• ETRI Journal
• /
• 제39권4호
• /
• pp.493-501
• /
• 2017

This paper introduces a new motion-synthesis technique for animating multiple characters. At a high level, we introduce a hub-sub-control-point scheme that automatically generates many different spline curves from a user scribble. Then, each spline curve becomes a trajectory along which a 3D character moves. Based on the given curves, our algorithm synthesizes motions using a cyclic motion. In this process, space-time warp curves, which are time-warp curves, are embedded in the 3D environment to control the speed of the motions. Since the space-time warp curve represents a trajectory over the time domain, it enables us to verify whether the trajectory causes any collisions between characters by simply checking whether two space-time warp curves intersect. In addition, it is possible to edit space-time warp curves at run time to change the speed of the characters. We use several experiments to demonstrate that the proposed algorithm can efficiently synthesize a group of character motions. Our method creates collision-avoiding trajectories ten times faster than those created manually.

• 수면정신생리
• /
• 제16권1호
• /
• pp.16-21
• /
• 2009

In accordance with the development of EEG and polysomnography in the field of sleep research, the sleep onset period (SOP) between wakefulness and sleep has been considered an important part for understanding the physiology of sleep. SOP in the transition from wakefulness to sleep is a gradual process integrating various viewpoints such as behavior, EEG, physiology and subjective report. Particularly, based on understanding of EEG changes during sleep, SOP has been regarded as a pattern of topographical change in specific frequency and specific state in EEG. Studies on quantitative EEG (qEEG) and event-related potential (ERP) have suggested that SOP shows the changes of functional coordination at the specific cortical areas in qEEG and the changes of regular patterns in response to environmental stimulation in ERP. The development of sleep EEG and topographic mapping of EEG is expected to integrate various viewpoints of SOP and clarify the neurophysiologic mechanism of SOP further.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 한국의류학회지
• /
• 제25권3호
• /
• pp.507-515
• /
• 2001

Tencel is a high quality cellulosic fiber, which is controlled and processed by an environmentally sound route. But, the point about tencel and the reason why it achieves its unique touch in its finished state is that it is a fibrillating fiber. That means it can take a great deal of punishment during the finishing process, which raise the fiber to produce the characteristics handle, without destroying the cloth. The aim of cellulase treatment is to improve appearence of tencel, plus the fiber ends protruding from the fabric surface. But enzymatic hydrolysis can weakens the fiber ends and changes the properties of fabrics. This study examined about the changes of properties according to several conditions and effect of cellulase to fibril of tencel. The results are as follows. The weight loss was occurred, tensile strength was decreased, softness was increased. And cellulase treatment reduced amount of fibril.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.660-663
• /
• 2004

Recently in the automotive industries, light and high quality material is strongly required because of emissions regulation issues. In the electromagnetic stirring process, it has many merits that are the exact control ability about material processing and a good point of the protection of environment. In this paper, the morphology of the change of primary Al phase in A356 alloy by electro magnetic stirrer was investigated to obtain the globular structure. The parameters are the current, stirring time, pouring temperature and cooling rate of different wall thickness; 5mm, 15mm, 25mm respectively. By proper selection of the processing parameters, globular primary particles can be obtained by electromagnetic stirrer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.237-244
• /
• 1995

Fracture properties for LEFM, S-FPZ and NS-FPZ models were determined using by finite element method and energy balance from the experimental results of three-point bend tests. For the LEFM model the stress intensity factor needed to increase continuously with crack extension, and for the S-FPZ model the fracture process zone characteristics need to change continuously if the critical stress intensity factor was to remain constant. The LEFM model showed the largest resistance and the slowest crack extension, while the NS-FPZ model showed the smallest resistance and the fastest crack extension. The responses for the S-FPZ model were intermediate between those for the LEFM and NS-FPZ models and the total fracture energy densities for the S-FPZ and NS-FPZ models and the total fracture energy densities for the S-FPZ and NS-FPZ models were equal.

• 한국실내디자인학회논문집
• /
• 제16권1호
• /
• pp.119-125
• /
• 2007

Changing depends on the one and only out of many design elements constituting the outside, and a Lighting design has an easy characteristic among space. Therefore accuse various sensitivity to watch when lighted up the same environment with Lighting of other colors, and it is an interesting point to show a communication tendency of a Lighting design in the present age escape from a general idea transmit a change of sight to a man of experience directly, and to clarify space simply, and to show various power of expression. The study of a book tried to make a searching examination for a generation cause of this tendency by trying to observe the modern Lighting design tendency that various desires were reflected in of the modern society in various general ideas of communication.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.771-774
• /
• 2007

Integrated Gasification Combined Cycle (IGCC) power plant converts coal to syngas, which is mainly composed with hydrogen and carbon monoxide, by the gasification process and produces electric power by the gas and steam turbine combined cycle power plant. The purpose of this study is to investigate the influence of the syngas to the performance of a gas turbine in a combined cycle power plant. For this purpose, a commercial gas turbine is selected and its performance characteristics are analyzed with syngas. It is found that different heating values of those fuels and chemical compositions in their combustion gases are the causes in the different performance characteristics. Also, Changing of turbine inlet Mass flow lead to change the turbine matching point, in the event the pressure ratio is changed.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.437-450
• /
• 1994

The problem of testing for a change in the parameter of a stochastic process is particularly important in simulation studies. In studies of the steady state characteristics of a simulation model, it is important to identify initialization bias and to evaluate efforts to control this problem. A simulation output have the characteristics of chaotic behavior because of sensitive dependence on initial conditions. For that reason, we will apply Lyapunov exponent for diagnosis of chaotic motion to simulation output analysis. This paper proposes two methods for diagnosis of steady state in simulation output. In order to evaluate the performance and effectiveness of these methods using chaos theory, M/M/I(.inf.) queueing model is used for testing point estimator, average bias.

• 한국주조공학회지
• /
• 제11권1호
• /
• pp.79-84
• /
• 1991

The process of solidification of metal is accompanied by liquid-solid change and known as Stefan's heat conduction problem on the moving boundary. In this study the temperature distribution in ingot and metallic mould during casting was analyzed by the two dimensional heat conduction theory. The transient temperature distribution was numerically calculated using a finite element method on the nodal point of mesh screen representing ingot and mould cross section. The theory was applied on the casting of aluminum(purity ; 99%) in flat ingot mould of GC25. The analysis will make it possible to calculate an optimum mould shape of which temperature gradient becomes minimum.