• 한국환경보건학회지
• /
• 제18권2호
• /
• pp.67-74
• /
• 1992

The lab-scale biological A$_{2}$O system was applied from treating piggery wastewater highly polluted organic material which nitrogen and phosphorous are much contained relatively in conversion with other wastewater. The objective of this study was to investigate the effect of variance parameters on the treatability of this system according to operation conditions. An obtained experimental data were analysed by using principal component analysis (PCA) method. The results are summarized as follows: 1. From Varimax rotated factor loading in raw wastewater, variance of factor 1 was 36.8% and cumulative percentage of variance from factor 1 to factor 4 was 81.5% and of these was related to BOD, TKN and BOD loading. 2. In anaerobic process, variance of factor 1 was 33.5% and cumulative percentage of variance from factor I to factor 4 was 81.8% and of these was related to PO$_{4}$-P, BOD, DO and Temperature. 3. In anoxic process, variance of factor 1 was 30.1% and cumulative percentage of variance from factor i to factor 4 was 84.3% and of these was related to pH, DO, TKN and temperature. 4. In aerobic process, variance of factor 1 was 43.8% and cumulative percentage of variance from factor 1 to factor 4 was 81.5% and of these was highly related to DO, PO$_{4}$-P and BOD. 5. It was better to be operated below 0.30 kg/kg$\cdot$day F/M ratio to keep over 90% of BOD and SS, 80% of TKN, and 60% of PO$_{4}$-P in treatment efficiencies. 6. Treatment efficiencies was over 93% of BOD and SS, 81% of TKN and 60% of PO$_{4}$-P at over 20$^{\circ}$C, respectively.

• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.237-246
• /
• 2009

In this paper, we propose development of new products including the proposed process of at the customer's requirements. The success of new product development depends on customer satisfaction in the marketplace. Existing product development process, including the customer's interest was weak. In this paper, we propose development of new products which include Kano's attractive quality factor method and Timko's customer satisfaction index method. Also we verified new medical treatment of incontinence-nency which is applied to the proposed process.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2009년도 추계학술대회
• /
• pp.31-47
• /
• 2009

In this paper, we propose development of new products including the proposed process of at the customer's requirements. The success of new product development depends on customer satisfaction in the marketplace. Existing product development process, including the customer's interest was weak. In this paper, we propose development of new products which include Kano's attractive quality factor method and Timko's customer satisfaction index method. Also we verified new medical treatment of incontinence-nency which is applied to the proposed process.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.83-97
• /
• 2009

In this paper, we propose development of new products including the proposed process of at the customer's requirements. The success of new product development depends on customer satisfaction in the marketplace. Existing product development process, including the customer's interest was weak. In this paper, we propose development of new products which include Kano's attractive quality factor method and Timko's customer satisfaction index method. Also we verified new medical treatment of incontinence-nency which is applied to the proposed process.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.837-848
• /
• 2006

This paper presents the test results of biological aerated filtration(BAF) process to replace activated sludge process by enhancing treated effluent quality and reducing the costs. In BAF process both BOD and SS compounds in wastewater are degraded and removed by biological reaction and filtration. Upflow BAF with expanded polypropylene media and downflow BAF with ceramic media were used to investigate the effects of hydraulic and organic loads on effluent quality. As a result, in BAF processes which has different media, upflow BAF reactor shows 5% higher efficiency than downflow BAF and this phenomena caused by backwashing methods and operational conditions. The results of influence factors analyzed by Factor Analysis Method in BOD and SS treatment efficiency are the size of media, hight of media bed and type of media. The quantitative effects of media size are 5.73% in TBOD, 5.78% in SBOD and 7.65% in TSS, so we confirmed the main factor is media size.

• Current Photovoltaic Research
• /
• 제6권1호
• /
• pp.27-30
• /
• 2018

The dependency of the electrical characteristics of silicon solar-cells on the depth of damaged layer induced by wire-sawing process was investigated. To compare cell efficiency with residual sawing damage, silicon solar-cells were fabricated by using as-sawn wafers having different depth of saw damage without any damaged etching process. The damaged layer induced by wire-sawing process in silicon bulk intensely influenced the value of fill factor on solar cells, degrading fill factor to 57.20%. In addition, the photovoltaic characteristics of solar cells applying texturing process shows that although the initial depth of saw-damage induced by wire-sawing process was different, the value of short-circuit current, fill-factor, and power-conversion-efficiency have an almost same, showing ~17.4% of cell efficiency. It indicated that the degradation of solar-cell efficiency induced by wire-sawing process could be prevented by eliminating all damaged layer through sufficient pyramid-surface texturing process.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.293-301
• /
• 2013

