• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1002-1003
• /
• 2006

This research mainly focuses on the development of sinter brazing technology for improving the process related to belt pulley made by sinter hardening. As the machine process of belt pulley takes up more than half of the total manufacturing hours, we propose changing the process to pulley groove brazed and bonded with pulley disc by applying sinter brazing to belt pulley. With the new process, the belt pulley is expected to reduce manufacturing cost to 70% of the original process by applying the sinter brazing technology; and the belt pulley bound by sinter brazing only loses 10% bonding strength compared with the original process.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.60-64
• /
• 2011

Computer-aided engineering (CAE) is the broad usage of computer software to aid in engineering tasks. It includes computer-aided design (CAD), computer-aided analysis (CAA), computer-integrated manufacturing (CIM), computer-aided manufacturing (CAM), material requirements planning (MRP), and computer-aided planning (CAP). In this study, the stress of mold analyzed using CAE technique. Punch loads were same difference between 0.5 % and 1.0 % of clearance, but punch load was decreased according to increasing of clearance. Punch load of pre-piercing process worked a little smaller than piercing process. Therefore, the hole of fine blanking process is also more efficient to manufacture the true size after pre-piercing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2121-2142
• /
• 2011

In this paper, we propose an e-Learning process control model that aims to graphically describe and automatically generate the manifest of sequencing prerequisites in packaging SCORM's content aggregation models. In specifying the e-Learning activity sequencing, SCORM provides the concept of sequencing prerequisites to be manifested on each e-Learning activity of the corresponding tree-structured content organization model. However, the course developer is required to completely understand the SCORM's complicated sequencing prerequisites and other extensions. So, it is necessary to achieve an efficient way of packaging for the e-Learning content organization models. The e-Learning process control model proposed in this paper ought to be an impeccable solution for this problem. Consequently, this paper aims to realize a new concept of process-driven e-Learning content aggregating approach supporting the e-Learning process control model and to implement its e-Learning process modeling system graphically describing and automatically generating the SCORM's sequencing prerequisites. Eventually, the proposed model becomes a theoretical basis for implementing a SCORM-based e-Learning process management system satisfying the SCORM's sequencing prerequisite specifications. We strongly believe that the e-Learning process control model and its modeling system achieve convenient packaging in SCORM's content organization models and in implementing an e-Learning management system as well.

• 인터넷정보학회논문지
• /
• 제20권5호
• /
• pp.49-55
• /
• 2019

Organizations design and operate business process models to achieve their goals efficiently and systematically. With the advancement of IT technology, the number of items that computer systems can participate in and the process becomes huge and complicated. This phenomenon created a more complex and subdivide flow of business process.The process instances that contain workcase and events are larger and have more data. This is an essential resource for process mining and is used directly in model discovery, analysis, and improvement of processes. This event log is getting bigger and broader, which leads to problems such as capacity management and I / O load in management of existing row level program or management through a relational database. In this paper, as the event log becomes big data, we have found the problem of management limit based on the existing original file or relational database. Design and apply schemes to archive and analyze large event logs through Hadoop, an open source distributed file system, and HBase, a NoSQL database system.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.330-334
• /
• 2018

With the development of the Internet of Things, the use of flexible displays has become widespread. In particular, the use of curved, bendable, and rollable displays is increasing. Flexible display production processes include various important components such as lamination material, flexible substrates, and adhesives. Among them, improvement of the lamination process comprises a large proportion of efforts for further development. In this paper, we attempt to improve the transmittance of the display substrate by performing a bubble removal process after adhesion. The transmittance of the glass substrate with the bubble removal process was 5~12% higher than that of the substrate without the bubble removal process. The fill-strength after the bubble removal process was improved by 21.4%, and the shear-strength was improved by 43.9%.

• 환경위생공학
• /
• 제13권2호
• /
• pp.66-75
• /
• 1998

The computer simulation model was used to forecast the concentrations of COD$_{cr}$, NH$_{4}$$^{+}$-N and NO$_{3}$$^{-}$-N in each reactors. In the biological wastewater treatment system, the computer simulation model was used to observe the behavior of pollutants especially. In this research, effect of SRT, feeding pattern and recirculation rate on UCT(University of Cape Town) process was evaluated by computer simulation model. T-N removal was affected to the SRT. SRT for effective T-N removal was 15 days or longer. Feeding pattern in UCT process was affected to the T-N removal. Feeding pattern which 100% loading to the first reactor was most effective for T-N removal. The effect of recirculation rate was clear for T-N removal. The recirculation from anoxic reactor to anaerobic reactor was not need but the recirculation from oxic reactor to anoxic reactor was need. In aspect of nitrogen removal efficiency, A/O process was higher than UCT process.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 춘계학술대회 논문집
• /
• pp.94-99
• /
• 1999

In this Paper, the estimation method of painting process in the automobile plant using computer simulation techniques is studied to improve the bottle neck process, the weak point and the productivity. For model and analysis, Promodel is used which is a manufacturing oriented simulation software developed by Promodel corporation in the U.S.A. Firstly the result of the simulation shows that we can obtain capability improvement in the system performance using computer simulation. Secondly, the optimum system specification is decided by comparing reports generated by scenario in simulation program find out the suitable conditions. Finally, the speed of conveyor and a pitch of painting body as the most critical parameters are chosen on the basis of exhaustive field evaluation to study their effects o the capacity of the process. The best alternative condition for the maximum capacity of the process is selected by computer simulation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
• /
• pp.247-249
• /
• 2003

Currently there are a variety of different tools may be used to analyze, model, describe and document a business process. However, it is difficult to exchange the information of a business process created in different tools because of the distinct information formats used in different tools. The XML Process Definition Language (XPDL) of the Workflow Management Coalition (WfMC) forms a common interchange standard that enables products to continue to support arbitrary internal representations of process definitions with an import/export function to map to/from the standard at the product boundary. Generally a business process model can be represented by the UML activity diagram, but there is a difficult task to directly generate an XPDL document from a business process model represented by the standard activity diagram. In the paper we will propose an approach to generate an XPDL document from a business process model represented by the extended UML activity diagram.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.213-224
• /
• 2010

An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.

• 대한치과의사협회지
• /
• 제52권6호
• /
• pp.332-345
• /
• 2014

In recent years, precision machining of the dental prosthesis by computer assisted system is becoming pervasive in clinical dentistry. Prosthesis fabricating system that is designed by computer software and made by computer devices is called as a CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) system. By the use of dental CAD/CAM system, the improvement of marginal compatibility and mechanical properties in prosthesis can be obtained more effectively, an aesthetic quality by using new materials such as zirconia can be increased. Also, the restoration process can be simple and efficient, the production time can be shortened, the process of manufacture can be standardized, and the mass production is possible. What is clear is that these benefits are theoretically possible, but the dentist or dental technician must understand the CAD/CAM basic principles and limitations for obtaining the maximum advantages of CAD/CAM system. For this reason, this article will be presented about the basic principles of CAD/CAM system and the factors of error that might occur in the CAD/CAM process based on my empirical study.