• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.96-108
• /
• 2003

Agricultural water occupies the largest portion of total water use in Korea, and generally researches on the development of agricultural water have been stressed on the demand of agricultural water itself. But it is unavoidable to change a policy from the development of water resources to cope with the increase of water demand to the effective management of existing water resources. Evaluation of the decrepitude of irrigation facilities and their reasonable maintenance are important for the effective supply and use of agricultural water. Therefore it is necessary to develop evaluation technique that diagnoses the current condition of irrigation canals and suggest a countermeasure to improve the found problems. 25 items in 6 classes were selected for the evaluation of irrigation canal systems, and the weighted value between the items was calculated using AHP (Analysis Hierarchy Process) method. The current condition of the irrigation facilities was evaluated from the class evaluation marks, and ranking was decided from the total marks between the projects, and finally the priority of the project for the improvement was given.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.265-268
• /
• 2006

The superplastic forming/diffusion bonding is widely accepted as an advanced technique for forming complex industrial components. But the superplastic forming process requires much forming time and generates excessive thinning thickness distribution of formed part. Superplastic in materials is only achieved in a narrow range of strain-rate with optimum value unique to each material. In this study, finite element analysis for surperplastic forming/diffusion bonding (SPF/DB) processes of three-sheet and four-sheet sandwich parts. From this study, forming analysis have offered a lot of information for developing the forming process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.102-111
• /
• 2017

An automobile ball joint is the element for connecting the control arm and the knuckle arm, allowing rotational motion. The ball joint consists of the stud, plug, socket, and seat. These components are assembled through the caulking process that consists of plugging and spinning. In the existing research, the pull-out strength and gap stiffness were calculated, but we did not consider the uncertainties due to the numerical analysis and production. In this study, the uncertainties of material property and tolerance are considered to predict the distributions of pull-out strength and gap stiffness. Also, pull-out strength and gap stiffness are predicted as the a distribution rather than one deterministic value. Furthermore, a robust design applying the Taguchi method is suggested.

• Journal of the Korean Home Economics Association
• /
• v.42 no.9
• /
• pp.19-35
• /
• 2004

Creative design acquires value-added quality in fashion business. The anti-aesthetic Belgian designers who have been rebelling within strict rules are admired internationally, having reached the top-ten lists in the Journal do Textile in the 1990s. Moreover, they have set the trend in new progressive fashion. In the age of domination by marketing, these people have succeeded in, their integrity, their free spirits, and their passion for what they do. The interaction between their creativity, which is visible throughout their design process, and commercial interests is the key to the success of Belgian fashion. It is also noteworthy that the designing process is strongly linked together with flexible coordination. This analysis on the creativity of Belgian fashion design based on theoretical studies and interviews with Belgian designers from magazines and newspapers. The research includes the following main topics: 1. Analysis on the creativity of designing process. 2. Analysis on characteristics of Belgian fashion design.

• Transactions of Materials Processing
• /
• v.10 no.4
• /
• pp.329-337
• /
• 2001

The finite element simulation model and the program to calculate the reverse moment have been developed to analyse the stress state and deformation of pipe bending using local induction heating with small bending radius in this study. The reverse moment that is to be applied on the bending arm to control the wall thinning ratio of the bending outside to within a particular value. Even though the demand of pipes with small bending radius is increasing in power plants and ship buildings, the welded elbows are still widely used. The bending process with or without a reverse moment acting on the bending arm has been simulated. The reverse moments calculated from the developed program are in good agreement with the finite element simulations and the experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.639-645
• /
• 2013

The aim of the study is to investigate the method to estimate a storage life of propelling charge on the decrease of muzzle velocity by stochastic gamma process model. It is required to establish criterion for state failure to estimate the storage life and it is defined in this paper as a muzzle velocity difference between reference value and maximum allowable standard deviation multiplied by 6. The relationship between storage time and muzzle velocity is investigated by nonlinear regression analysis. The stochastic gamma process model is used to estimated the state distribution and the life distribution for storage time for 155mm propelling charge KM4A2 because the regression analysis is a deterministic method and it can't describe the distribution of life for storage time.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.1-17
• /
• 2002

Business environment for e-commerce companies have been rapidly changed for the last several yens and they have found out that strategic alliance as one of the important and practical means to cope with the dynamic environment. Despite the increasing number of e-commerce company's strategic alliances during last several years, there have been few studies made on strategic alliance which reflect the e-commerce company's uniqueness： dynamism, time to market, If-based business, etc. In order to reflect this uniqueness, we attempt to derive guidelines of alliance process for e-commerce companies in three aspects： 1) resource system analysis, 2) value chain analysis, and 3) If-based strategic alliance implementation and management. Finally, we propose the integrated process of strategic alliance for e-commerce companies including those proposed guidelines.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.130-131
• /
• 2005

In the era of submicron devices, super ultra thin gate oxide characteristics are required. Titanium silicide process has studied gate oxide reliability and dielectric strength characteristics as the composition of gate electrode. In this study the author observed process characteristics on MOS structure. In view point of the process characteristics of MOS capacitor, the oxygen & Ti, Si2 was analyzed by SIMS analysis on before and after annealing with 1,2 step silicidation, the Ti contents[Count/sec]of $9.5{\times}1018$ & $6.5{\times}1018$ on before and after 2'nd anneal. The oxygen contents[Count/sec] of $4.3{\times}104$ & $3.65{\times}104$, the Si contents[Count/sec] of $4.2{\times}104$ & $3.7{\times}104$ on before and after 2'nd anneal. The rms value[A] was 4.98, & 4.03 on before and after 2'nd anneal.

• International Journal of Reliability and Applications
• /
• v.14 no.1
• /
• pp.41-54
• /
• 2013

In this paper, cost analysis is conducted using inter-failure interval under renewable warranty subject to imperfect repair for multi-component system. One way to model the imperfect repair is to use the quasi-renewal process (Wang and Pham 1996). Two alternative quasi-renewal processes were suggested by Park and Pham (2010) using quasi-renewal process; first is an altered quasi-renewal process with random variable parameter and second is a mixed quasi-renewal process considering replacement service and repair service, simultaneously. In this study, we use the altered and mixed quasi-renewal processes and develop the warranty cost model to obtain the expected value of warranty cost and to help company make important decisions regarding the warranty policy. Numerical examples are used to demonstrate the applicability of the methodology derived in the paper.

• Transactions of Materials Processing
• /
• v.30 no.4
• /
• pp.179-185
• /
• 2021

Lithium ion batteries are generally manufactured by laser and etching using aluminum thin sheet. These processes are relatively expensive and have low productivity. In this study, blanking process of aluminum thin sheet for lithium ion battery was employed to replace laser cutting and etching process, all to reduce the production cost and improve productivity. Mechanical properties for aluminum and coating were determined by experimental results and rule of mixture for FE analysis of blanking process. Normalized Cockcroft-Latham criteria was also applied to describe shear behavior and critical damage values were determined by comparison of analytical and experimental result. We performed FE analysis to investigate the effects of clearance and punch-die radius on sheared surface of aluminum thin sheet and to determine optimal process condition. We manufactured the die set using the determined optimal process and conducted an experiment to confirm the feasibility of blanking process. The sheared surface of manufactured product was observed by optical microscope. As a results, the proposed process conditions successfully achieved the dimensional requirement in production of lithium ion battery parts.