• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1510-1513
• /
• 2005

The luminescent properties of $Eu^{3+}$ and $Sm^{3+}$ doped potassium tungstate phosphor were investigated. The $K_{4-3x}(WO_4)_2:Eu_x$, $Sm_y$ phosphor was produced by firing the mixed precursors, followed by re-firing with a flux. The re-firing process provided the clean surface to the particles. The excitation spectra showed that the strong absorption in the region of ultra violet light occurred due to the high europium doping concentration. The incorporation of europium to potassium tungstate was easier, compared to other host materials. The excitation spectra could be controlled by the small addition of samarium. The increase of energy absorption around 405nm was assigned to the $Sm^{3+}$ ions. The comparison between real x-ray diffraction and simulated one revealed that the crystal structure of $K_{4-3x}(WO_4)_2:Eu_x,Sm_y$ phosphor is monoclinic with a space group, C2/c.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.2
• /
• pp.299-304
• /
• 2003

Static mixer consists of a straight pipe of circular cross section into which individual elements are inserted to cut, fold, twist and re-combine the mixing fluid. The number of elements and their shape required in any application depend on the complexity of the mixing process. The objectives of this study are to develop a new static mixer and to perform the experimental investigation of pressure drop in order to evaluate the performance of the new one. The mixing fluid used is Glycerin. The pressure drop is measured using a hydraulic manometer and the correlation of Z-factor is suggested as a function of Re. The Z-factors of SSC and YNU mixer are about 40% lower than and 4% higher than that of the Sulzer one.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.301-311
• /
• 2000

For effective part modifications which is necessary in the design process frequently, variational geometric modeling with constraint management being used in a wide. Most variational geometric modeling methods, however, manage just the constraints about sketch elements used for generation of primitives. Thus, not only constraint propagation but also re-build of various modeling operations stored in the modeling history is necessary iota part geometry modifications. Especially, re-build of high-cost Boolean operations is apt to deteriorate overall modeling efficiency abruptly. Therefore, in this paper we proposed an algorithm that can handle all geometric entities of the part directly. For this purpose, we introduced eight type geometric constraints to the various geometric calculations about all geometric entities in sweepings and Boolean operations as well as the existing constraints of the sketch elements. The algorithm has a merit of rapid part geometric modifications through only constraint propagation without rebuild of modeling operations which are necessary in the existing variational geometric modeling method.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.526-532
• /
• 2004

A motionless mixer consists of a straight pipe or transfer tube containing the mixing elements that are used to cut, fold, twist, and re-combine the mixing fluid. The number of elements and their shape required in any application depend on the complexity of the mixing process. The objectives of this study are to develop new motionless mixers and to perform the experimental investigation of pressure drop in order to evaluate the performance of the new ones. Glycerin is used as a mixing fluid. Pressure drop is measured using a hydraulic manometer and correlations of friction factor are proposed as a function of Re. The friction factors of Sulzer SMX mixer are in qualitative good agreement with the published data. On the average, the friction factors of SSC and YNU mixers are about 36% lower than and 6% higher than that of the Sulzer one.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.179-181
• /
• 1999

본 논문에서는 내장 실시간 시스템(real-time embedded system)에서의 성능 재조정(re-engineering) 문제를 다룬다. 성능 재조정 문제는 하드웨어와 소프트웨어가 이미 구현된 상태에서 새로운 성능조건이 요구될 때 이를 만족시키도록 시스템을 수정하는 문제이다. 본 논문에서의 성능 요구조건은 시간당 처리량(throughput)이나 입출력 지연시간(input-output latency)등이 고려된다. 제안된 방법은 병목점 분석(bottleneck analysis)과 비선형 최적화를 이용한다. 이를 위해 프로세스 네트워크(process network)로 표현된 시스템 디자인과 태스크 그래프, 태스크 할당(allocation)과 스케쥴링, 그리고 새로운 성능조건인 실시간 처리량을 입력으로 사용한다. 제안된 방법은 두 단계로 구성된다. 첫째, 프로세스 네트워크에서 프로세스의 지연시간을 계산하여 병목이 되는 프로세스를 찾아낸다. 둘째, 프로세싱 요소의 성능 개선율(performance scaling factor)을 변수로 하여 주어진 성능을 만족시키기 위한 시스템 제약조건을 유도한다. 이를 사용하여 하드웨어의 업그레이드 비용을 최소화하도록 제약조건을 풀고 각 프로세싱 요소(processing element)에 필요한 성능개선율을 구한다. 제안된 방법은 기존에 구성된 소프트웨어의 구조를 고치기 않기 때문에 재조정의 시간을 줄일 수 있게 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2014

