• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.80-85
• /
• 2018

Usable capacity is one of the most important parameters for evaluating the performance of an adsorbent for $CO_2$ capture from flue gas streams. In the pressure swing adsorption (PSA) process, the usable capacity is calculated as the difference between the quantity adsorbed in flue gas at high pressure (ca. 20 bar) and the quantity adsorbed at lower purge pressure (ca. 2 bar). In this paper, two stereo-types of metal-organic framework (MOF) were evaluated as an promising adsorbent for $CO_2$ capture: flexible structured MOF (MIL-53) and MOF possessing strong binding sites (MOF-74). The results showed that a total $CO_2$ capture capacity is strongly related to the specific surface area and heat of adsorption, revealing high uptake in MOF-74. However, the usable capacity was more pronounced in MIL-53 due to a structural transition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.133-138
• /
• 2019

This study evaluated the tensile properties of SAPH440, a hot-rolled steel for automotive structural applications, based on GMAW lap welding, the welding current, the welding voltage, and the feed rate. Tensile tests were performed according to the joint parameters of the GMAW process, for which specimens were fabricated according to KS B ISO 9018 by lap welding. The bead appearance was observed in each condition, and the weldability was evaluated by the tensile test. Higher the welding current resulted in a deeper weld, but the tensile strength was not significantly different from when the parameter was fixed due to the fracture of the base material. When the current was higher than the voltage, as in the case of a welding current of 200 A and welding voltage of 17 V, a large amount of spatter is generated, the welding is unstable, and the welded part breaks. Higher the voltage resulted in the bead not causing defects in general, and it also affected the weldability. If the current and voltage were too low, the welding was not performed normally, and the tensile strength could not be measured. However, as the current increased, the increase of the voltage and the feed rate did not affect the tensile strength.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.197-213
• /
• 2019

We simulated the fault reactivation experiment conducted at 'Main Fault' intersecting the low permeability clay formations of Mont Terri Underground Research Laboratory in Switzerland using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. We formulate the hydro-mechanical coupling relation of hydraulic aperture to consider the elastic fracture opening and failure-induced dilation for reproducing the abrupt changes in injection flow rate and monitoring pressure at fracture opening pressure. A parametric study was conducted to examine the effects of in-situ stress condition and fault deformation and strength parameters and to find the optimal parameter set to reproduce the field observations. In the best matching simulation, the fracture opening pressure and variations of injection flow rate and monitoring pressure showed good agreement with field experiment results, which suggests the capability of the numerical model to reasonably capture the fracture opening and propagation process. The model overestimated the fault displacement in shear direction and the range of reactivated zone, which was attributed to the progressive shear failures along the fault at high injection pressure. In the field experiment results, however, fracture tensile opening seems the dominant mechanism affecting the hydraulic aperture increase.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.17-29
• /
• 2019

This study developed prediction models of chlorine bulk decay coefficient by each condition of water quality, measuring chlorine bulk decay coefficients of the water and water quality by water purification processes. The second-reaction order of chlorine were selected as the optimal reaction order of research area because the decay of chlorine was best represented. Chlorine bulk decay coefficients of the water in conventional processes, advanced processes before rechlorination was respectively $5.9072(mg/L)^{-1}d^{-1}$ and $3.3974(mg/L)^{-1}d^{-1}$, and $1.2522(mg/L)^{-1}d^{-1}$ and $1.1998(mg/L)^{-1}d^{-1}$ after rechlorination. As a result, the reduction of organic material concentration during the retention time has greatly changed the chlorine bulk decay coefficient. All the coefficients of determination were higher than 0.8 in the developed models of the chlorine bulk decay coefficient, considering the drawn chlorine bulk decay coefficient and several parameters of water quality and statistically significant. Thus, it was judged that models that could express the actual values, properly were developed. In the meantime, the chlorine bulk decay coefficient was in proportion to the initial residual chlorine concentration and the concentration of rechlorination; however, it may greatly vary depending on rechlorination. Thus, it is judged that it is necessary to set a plan for the management of residual chlorine concentration after experimentally assessing this change, utilizing the methodology proposed in this study in the actual fields. The prediction models in this study would simulate the reduction of residual chlorine concentration according to the conditions of the operation of water purification plants and the introduction of rechlorination facilities, more reasonably considering water purification process and the time of chlorination. In addition, utilizing the prediction models, the reduction of residual chlorine concentration in the supply areas can be predicted, and it is judged that this can be utilized in setting plans for the management of residual chlorine concentration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.271-274
• /
• 2014

This paper proposes high-performance SAO(Sample Adaptive Offset) in HEVC(High Efficiency Video Coding) encoder for Ultra HD video processing in real time. SAO is a newly adopted technique belonging to the in-loop filter in HEVC. The proposed SAO encoder hardware architecture uses three-layered buffers to minimize memory access time and to simplify pixel processing and also uses only adder, subtractor, shift register and feed-back comparator to reduce area. Furthermore, the proposed architecture consists of pipelined pixel classification and applying SAO parameters, and also classifies four consecutive pixels into EO and BO concurrently. These result in the reduction of processing time and computation. The proposed SAO encoder architecture is designed by Verilog HDL, and implemented by 180k logic gates in TSMC $0.18{\mu}m$ process. At 110MHz, the proposed SAO encoder can support 4K Ultra HD video encoding at 30fps in real time.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.846-853
• /
• 2019