The purpose of this study is to introduce the limit of previously used six sigma quality process evaluation metrics, $Z_{st}$ and $P_{pk}$, and a solution to overcome this drawback by using a metric based on performance evaluation of Z-factor quality innovation. Case analysis on projects from national six sigma contest from 2011 to 2012 is performed and literature review on new drug development HTS (High Throughput Screening) is used to propose innovative performance evaluation metrics. This research shows that experimental study on six sigma evaluation metric, $Z_{st}$ and $P_{pk}$, have no significance difference between industrial type (Manufacturing, Semi-Public Institute, Public Institute) and CTQ type (Product Technology Type CTQ, Process Technology Type CTQ). Following discovery characterize this quality improvement as fixed target type project. As newly developed moving target type of quality innovation performance metric Z-Factor is used for evaluating experimental study, hypothetical analysis suggests that $Z_{st}$ and $P_{pk}$ share different relationship or even show reciprocal relationship. Constraints of the study are relatively small sample size of only 37 projects from past 2 years and conflict on having interview and communication with six sigma quality practitioner for qualitative experimental study. Both moving target type six sigma innovation project and fixed target type improvement project or quality circle enables efficient ways for a better understanding and quality practitioner use by applying quality innovation performance metric. Downside of fixed target type quality performance evaluation metric, $Z_{st}$ and $P_{pk}$, is presented through experimental study. In contrast, advantage of this study is that high throughput requiring product technology, process technology and quantum leap typed innovation effect is evaluated based on precision and accuracy and Z-Factor that enables relative comparison between enterprises is proposed and implemented.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.85-89
• /
• 2013

In the current domestic, many industrial accidents have happened. And these are analyzed according to several factors. But it is difficult that they evaluate their business safety. Thus, we conducted a study on business specific safety assessment techniques in order that business know their safety level and perform appropriative safety activities. Study methods are survey and AHP (Analytic Hierarchy Process). Each specific weighting factors to calculate the survey was conducted for safety and consulting experts (20 persons). Weight factor was used to AHP decision support as one of the ways through a number of alternatives to the ratings for the Minesota Multiphasic. Factors are each type of industry, specific industrial scale, disaster type and strength, worker age and tenure period, and region. First, survey was conducted with 20 professionals to estimate the weighting factors. Weights between factors using the AHP analysis tool based on the mean values were calculated. Second, last 3 years between the industrial accidents statistics were used to calculate the weights for each of the rating factors in the Occupational Safety and Health Agency. Grade weights between each factor which was based on the rating of each factor was calculated as the average of three years. Finally, the weights between each factor and the grade weights for each factor using the safety level of the enterprise were calculated so that you can evaluate the weighting.

• 대한환경공학회지
• /
• 제36권8호
• /
• pp.534-541
• /
• 2014

본 논문은 먹는물 처리공정에 적합한 고도산화공정 중 하나인 자외선/과산화수소공정의 효율적인 운전을 위한 최적 운전 조건을 도출하는 방법을 연구하였다. 자외선/과산화수소 공정에서 대상물질의 제거효율을 예측하고 그에 따른 운전조건을 도출하기 위한 핵심 인자인 수산화라디칼 소모인자를 보다 쉽고 빠르게 측정하기 위해 새로운 지표물질인 로다민 비(Rhodamin B, RhB)를 선정하여 검증하였다. 그 결과, 기존 지표물질인 para-Chlorobenzoic acid (pCBA)와 비교해 약 1.1% 이하의 오차율로 높은 신뢰성을 가진 것을 확인하였다. 검증된 RhB를 이용하여 측정한 수산화라디칼 소모인자 및 모델링을 통해 대상물질(Ibuprofen)의 제거효율 예측 가능성을 평가한 결과, 실제 실험값과 평균 오차율 약 5% 내외로 거의 일치하였다. 약 8개월간의 자외선/과산화수소공정 파일럿 플랜트 유입수의 수산화라디칼 소모인자 모니터링 결과, 최대 두 배 정도의 차이로 크게 변화하였다. 이 차이는 미량오염물질 중 하나인 Caffeine의 목표 제거율을 만족하기 위한 자외선 에너지를 약 1.7배 증가시켜야 할 정도로 큰 값이다. 이상의 결과를 통해 자외선/과산화수소 공정을 안전하고 효율적으로 운전하기 위해서는 수산화라디칼 소모인자의 측정이 매우 중요하며, 측정된 소모인자, 자외선 흡광도($A_{254}$), 대상물질의 정보만 입력하면 자외선/과산화수소 공정을 쉽게 제어할 수 있음을 확인하였다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.144-150
• /
• 2005

Gas-assisted injection molding (GAIM) process is reducing the injection pressure during mold filling required as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process introduces new parameters and makes the application more difficult because the process interacts between gas and melt during injection molding process. Important GAIM factors that involved in this process include gas penetration design, locations of gas injection points, shot size, gas injection delay time as well as common injection molding parameters, gas pressure and gas injection time. In this study, the experiments were conducted to investigate effects of GAIM process variables on the gas penetration for PP and ABS moldings by changing gas injection point. Taguchi method was used fer the design of experiment. When the gas was injected at cavity's center, the most effective factor was shot size. When the gas was injected at cavity's end, the most effective factor was melt temperature. Injection speed was also an effective factor in GAIM process.