• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2519-2528
• /
• 2013

The standard of estimate is being used as basic material for appropriating construction expenses of public institutions and private institutions. The present thesis aims to propose a new form of a standard of estimate and a calculation method of work amount of equipment by targeting a representative construction type selected at river reservation work. The present thesis expects that the convenience of users can be expanded by improving applicability of a standard of estimate and simplifying a calculation process of work amount of equipment in a process planning stage so that the provision of work crew lineup information and daily productivity information is possible by a standard of estimate. In case of river conservation work, because the variables called work conditions act very largely, there exists much difficulty for generalizing productivity information and work amount of equipment, but if its accuracy could be enhanced by improving continuous productivity information and work amount information of equipment, the simplification of process planning establishment and cumulative process through a standard of estimate would be possible.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.105-111
• /
• 2010

The air logistics process is complex and need many informations because various agencies participate in the logistics service and there are many stakeholders in air logistics. But it is hard to improve the infra of facilities because of an enormous expense, so it needs to simplify air logistics process for growing air freight. When documents are sent, it needs to change the form of documents in spite of same document due to different form by agencies. Also documents are changed even though different documents have same informations. Consequently, errors are increased because the names of the same data are different from each other and stakeholders reproduce the documents. In order to mitigate these problems, we selected documents and analyzed data of documents for the interface optimization in general air logistics process. Next, we unified the names of data and defined contents of data. Also we set the type of the defined data on DB type, and gave the code to the defined data. It made easy to exchange informations among the stakeholders to match documents corresponding with the defined data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.881-889
• /
• 2016

The VE evaluation process, in which the value is composed of the cost and the function, should have a characteristic of quantitative analysis based on specific figures rather than qualitative approach. However, most of the VE evaluation performed domestically have a problem of having no systematic process of quantification of the function, even though the cost is estimated and analyzed quantitatively. Moreover, in addition to the tendency of strong practical experience, the VE evaluation has the problem of limited application of practical scientific analysis caused by declining the suggestion of creative opinions by over quantification or over objectification. This paper presents the suggestions for improvement of VE evaluation processes, which satisfies the aspects of simplification and objectification, without hindering the essence of the evaluation in the practical business point of view.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.80-84
• /
• 2015

We suggest new emitter formation method using solid-phase epitaxy (SPE); solid-phase epitaxy emitter (SEE). This method expect simplification and cost reduction of process compared with furnace process (POCl3 or BBr3). The solid-phase epitaxy emitter (SEE) deposited a-Si:H layer by radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) on substrate (c-Si), then thin layer growth solid-phase epitaxy (SPE) using rapid thermal process (RTP). This is possible in various emitter profile formation through dopant gas ($PH_3$) control at deposited a-Si:H layer. We fabricated solar cell to apply solid-phase epitaxy emitter (SEE). Its performance have an effect on crystallinity of phase transition layer (a-Si to c-Si). We confirmed crystallinity of this with a-Si:H layer thickness and annealing temperature by using raman spectroscopy, spectroscopic ellipsometry and transmission electron microscope. The crystallinity is excellent as the thickness of a-Si layer is thin (~50 nm) and annealing temperature is high (<$900^{\circ}C$). We fabricated a 16.7% solid-phase epitaxy emitter (SEE) cell. We anticipate its performance improvement applying thin tunnel oxide (<2nm).

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.153-159
• /
• 2010

The air logistics process is complex and needs many informations because various agencies participate in the logistics service and many stakeholders in air logistics. But it is hard to improve the infra of facilities because of an enormous expense, so air logistics process has to simplify for growing air freight. Nevertheless some documents are same, they should be changed due to different format. Also documents have to change even though different documents have same informations. Consequently, errors are increased because the names of the same data are different from each other and stakeholders have to reproduce the documents. In order to mitigate these problems, we selected documents and analyzed document data for the interface optimization in general air logistics process. Next, we unified the data names and defined contents of data. Also we set the type of the defined data on DB type, and gave the code to the defined data. It made easy to exchange informations among the stakeholders to match documents corresponding with the defined data. Finally, the simulation of air logistics processes was performed the quantitative analysis of the data that occur in the air logistics. In conclusion, we expect to reduce the inefficiency such as reproduction of data and the errors by improving the interface of information.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.81-87
• /
• 2023