Phytochemical compounds of Ligusticum striatum Makino are used as traditional medicinal herbs in Asia. These compounds are reported to have pain relief and antioxidant activities in gynecological and brain diseases. In this study, we investigated the antioxidant effects of Ligusticum fermented ethanol extract from Lactobacillus plantarum BHN-LAB 129 isolated from Kimchi, a Korean traditional food. The total polyphenol and total flavonoid contents increased by about 116.2% and 281.0% respectively, in the fermented Ligusticum extract as compared with those in the nonfermented Ligusticum ethanol extract. Superoxide dismutase-like (SOD), DPPH radical scavenging, ABTS radical scavenging, and reducing power activities increased by around 139.9%, 199.6%, 301.0%, and 137.1%, respectively, in the fermented Ligusticum ethanol extract as compared with these parameters in the nonfermented Ligusticum ethanol extract, respectively. In conclusion, the fermented Ligusticum ethanol extract with L. plantarum BHN-LAB 129 was effective in increasing the antioxidant effects. The bioconversion process in this study points to the potential of using Ligusticum to produce phytochemical-enriched natural antioxidant agents with high added value. The findings may prove useful in the development of improved foods and cosmetic materials.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.4
• /
• pp.73-89
• /
• 2021

Establishing career goals and making a career choice is the most crucial task for college students. This study aims to identify the motive of college students' career choices and analyze the relationship between career capabilities and career decision-making in order to provide basic materials that can assist college students in the career decision-making process. To do this, a survey was conducted among college students attending a D university in Busan. A total of 326 survey responses were selected for analysis, and path analysis was conducted using SPSS 25 and AMOS 25. The results of the study are as follows. First, intrinsic motivation for career choice and extrinsic motivation for career choice were found to affect career consideration and career management capabilities, respectively, with statistical significance. Second, career consideration and career path management capabilities influenced both concreteness and confidence, which are elements of career decision-making with statistical significance. Intrinsic motivation for career choice and extrinsic motivation for career choice affected concreteness and confidence in career decision-making with career consideration and career management capabilities as parameters. These findings imply that in order to increase the concreteness and confidence in the career decision-making of undergraduate students, it is necessary to strengthen their career consideration and career management capabilities. As the unemployment rate of youths rises and the types and specialization of jobs increase amid uncertainty in the future employment conditions, undergraduate students face increasing difficulties in career decision-making. The results of this research are expected to be used as basic materials for the career decision-making of undergraduate students, which will assists in career path consultation and guidance in universities.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.356-367
• /
• 2021

This study is a study on how much organizational leadership influences customer orientation so that it can secure and maintain a continuous competitive advantage in the rapidly changing environment of corporate management and public organizations. it was approached through theoretical consideration of pygmalion leadership. The purpose of this study is as follows. First, a conceptual definition of the three research variables of pygmalion leadership and its constituent atmosphere, feedback, and output is given. Second, the casual relationship between the conceptually defined three research variables of pygmalion leadership and self-efficacy and organizational commitment was verified. Third, the casual relationship was verified on the extent to which pygmalion leadership influences customer orientation through self-efficacy and organizational commitment, which are parameters. Fourth, through the verification result of the casual relationship between the research variables constituting the research model of this study. It was intended to present an implication. In addition, the significance of direct causal relationships between the research variables of pygmalion leadership, mediating variables, and dependent variables, which constitute the verified research models was verified, and the results of hypothesis testing were presented, and the academic and practical implications of the results of this study were presented.

• Composites Research
• /
• v.33 no.6
• /
• pp.371-376
• /
• 2020

The adhesive strength can be improved through surface treatment. The most common method is to improve physical bonding by varying the surface conditions. This study presents the effect of laser surface treatment on the adhesive strength of CFRP. The surface roughness was patterned using a 1064 nm laser. The effects of the number of laser shots and the direction and length of the pattern on the adhesion of the CFRP/CFRP single joint were investigated through tensile tests. Tests according to ASTM D5868 were performed, and the bonding mechanism was determined by analyzing the damaged surface after a fracture. The optimized number of the laser shots and the optimized depth of the roughness should be required to increase the bonding strength on the CFRP surface. When considering the shear stress in the tensile direction, the roughness pattern in the direction of 45° that increases the length of the fracture path in the adhesive layer resulted in an increase of the adhesive strength. The surface treatment of the bonding surface using a laser is a suitable method to acquire a mechanical bonding mechanism and improve the bonding strength of the CFRP bonding joint. The study on the optimized laser process parameters is required for utilizing the benefits of laser surface processing.

• Food Engineering Progress
• /
• v.22 no.4
• /
• pp.386-391
• /
• 2018

Effects of a commercial scale intervention system combining ultraviolet (UV)-C and plasma treatments on the microbial decontamination of black pepper powder were investigated. The process parameters include treatment time, time for plasma accumulation before treatment, and water activity of black pepper powder. A significant reduction in the number of indigenous aerobic mesophilic bacteria in black pepper powder was observed after treatments lasted for ${\geq}20min$ (p<0.05) and the reduction was differed by powder manufacturer. The microbial reduction rates obtained by individual UV-C treatment, individual plasma treatment, and UV-C/plasma-combined treatment were 0.2, 0.5, and 1.0 log CFU/g, respectively, suggesting that the efficacy of the microbial inactivation was enhanced by treatment combination. Nonetheless, neither plasma accumulation time nor powder water activity affected the microbial inactivation efficacy of the combined treatment. The UV-C/plasma-combined treatment, however, decreased lightness of black pepper powder, and the decrease generally increased as operation time increased. The plasma accumulation time of 20 min resulted in significant reduction in both lightness and brown color. The results indicate that the commercial-scale intervention system combining treatments of UV-C and plasma has the potential to be applied in the food industry for decontaminating black pepper powder.