• Transactions of Materials Processing
• /
• v.5 no.1
• /
• pp.27-36
• /
• 1996

In this paper a computer-aided design system for axisymmetric deep drawing process will be described. An approach to the system is based on the knowledge based system. The system has been written in AutoLISP with personal computer. The system is composed of four main modules such as input geometrical design test & rectification and user modification. the system which aids designer provides powerful capabilities for the design of axisymmetric deep drawing process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

Lower arm for automobile has been made in steel traditionally. Nowadays steel is being substituted fur aluminum to reduce weight of automobile. Widely applied production method of aluminum component has been casting processes or cast/forging processes. But casting or cast/forging processes have limits of application to parts which is required high strength durability like automotive component. In this research, hot forging process has been adopted to produce aluminum lower arm to ensure required mechanical properties. To reduce production cost, 2 pieces with 1 blow process was developed. Optimization and verification of hot forging process for aluminum lower arm was performed by computer aided engineering using finite volume methods.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.59-67
• /
• 2006

If apply BPM that is a business process management tool to SCM sector, efficient process management and control are available. Also, BPM can execute integrating process that compose SCM effectively. These access method does to manage progress process of SCM process more efficiently and do monitoring. Also, It is can be establish plan about improvement of process analyzing process achievement result. Thus, in this paper, introduce this BPM into SCM environment. Also, SCM process presents plan that executes integration and improves business process effectively applying data mining technique.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.516-520
• /
• 2009

In garment manufacturing process, making a prototype of a product is a preceding part ahead of mass production. However, it takes up a lot of trial and error, let alone the expense in the past manufacturing system. In this paper we introduce the process which can replace the past one with using recently developed computer graphics technique. We also demonstrate this method is valid on a variety of clothes compared to the real experiments. In this process, a designer can make a garment, simulate it in 3D computer system, and easily fix the problems before finalizing a prototype.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.148-154
• /
• 2015

Computer aided process planning (CAPP) keeps an important role between the design and manufacturing engineering processes. A CAPP system is a digital link between a computer aided design (CAD) model and manufacturing instructions. CAPP have been researched and applied in manufacturing filed, however, one manufacturing area where CAPP has not been extensively researched is rapid prototyping (RP). RP is a technique for creating directly a three dimensional CAD data into a physical prototype. RP enables to build physical models automatically and to use to reduce the time for the product development cycle as well as to improve the final quality of the designed product. Three-dimensional (3D) printing is one kind of RP that creates three-dimensional objects from CAD models. The paper presents a computer aided process planning system for printing medical products. 3D printing has been used to solve complex medical problems such as surgical instruments, bioengineered products, medical implants, and surgical guides.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.2
• /
• pp.41-49
• /
• 2004

Layer transfer process has emerged as a promising tool in the field of thin silicon solar cell technology. This process can use mono-crystalline silicon as a surface for the epitaxial growth of a thin layer of silicon. It requires some sort of surface conditioning of the substrate due to which the surface become suitable for homo-epitaxy and lift off after solar cell fabrication. The successful reuse of substrate has been reported. The use of the conditioned surface without any kind of epitaxial layer growth is also the issue to be addressed. This review paper basically describes the five most cost effective methods on which works are in progress. Several types of possible problems envisaged by different research groups are also incorporated here with necessary discussion. Work in Korea has already started in this area in collaboration IC Design and Fabrication Centre, Jadavpur University, India and that also has been mentioned.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1140-1145
• /
• 2008

In conventional cutting system of Heat-Shrink-Tube, workers operate cutting system after considering about length and quantity of heat-shrink-tube. So, not only work time and production cost is increased but also material is wasted because the data that workers have to consider is so much. In this paper, an effective cutting system of heat-shrink-tube was developed to reduce production cost, work time and waste of material. The cutting system consists of a supervisory computer installed inside a control room, a on-site computer installed on the work area, and a PLC system. In the developed system, a supervisory computer send work order to the on-site computer using LAN and the on-site computer operates the cutting system of the heatshrink-tube after it makes an array production order. Also, the on-site computer reports information to the supervisory computer when an accident happened.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.3
• /
• pp.47-65
• /
• 2006

For the purpose of analysis, the supporting methods for inquiry process is divided into 3 types; when CSILE supports low-level of basic inquiry process, when CSILE supports high-level of integrated inquiry process and when CSILE supports both low-level and high-level of inquiry process. Strauss and Corbin's(1998) grounded theory was used to analyze inquiry process of learning groups. 48 elementary school students in 6th grade participated in this study. Those participants were assigned into 3 groups and each group consisted of 16 students. Then, participants studied a retarded unit in science subject cooperatively for 4 weeks using CSILE program. Through this extensive experiment, 3 types of inquiry model was revealed.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.27-30
• /
• 2018

The dependency of the electrical characteristics of silicon solar-cells on the depth of damaged layer induced by wire-sawing process was investigated. To compare cell efficiency with residual sawing damage, silicon solar-cells were fabricated by using as-sawn wafers having different depth of saw damage without any damaged etching process. The damaged layer induced by wire-sawing process in silicon bulk intensely influenced the value of fill factor on solar cells, degrading fill factor to 57.20%. In addition, the photovoltaic characteristics of solar cells applying texturing process shows that although the initial depth of saw-damage induced by wire-sawing process was different, the value of short-circuit current, fill-factor, and power-conversion-efficiency have an almost same, showing ~17.4% of cell efficiency. It indicated that the degradation of solar-cell efficiency induced by wire-sawing process could be prevented by eliminating all damaged layer through sufficient pyramid-surface texturing process.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.324-328
• /
• 1998

This paper is aimed to study the computer simulation of sintering process for ceramics by Monte Carlo and molecular dynamics methods. Plural mechanisms of mass transfer were designed in the MC simulation of sintering process for micron size particles; the transfer of pore lattices for shrinkage and the transfer of solid lattices for grain growth ran in the calculation arrays. The MD simulation was performed in the case of nano size particles of ionic ceramics and showed the characteristic features in sintering process at atomic levels. The MC and MD simulations for sintering process are useful for microstructural design for ceramics.