• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.337-348
• /
• 2016

An experimental approach is presented for the measurement of wear that is common in the threading of cold-forged steel. In this work, the first objective is to measure wear on various types of roll taps manufactured to tapping holes in microalloyed HR45 steel. Different geometries and levels of wear are tested and measured. Taking their geometry as the critical factor, the types of forming tap with the least wear and the best performance are identified. Abrasive wear was observed on the forming lobes. A higher number of lobes in the chamber zone and around the nominal diameter meant a more uniform load distribution and a more gradual forming process. A second objective is to identify the most accurate data-mining technique for the prediction of form-tap wear. Different data-mining techniques are tested to select the most accurate one: from standard versions such as Multilayer Perceptrons, Support Vector Machines and Regression Trees to the most recent ones such as Rotation Forest ensembles and Iterated Bagging ensembles. The best results were obtained with ensembles of Rotation Forest with unpruned Regression Trees as base regressors that reduced the RMS error of the best-tested baseline technique for the lower length output by 33%, and Additive Regression with unpruned M5P as base regressors that reduced the RMS errors of the linear fit for the upper and total lengths by 25% and 39%, respectively. However, the lower length was statistically more difficult to model in Additive Regression than in Rotation Forest. Rotation Forest with unpruned Regression Trees as base regressors therefore appeared to be the most suitable regressor for the modeling of this industrial problem.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.77-85
• /
• 2009

As the multimedia technology has become in popular, many software packages that are for using those multimedia contents have also been developed. Directshow is a media framework which makes the development of such multimedia software simple, quick and regular process. In the Directshow, data are processed through the connections between filters. In general, Filtergraph is utilized to be set as 'Intelligent Connection' for filter connection. However, when we use this 'Intelligent Connection' option, they can show non-expected results or fail to connect with filter's pins together. So in this paper, we propose non-necessary filter cut-off method for connecting only just wanted filters. There are two methods such as inner filter cut-off method and outer filter one. The inner filter cut-off method is good at connection's compatibility and able to quickly connect with each other filter. But in the outer filter cut-off method, filter source is not necessary and connection is exactly done with other filter. In the end, we propose Directshow based filter cut-off model which compose of wanted filter connection and minimize error probability, through mixing up the advantages of two filter cut-off methods.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.674-677
• /
• 2008

The Architecture, engineering, & construction (AEC) industry domains have grown more complex and larger, BIM is a digital representation of a building to facilitate the exchange and development of construction information integration and interoperability. Industry Foundation Classes (IFCs), under development by International Alliance for Interoperability (IAI), represent the part of buildings or elements of a process. IFC has been adopted as a central information repository in order to deliver integrated building information. Other BIM software could open the IFC file, recognize standard objects such as walls, window, and doors as building components. The IFC standard is generally agreed to be of high quality and is widely implemented in software. However, sometimes, information distortion or information toss occurrs during information exchang. The IAI Model Support Group (IAI-MSG) offers the opportunity to certify IFC-compliant applications based on a structuralized approach. However, IFC interoperability error also have occurred by using certificated tools. As project participants exchange BIM information by using BIM software they will need a reliable and efficient exchange of information. In this paper, previous interoperability tests were analyzed, and we propose a new concept in interoperability test.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.111-116
• /
• 2008

The study installed non metric camera which was a 10 Mega Pixel camera in RC Helicopter. And the study controlled images hotographed in air on land, considering their overlap. The study could express DEM by abstracting TIN from the acquired images through image registration. Also, the study compared and examined accuracy between reference point and check point observed by Total Station which was a conventional type of survey. As the results, the study could get errors of $-0.194{\sim}0.224\;m$ on X axis, $-0.088{\sim}0.180\;m$ on Y axis and $-0.286{\sim}0.285\;m$ on Z axis. Expressing an error's RMSE in the checkpoint, the study could get of 0.021388 m on X axis, 0.015285 m on Y axis and 0.041872 m on Z axis. It is judged that the above photographing and analyzing technique are better than the existing Total Station to acquire more terrain elevation data.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.136-147
• /
• 2003

