System Architecture SCADA which has been installed since 1994, Seoul regional control center in KEPCO.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.585-592
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for subsurface structure imaging and this system is developed in PC based on Linux for lower-cost computer. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing. The system which is constructed by using these data processing modules is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.149-151
• /
• 2002

We had been developing the variety of parallel processing systems in order to improve the processing speed of visual media applications. These systems were using multi-access memory system(MAMS) as a parallel memory system, which provides the capability of the simultaneous accesses of image points in a line-segment with an arbitrary degree, which is required in many low-level image processing operations such as edge or line detection in a particular direction, and so on. But, the performance of these systems did not give a faithful speed because of asynchronous feature between MAMS and processing elements. To improve the processing speed of these systems, we have been investigated a pipelined parallel processing system using MAMS. Although the system is considered as being the single instruction multiple data(SIMD) type like the early developed systems, the performance of the system yielded about 2.5 times faster speed.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.225-228
• /
• 2003

The purpose of this paper is to develop a semi -automated system for medical image processing with which tissues or organs from medical images can be segmented and classified by people who have basic knowledge of image processing. In addition, the proposed medical image processing system is independent on types of human tissues or images. In this paper, a new semi-automated image processing system with essential image processing functions for medical images is introduced

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.11-15
• /
• 2015

In this study, we present the architecture design of data control system in water hazard information platform with analyzing the complexity of the data processing. Generally, data control systems in data collection and analysis platforms base on the constant data-algorithm data processing meaning that data processing between data and algorithm is fixed. But the number of data processing in data control system is rapidly increasing because of increasing of complexity of system. To hold down the number of data processing, dynamic data-algorithm data processing is able to be applied to data control system. After comparison each data-algorithm data processing method, we suggest design method of the data control system optimizing water hazard information platform.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1259-1276
• /
• 2017

As technologies related to sensor network are currently emerging and the use of GeoSensor is increasing along with the development of Internet of Things (IoT) technology, spatial query processing systems to efficiently process spatial sensor data are being actively studied. However, existing spatial query processing systems do not support a spatial-temporal data type and a spatial-temporal operator for processing spatialtemporal sensor data. Therefore, they are inadequate for processing spatial-temporal sensor data like GeoSensor. Accordingly, this paper developed a spatial-temporal query processing system, for efficient spatial-temporal query processing of spatial-temporal sensor data in a sensor network. Lastly, this paper verified the utility of System through a scenario, and proved that this system's performance is better than existing systems through performance assessment of performance time and memory usage.