Digital watermarking techniques are attracting attention as a proper solution to protect copyright for multimedia data. This paper proposes a new audio watermarking method based on Discrete Cosine Transformation (DCT) and Discrete Wavelet Transformation (DWT) for copyright protection. In our proposed watermarking method, the original audio is transformed into DCT domain and divided into two parts. Synchronization code is applied on the signal in first part and 2 levels DWT domain is applied on the signal in second part. The absolute value of DWT coefficient is divided into arbitrary number of segments and calculates the energy of each segment and middle peak. Watermarks are then embedded into each middle peak. Watermarks are extracted by performing the inverse operation of watermark embedding process. Experimental results show that the hidden watermark data is robust to re-sampling, low-pass filtering, re-quantization, MP3 compression, cropping, echo addition, delay, and pitch shifting, amplitude change. Performance analysis of the proposed scheme shows low error probability rates.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.2
• /
• pp.37-45
• /
• 2010

Requirements engineering is an important phase in a system's life cycle. It is important to perform it correctly. The increasing complexity of systems makes requirements engineering activities more difficult. Non-functional requirements are drivers to emerge how much emergent system properties to aim for success. All functional requirements may be satifsfied, but if the level of desired non-functional requirements are overlooked, the system development will fail. There is growing awareness of the importance of defining non-functional requirements early in the process among the requirements engineering (RE) community. This paper propses a SysML based approach for non-functional requirements to identify and specify very early in the process or requirements engineering.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.588-595
• /
• 2009

The knowledge of grain growth of carbide particles is very important for manufacturing micrograined cemented carbides. In the present study, continuous and discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides is investigated using the Monte Carlo computer simulation technique. The Ostwald ripening process (solution/re-precipitation) and the grain boundary migration process are assumed in the simulation as the grain growth mechanism. The effects of liquid phase fraction, grain boundary energy and implanted coarse grain are examined. At higher liquid phase content, mass transfer via solid/liquid interfaces plays a major role in grain growth. Growth rate of the implanted grain was higher than that of the matrix grains through solution/re-precipitation and coalescence with neighboring grains. The results of these simulations qualitatively agree with experimental ones and suggest that distribution of liquid phase and carbide particle/carbide grain boundary energy as well as contamination by coarse grain are important factors controlling discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides. The contamination by coarse grains must by avoided in the manufacturing process of fine grain cemented carbides, especially with low Co.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.930-937
• /
• 2007

In this paper, we address a design problem and a case study of a K-stage inspection system, which is composed of K stages, each of which includes an inspection process and a rework process. Assuming the type I and II errors of inspectors and the re-inspection policy for items classified as good, we determine the smallest integer of K which can achieve a given target defective rate. If K does not exist, holding the current values of the type I, II errors, we search reversely a new vector, (the defective rate of an assembly line, the defective rate of a rework process), which can give the target defective rate. Our formulas and methodology based on our K-stage inspection system could be applied and extended to similar situations with slight modifications.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.89-96
• /
• 1998

LOM (Laminated Object Manufacturing) process is one of rapid prototyping processes, where shapes are formed by accumulating cross sections of laser-cut paper. The process expects wide popularity since it is simple and the material is familiar to conventional mockup makers. However the dimensional accuracy of LOM parts is not so good as that of traditional wooden mockups, since the stack of adhesive-spread papers causes significant dimensional error. Also it is unclear how the other unknown environmental effects cause the errors as well. In this work the dimensional errors of LOM parts are measured and analysed. Experiments with test parts were performed in order to see the effects of part shape, moist, and sealer on dimensional variations. The characteristic of the paper is also analysed. Re-heating LOM parts, which is shown to have the effect of recovering dimensional changes, is applied to an example part.