Heaters using the resistance heating principle are used in various industrial fields that require heat and are also essentially used in bidet among small home appliances. A planar heater and a coil-inserted heater mounted on a conventional commercially used bidet have disadvantages and limitations of complicated manufacturing process and local heating. In this study, silver-palladium (Ag-Pd) powder material was used for a screen-printing process that is more advantageous in achieving simplification than the existing process, and a rod-type heater for bidet was manufactured. The on-off cycle test under actual conditions was conducted to confirm the durability and the capability of the fabricated heater, and the fabricated heater operated more than 2,600 on-off cycles, which means it could be applied for a commercial product. In addition, through the on-off cycles under harsh conditions, the cause of failure was identified after the test that the durability limit temperature of the heater was 850℃. Through Ag-Pd rod heater in this study, it is expected to contribute to the efficient development of electrode materials for heaters and the improvement of the durability of heaters in the future.

• Journal of Korean Academy of Nursing
• /
• v.54 no.1
• /
• pp.32-43
• /
• 2024

Purpose: This study aimed to determine the impact of an intervention using voice recording of family members on pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. Methods: A randomized control pre-post experimental design was implemented to 53 participants, with 27 and 26 participants in the experimental and control groups, respectively. A 70-second voice recording of a family member, repeated three times at 10-minute intervals was used as an intervention for the experimental group. Meanwhile, participants in the control group used headset for 30 minutes. Structured instruments were utilized to measure pain, anxiety, agitation, and the weaning process. Wilcoxon Signed Ranks test and the Mann-Whitney U test, or χ² test, were used for data analysis. Results: The experimental group exhibited significant decrease in pain (Z = - 3.53, p < .001), anxiety (t = 5.45, p < .001), and agitation (Z = - 2.99, p = .003) scores compared with those of the control group. However, there was no significant difference between groups in the weaning process' simplification (χ² = 0.63, p = .727). Conclusion: Intervention using family members' voice recording effectively reduces pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. This can be actively utilized to provide a more comfortable process for patients.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.45-56
• /
• 2012

Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1998

The idea of level-of-detail based on multiresolution model is gaining popularity as a natural means of handling the complexity regarding the realtime rendering of virtual environments. To generate an effective multiresolution model, we should capture the prominent visual features in the process of simplifying original complex model. In this paper, we incorporate view dependent features such as silhouette features and backface features, to the generation process of multiresolution model. To capture the view directional parameter, we propose multiresolution view sphere. View sphere maps the directional relationship between object surface and the view. Using the view sphere, coherence in the directional space is mapped into spatial coherence in the view sphere. View sphere is generated in multiresolution fashion to simplify the object. To access multiresolution view sphere efficiently, we devise quad tree for the view sphere. We also devise a mechanism for realtime simplification process using proposed view sphere. Using proposed mechanism, regenerating simplified model in realtime is effectively done in the order of number of rendered vertices.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.293-307
• /
• 1998

This study has been divided into two parts, 1) literature review and 2) a case study. Based on literature review and case studies found in Korea and abroad, this study aimed at classifying wildlife passages and establishing their development procedures in order to establish a theoretical ground for the development of wildlife passage as a way to link habitats that have been fragmented by the construction of roads and other developments. The results of the literature review are as follows : 1) Impact of road construction on surrounding ecological environment is found in various aspects. Along with damage of habitats as direct impact, decrease of biodiversity and simplification of species due to limited breeding and movement are cited as possible indirect impact. 2) In order to lessen the impact generated from fragmented habitats, various types of wildlife passage are being developed in Europe and are showing positive results. 3) In Korea, interests on animal passages have been rising recently. The ministry of Environment and local authorities are establishing development plans for the passages. However, practical materials on the usefulness of adoped methods are not available.4) In order to create an effective wildlife passage, decisions have to be made first on basic factors of planning and designing such as ecosystem rehabilitation methods and surveys on wildlife movement routes and habitat environment. Based on this, in a planning and designing stage, the location and type of a passage, size and measures to attract animals and prevent a collision need to be finalized. This should be followed by a series of process of maintenance, management and monitoring after the development. Based on the results of a theoretical study to develop an wildlife passage, Part 2 of this study deals with the results of an experiment through a specific planning and design that includes a process of ecological surveys, site selection, type selection, ecosystem infrastructure, planting design and construction details on an actual study area and presents them as a model project.