• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.9-16
• /
• 2001

In this paper, general design process for Tracked Fighting Vehicle has been suggested. Stress analysis and optimal design for ply angle of IFV's composite upper hull has been calculated using KMA CIFV and it is contained exploratory development of design process. In this point, this paper applied composite to IFV's upper hull. Finite element mesh has been made using Matlab program, and we have analyzed stress based on the given material properties and ply arrangement. For each load condition, load distribution in plane and failure index are calculated by using Tasi-Hill criterion, which is composite failure criterion and analyzing change of failure index as change of ply angle. Finally, optimal ply angles of upper hull are calculated using KMA CIFV. We can estimate the decrease of weight for IFV's upper hull.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.300-310
• /
• 2001

In this paper, new gamut-mapping algorithm (GMA) that utilizes variable anchor points (center of gravity on the luminance axis) is proposed. The proposed algorithm increases luminance range, which is reduced from conventional gamut mapping toward an anchor point. In this process, this algorithm utilizes multiple anchor points with constant slopes to both reduce a sudden color change on the gamut boundary of the printer and to maintain a uniform color change during the mapping process. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.4
• /
• pp.81-94
• /
• 1999

Organization change projects such as Business Process Redesign(BPR) have been implemented by many firms for enhancing their organizational performance. However, management is reluctant to initiate these projects due to enterprise-wide impact and steeper project cost than the traditional system development projects. Thus, there emerges a need to accurately assess the value of the redesigned organizational process for the successful implementation of BPR projects. The purpose of this study is to assess the value of process redesign in the point of resource utilization and allocation, and cycle time and cost reduction. The candidate process and the design alternatives are identified from organizational requirements analysis. The variables and their relations are defined to perform task activity analysis, bottleneck analysis, cycle cost analysis, and resource utilization analysis. A Case study of a manufacturing company indicates that the assessments method proposed in this study is a promising approach to identify the business alternative process that lead to the highest organizational performance.

• The Journal of Society for e-Business Studies
• /
• v.3 no.2
• /
• pp.141-160
• /
• 1998

In order to achieve a successful introduction of CALS, an enterprise model which is a concise description of what an enterprise does is required. The enterprise model mainly consists of a process model and a data model. The process model describes processes that create, change, combine, or destroy the entities within the enterprise. Several process modeling methodologies have been proposed. Each modeling methodology requires its own modeling view point, elements, and syntax. In developing a process model for CALS, these models created at different view points are required to analyze and design a system in a broad view. This paper aims at proposing an integration methodology for a process model. Specifically, IDEF0, IDEF3, and Petri Net are considered to be integrated. An IDEF0 model describing static functions of enterprise is transformed to an IDEF3 model describing behaviour of a system with additional information. Also, the IDEF3 model is transformed to a Petri Net model. These transformations will be automatically accomplished once the additional information for the transformation is provided.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.206-211
• /
• 2005

The device makers want to make higher density chips on the wafer through scale-down. The change of WSix/poly-Si gate film thickness is one of the key issues under 100 nm device structure. As a new device etching process is applied, end point detection(EPD) time delay was occurred in DPS+ poly chamber of Applied Materials. This is a barrier of device shrink because EPD time delay made physical damage on the surface of gate oxide. To investigate the EPD time delay, the experimental test combined with OES(Optical Emission Spectroscopy) and SEM(Scanning Electron Microscopy) was performed using patterned wafers. As a result, a EPD delay time is reduced by a new chamber seasoning and a new wavelength line through plasma scan. Applying a new wavelength of 252 nm makes it successful to call corrected EPD in WSix/poly-Si stack-down gate etching in the DPS+ poly chamber for the current and next generation devices.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.109-116
• /
• 1996

This work is a fundamental study for applying hybrid process coupling adsorption with microfiltration to waste-water treatment. Phenol was separated by adsorption on powdered activated carbon, adsorbed phenol with activated carbon was separated by microfiltration. As the particle size in suspension increased, filtration resistance decreased, and effect of particle concentration on resistance was less pronounced. The rate of uptake was greatly dependent on the degree of phenol loading. For a smaller amounts of activated carbon, the change of permeate concentration before break point and phenol loading with time were steeper than in the case of large amounts. Permeate concentration before break point decreased with decreasing particle size, this could be due to the increase of outer surface of particle and film mass transfer coefficient.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.511-520
• /
• 2010

In general, spot welding is used at no welding rod or flux for the process, low welding point temperature compared to arc welding, short heating time, less damage to the parent material, and low deformation and residual stress, relatively. Also, because of the pressurization effect, better mechanical qualities of the welding parts are obtained. Therefore, in various fields of industry its rapid operation speed can make mass production possible such as motor industry. In FEM analysis for the spot welding process, it is effective to use simple modeling rather than complicated one because of its numerous number of spots and reduction of analysis time. Therefore, this study provides with not only simplification of modeling analysis by using beam component composition of structure without re-compositing the spot welding point mesh but also modeling analysis of which property of fracture strength is reflected. In addition complete spot welding model is examined at rectangular post shape (hat shape) by impact test, compared the results, and verified its validity. As a result, it is possible to optimize the welding position and to recognize the strength of structure and the proposed equal distance model shows the effect of welding point reduction and improvement of stiffness.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.75-85
• /
• 1980

The consumer affair is one of the rapidly evolving problems in the process of recent economic growth. As the society and its economy changes, the nature and the scope of the consumer affairs also changes. while the main concept of the consumer affaires originated from the market mechanism, it is now expanding beyond the market mechanism to include everyday lives of consumers. In solving the problems which arise form the status difference between the manufacturer and the consumer the manufacturer's action is no less important the consumer's self-improvement of its status. The manufactures with the purpose of getting maximum profits from the consumers are conducting the consumer oriented managerial marketing, but this sis done form the manufacturer's point of view with the consumer's position being neglected. It is the purpose of this paper to investigate the nature and direction of the marketing from the consumer's position being neglected. It is the purpose of this paper to investigate the nature and direction of the marketing from the consumer's point of view. For this study a couple of pre-investigations were done. First, I surveyed the changing consumers with economic growth the developing process of marketing, and the cause and characteristics of the today's consumer affaires. Second, I studied the concept change of the modern marketing, and the concept of the consumerism which was materialized by this concept change. I further studied, with the consumer's point of view, the socioecological marketing which is based on the consumerism. The conclusion of this investigation is that the manufacturers should convert the in humanized marketing to the more human and environment conscious socioecological marketing because the consumer affairs which arise from the mass consumption of the modern days are expanding to include everyday's problems. This conversion naturally should be based on the human concept based consumerism. To be more effective, the manufactures should assume more social responsibilities and conduct the socioecological marketing voluntarily and willingly.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.90-90
• /
• 2017

Cold spray (Cold gas dynamic spray, kinetic spray) is the latest spray coating process that is known as solid state deposition process. In cold spray, inert gases (typically nitrogen and helium) accelerate powder particles prior to impact onto the substrate. Accelerating particles start to deposit onto the substrate after reaching certain critical velocities depending on the coating materials and substrate. Since process gas temperatures are kept below to melting temperature of the coating materials, it is possible to spray temperature sensitive materials such as copper and titanium, nanocrystal materials, and amorphous metals without affecting the phase change and oxide formation. It is also possible to deposit thick coatings because cold spray coatings present compressive residual stresses. This ability to deposit thick coatings is suitable to repair or rebuild parts as an additive manufacturing process. In this presentation, cold spray is introduced and compared to other additive manufacturing processes such as laser and electron beam based processes. It is also presented some applications especially in the view point of additive manufacturing process.