• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.31-38
• /
• 2019

The systems engineering standard process is intended to be customized for a given project environment and system characteristics. This study describes the experience gained by applying systems engineering to government-funded projects. The characteristics of government funded project are lack of common development process among the participating organizations and mechanism to determine system requirements. This study describes the contents of the systems engineering activities, including development of operational concept, system requirements, verification requirements (test cases), test verification plan, and implementation of system test and lessons learned from these activities.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.72-82
• /
• 2018

Generally speaking, because of complexity of engineering process, the systems engineering may be not easy to understand clearly and not easy to perform also. The status of systems engineering infrastructure of the some Korean industry is not matured yet, i.e., the systems engineering process, method, tool and environment is not implemented consistently within the steel making industry. These difficulties are more severe at the concept and basic design phase than the detail design phase relatively. Korean industry has lots of development project for the precedented systems and usually has matured domain knowledge for the precedented systems. Even though there is a mature domain knowledge of the precedented systems, the development project will lead to failure under the condition of engineering system is not well equipped. For the project success, it is very important to have a proper engineering execution system especially for the concept design and basic phase, which has a high abstraction and a large influence on the whole project. This paper proposes a minimized design process that can be easily applied to the concept and basic design phase of the precedented systems, instead of complex system engineering processes. This paper also proposes the application case of the minimized design process and methods for a Blast Furnace System.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.123-123
• /
• 2003

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.51-60
• /
• 2013

With the recent changes in the environment of weapon systems acquisition, the systems development is becoming more susceptible to a variety of risks. To cope with this situation, US DoD has been emphasizing the importance of constantly applying the test and evaluation (T&E) process throughout the whole life cycle of the weapon systems. In particular, the safety requirements are called for attention while dealing with system risks. To this end, the present paper is aimed at studying the T&E process which incorporates the systems safety in weapon systems development. Analyzing and modeling the relevant processes has made it possible to achieve the objective. As a case study, the model results were applied to the development of unmanned aerial vehicles.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.29-38
• /
• 2016

The threats around Korea Peninsula have been dramatically increased because North Korea is developing the Nuclear ballistic missile, Submarine launched ballistic missile(SLBM), and many kinds of weapons for sudden provocations. Therefore, ROK navy needs the cutting-edge warship combat systems in order to defeat the enemy threats effectively in the sea. The paper analyzes current warship combat system acquisition process and studies US navy and other advanced countries acquisition process and their contraction trends. After that, the paper proposes the optimal acquisition process of warship combat system for the ROK navy based on our current situation and other advanced countries acquisition trends. The paper will dedicate the next generation warship combat system acquisition process.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.2
• /
• pp.21-31
• /
• 2014

Recently, global market competition of iron and steel products is ever increasing due to over-supply from increased number of industries in rapidly growing countries, such as China, Brazil, and Indonesia. To occupy the big market, major industries are trying to develop high quality, high performance steel products via developing a new iron and steel making process. In other words, development of a new and innovative steel plant is a key to cope with the tough situation. Design and development for the life cycle of iron and steel making plant is very much complex and multi-disciplinary. In this paper, Plant Systems Engineering (PSE), a tailored SE process for industrial plant based on ISO/IEC 15288 is used for the design of Continuous Casting Process (CCP) Plant system. The CCP is a crucial process in steel making plant, whose design technology is occupied by the advanced foreign companies. For the sake of increasing engineering capability for the design of CCP, we applied PSE Process for the renovation of the existing CCP Process. Through the study, we were convinced that the applied method can be used for other plant systems, and SE is really the way of thinking, design, and development of modern complex and multi-disciplinary systems where high risk factors are present throughout the whole life cycle.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.69-75
• /
• 2001

Systems engineering has been utilized in system development primarily for large-scale projects or commercial large-scale systems during the last several decades. We can understand why it would be useful to apply systems engineering to the development of a relatively small system. However, it is difficult to effectively carry out a project due to the complexity in applying the methods of systems engineering. To apply systems engineering to the development of a small system, the system engineering processes should be tailored. We established a requirements driven system design process(RDSDP) that can effectively carry out the system design far a small system. RDSDP is a system design process that treats all the requirements thoroughly and effectively. This is applied by the designer according to a standardized and systematized process during the first phase in design, in which system specifications are made. By using RDSDP, we can affect a reduction of the number of redesign phases in the process of the system design, shorten the period for to make specification, which will then cause the system to succeed in the actual application.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.27-32
• /
• 2006

The emerging standards since 1990's can be classified as 'system standards' (process-oriented standards) and they specify the process of an enterprise and also apply to almost all industries regardless of size, type and products. Notice that the conventional specification-oriented standards present relatively clear criteria even though the structure, performance, and terminology are defined in text-based form. However, the system standards dealing with the processes do not present a coherent guide. Therefore, it is difficult to analyze them with the same viewpoint, thereby resulting in differences in the level of understanding. This study is aimed at graphically modeling the system standards originally described in text-based form. The study has been carried out in the framework of the PMTE (Process, Methods, Tools, and Environment) paradigm. The system standard targeted here is ISO/IEC 15288. Firstly, review of the literature on the systems engineering (SE) standard/process and on the graphic model IDEF0 was done, respectively, for the parts of 'E' and 'M'. Then the SE process of the MIL-STD 499B was applied to ISO/IEC 15288 as 'P'. Finally, the graphical model was generated by AI0Wins as 'T'. As a result, the graphical model-based approach can complement the drawbacks of the text-based form.

• Journal of the Korean Society of Systems Engineering
• /
• v.20 no.spc1
• /
• pp.1-11
• /
• 2024

Today, the importance of test and evaluation of defense systems is increasing day by day. In performing efficient defense systems test works, process improvement based on quantitative management is essential. The purpose of this paper is to present the results of process improvement for the defense systems test works of the test organization based on quantitative management activities. As a methodology to confirm process improvement performance, the 'MPM(Managing Performance and Measurement)' practice area of the CMMI model was applied. The quantitative management model for defense systems test works was developed so that it could be practically applied not only to the entire test organization but also to the organization at the department level that actually performs the test work. Finally, the application cases of the quantitative management model for defense system test works and the results of process improvement were described.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.53-56
• /
• 2011

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design, development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management process, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of Technical Management process.