To achieve an optimal performance for a given problem, we need an integrative process of the parameter optimization via learning and the structure optimization via model selection. In this paper, we propose an efficient optimization method for improving generalization performance by considering the property of each sub-method and by combining them with common theoretical properties. First, weight parameters are optimized by natural gradient teaming with adaptive regularization, which uses a diverse error function. Second, the network structure is optimized by eliminating unnecessary parameters with natural pruning. Through iterating these processes, candidate models are constructed and evaluated based on the Bayesian Information Criterion so that an optimal one is finally selected. Through computational experiments on benchmark problems, we confirm the weight parameter and structure optimization performance of the proposed method.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.191-199
• /
• 2006

This paper presents an efficient pre echo control scheme for MPEG Audio coders based on the psychoacoustic model II (PAM-II). Pre echo control is the final step for the calculation of masking threshold in the PAM II. It is to minimize the spread of quantization error over the processing frame. In the conventional encoders, pre echo is reduced by restricting the estimated masking threshold not to exceed the one obtained in the previous frame. The conventional method performs pre echo control not only for short blocks but also for long blocks, which lowers the masking threshold in long blocks and, in turn, increases the quantization noise level of corresponding blocks. This paper proposes an efficient pre echo control process. The test result shows a mean enhancement of more than 0.4 especially for complex signals on the ITU R 5 point audio impairment scale.

• Geomechanics and Engineering
• /
• v.7 no.3
• /
• pp.233-246
• /
• 2014

Estimation of fracture initiation pressure is one of the most difficult technical challenges in hydraulic fracturing treatment of vertical or horizontal oil wells. In this study, the influence of in-situ stresses and pore pressure values on fracture initiation pressure and its profile in vertical and horizontal oil wells in a normal stress regime have been investigated. Cohesive elements with traction-separation law (XFEM-based cohesive law) are used for simulating the fracturing process in a fluid-solid coupling finite element model. The maximum nominal stress criterion is selected for initiation of damage in the cohesive elements. The stress intensity factors are verified for both XFEM-based cohesive law and analytical solution to show the validation of the cohesive law in fracture modeling where the compared results are in a very good agreement with less than 1% error. The results showed that, generally by increasing the difference between the maximum and minimum horizontal stress, the fracture pressure and its profile has been strongly changed in the vertical wells. Also, it's been clearly observed that in a horizontal well drilled in the direction of minimum horizontal stress, the values of fracture pressure have been significantly affected by the difference between overburden pressure and maximum horizontal stress. Additionally, increasing pore pressure from under-pressure regime to over-pressure state has made a considerable fall on fracture pressure in both vertical and horizontal oil wells.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.793-799
• /
• 2009

Esterel is an imperative synchronous language that is well-adopted to specify reactive systems. Programmers sometimes want simple validations that can be applied while the system is under development. Since a reactive system reacts to environment changes, a test data is a sequence of input events. Generating proper test data by hand is complex and error-prone. Although several test data generators exist, they are hard to learn and use. Mostly, system designers need test data to reach a specific status of a target program. In this paper, we develop a test data generator to generate test input sequences for debugging Esterel programs. Our tool is focused on easy usage; users can describe test data properties with simple specifications. We show a case study in which the test data generator is used for a practical development process.

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.115-122
• /
• 2012

As the most common application development of software development time, error-free quality, adaptability to frequent maintenance, such as the need for large and complex software challenges have been raised. When developing web applications to respond to software reusability, reliability, scalability, simplicity, these quality issues do not take into account such aspects traditionally. In this situation, the traditional development methodology to solve the same quality because it has limited development of new methodologies is needed. Quality of applications the application logic, data, and architecture in the entire area as a separate methodology can achieve your goals if you do not respond. In this study secure coding, the big issue, web application factors to deal with security vulnerabilities, web application architecture, design procedure is proposed. This proposal is based on a series of ISO/IEC9000, a web application architecture design process.